Temp gauge jumped ???????

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
lukescott
E30 Zone Regular
E30 Zone Regular
Posts: 665
Joined: Sat Aug 26, 2006 11:00 pm
Location: Dublin. N 53'23.311' W 006'06.242

Post Fri Dec 22, 2006 7:47 pm

The temp gauge on the 3181 cab did something strange today. It jumped from normal (middle of gauge) to next level and back again several times.Its not overheating at all. A friend of mine said it sounds like a loose connection in the sensor or similar. Any ideas please ???
marty1979
E30 Zone Newbie
E30 Zone Newbie
Posts: 108
Joined: Mon Nov 06, 2006 11:00 pm
Location: Bristol

Post Fri Dec 22, 2006 8:22 pm

Sounds like the nut on the back of the gauge is loose, I had the same thing. Just take out the instrument cluster and tighten the mother up, sorted it for me.
geo1400
E30 Zone Regular
E30 Zone Regular
Posts: 275
Joined: Mon Feb 20, 2006 11:00 pm
Location: Paphos, Cyprus

Post Fri Dec 22, 2006 9:02 pm

Like he said...
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Fri Dec 22, 2006 9:08 pm

Just to clarify a bit - the nut is on the back of the complete instrument cluster, directly behind the temp gauge. You don't have to take the cluster apart.
User avatar
lukescott
E30 Zone Regular
E30 Zone Regular
Posts: 665
Joined: Sat Aug 26, 2006 11:00 pm
Location: Dublin. N 53'23.311' W 006'06.242

Post Fri Dec 22, 2006 9:31 pm

Brianmoooore wrote:Just to clarify a bit - the nut is on the back of the complete instrument cluster, directly behind the temp gauge. You don't have to take the cluster apart.
So how do I get up at it please ?
Cloggy Saint
Old Skooler
Old Skooler
Posts: 8027
Joined: Sun Jan 09, 2005 11:00 pm
Location: zummerzet

Post Fri Dec 22, 2006 9:32 pm

you need to remove the cluster, but not open it up.
Image

E30 zone - promoting adult illiteracy since 2004
User avatar
Julian_Jules
E30 Zone Newbie
E30 Zone Newbie
Posts: 71
Joined: Tue Jun 07, 2005 11:00 pm

Post Tue Dec 26, 2006 1:39 am

i had something similar recently and tot of a loose connection too...BUT my service indicator was also on its last legs before the red service lite comes on.

Once I had it reset - all my temperature gauge jumpi-ness went off!

Strange but true.

Merry Xmas!
bottlecapE30
E30 Zone Regular
E30 Zone Regular
Posts: 481
Joined: Tue Jan 11, 2005 11:00 pm
Location: Baltimore, MD USA

Post Tue Dec 26, 2006 3:43 am

i had the same thing at first it was air in the coolant, so i beld it problem sloved. then a few weeks later the gague went loose gave it a few turns on the nut problem solved.
What is next? :roll:
Image
1987 2.7l e30 m20b27 supercharging
1991 3.5l e30 m30b35 it is dead so sad
1985 3.5l e23 m30b35
User avatar
lukescott
E30 Zone Regular
E30 Zone Regular
Posts: 665
Joined: Sat Aug 26, 2006 11:00 pm
Location: Dublin. N 53'23.311' W 006'06.242

Post Tue Dec 26, 2006 11:39 am

Julian_Jules wrote:i had something similar recently and tot of a loose connection too...BUT my service indicator was also on its last legs before the red service lite comes on.

Once I had it reset - all my temperature gauge jumpi-ness went off!

Strange but true.

Merry Xmas!
AHA....... My service indicator is nearing the red service light as well. I wonder if we have found something here. I really dont want to have to remove the cluster etc. The thought fills me with fear.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Tue Dec 26, 2006 1:46 pm

BMW service indicators work by electronics, not Voodoo! There is no connection at all between where a WORKING set of SI lights have counted down to and jumping temperature gauge needles.
User avatar
fugazi33
E30 Zone Newbie
E30 Zone Newbie
Posts: 213
Joined: Sat Sep 09, 2006 11:00 pm
Location: Bucks

Post Tue Dec 26, 2006 3:12 pm

I know if the batteries in the SI board have had it it can make the instruments play up, but that doesn't sound like the case here.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Tue Dec 26, 2006 3:18 pm

fugazi33 wrote:I know if the batteries in the SI board have had it it can make the instruments play up, .
This is because the batteries in the early type board go short circuit as they fail and drag down the power supply voltage to the other instruments.
Eventually the batteries leak corrosive goo which writes off the board.
User avatar
fugazi33
E30 Zone Newbie
E30 Zone Newbie
Posts: 213
Joined: Sat Sep 09, 2006 11:00 pm
Location: Bucks

Post Tue Dec 26, 2006 3:46 pm

Brianmoooore wrote:
fugazi33 wrote:I know if the batteries in the SI board have had it it can make the instruments play up, .
This is because the batteries in the early type board go short circuit as they fail and drag down the power supply voltage to the other instruments.
Eventually the batteries leak corrosive goo which writes off the board.
Yes I know, I've had it happen :cry:
bottlecapE30
E30 Zone Regular
E30 Zone Regular
Posts: 481
Joined: Tue Jan 11, 2005 11:00 pm
Location: Baltimore, MD USA

Post Wed Dec 27, 2006 5:13 am

http://www.beckerelectronics.com/BMW/se ... reset.html
this gos through how to reset your service lights when the inspection is due. also if you browes the site there is a write up on how to replace the si board.
Image
1987 2.7l e30 m20b27 supercharging
1991 3.5l e30 m30b35 it is dead so sad
1985 3.5l e23 m30b35