Temp gauge jumped ???????
Moderator: martauto
-
lukescott
- E30 Zone Regular

- Posts: 665
- Joined: Sat Aug 26, 2006 11:00 pm
- Location: Dublin. N 53'23.311' W 006'06.242
The temp gauge on the 3181 cab did something strange today. It jumped from normal (middle of gauge) to next level and back again several times.Its not overheating at all. A friend of mine said it sounds like a loose connection in the sensor or similar. Any ideas please ???
-
marty1979
- E30 Zone Newbie

- Posts: 108
- Joined: Mon Nov 06, 2006 11:00 pm
- Location: Bristol
Sounds like the nut on the back of the gauge is loose, I had the same thing. Just take out the instrument cluster and tighten the mother up, sorted it for me.
-
geo1400
- E30 Zone Regular

- Posts: 275
- Joined: Mon Feb 20, 2006 11:00 pm
- Location: Paphos, Cyprus
Like he said...
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Just to clarify a bit - the nut is on the back of the complete instrument cluster, directly behind the temp gauge. You don't have to take the cluster apart.
-
lukescott
- E30 Zone Regular

- Posts: 665
- Joined: Sat Aug 26, 2006 11:00 pm
- Location: Dublin. N 53'23.311' W 006'06.242
So how do I get up at it please ?Brianmoooore wrote:Just to clarify a bit - the nut is on the back of the complete instrument cluster, directly behind the temp gauge. You don't have to take the cluster apart.
-
Cloggy Saint
- Old Skooler

- Posts: 8027
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: zummerzet
-
Julian_Jules
- E30 Zone Newbie

- Posts: 71
- Joined: Tue Jun 07, 2005 11:00 pm
i had something similar recently and tot of a loose connection too...BUT my service indicator was also on its last legs before the red service lite comes on.
Once I had it reset - all my temperature gauge jumpi-ness went off!
Strange but true.
Merry Xmas!
Once I had it reset - all my temperature gauge jumpi-ness went off!
Strange but true.
Merry Xmas!
-
bottlecapE30
- E30 Zone Regular

- Posts: 481
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Baltimore, MD USA
i had the same thing at first it was air in the coolant, so i beld it problem sloved. then a few weeks later the gague went loose gave it a few turns on the nut problem solved.
What is next?
What is next?

1987 2.7l e30 m20b27 supercharging
1991 3.5l e30 m30b35 it is dead so sad
1985 3.5l e23 m30b35
-
lukescott
- E30 Zone Regular

- Posts: 665
- Joined: Sat Aug 26, 2006 11:00 pm
- Location: Dublin. N 53'23.311' W 006'06.242
AHA....... My service indicator is nearing the red service light as well. I wonder if we have found something here. I really dont want to have to remove the cluster etc. The thought fills me with fear.Julian_Jules wrote:i had something similar recently and tot of a loose connection too...BUT my service indicator was also on its last legs before the red service lite comes on.
Once I had it reset - all my temperature gauge jumpi-ness went off!
Strange but true.
Merry Xmas!
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
BMW service indicators work by electronics, not Voodoo! There is no connection at all between where a WORKING set of SI lights have counted down to and jumping temperature gauge needles.
-
fugazi33
- E30 Zone Newbie

- Posts: 213
- Joined: Sat Sep 09, 2006 11:00 pm
- Location: Bucks
I know if the batteries in the SI board have had it it can make the instruments play up, but that doesn't sound like the case here.
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
This is because the batteries in the early type board go short circuit as they fail and drag down the power supply voltage to the other instruments.fugazi33 wrote:I know if the batteries in the SI board have had it it can make the instruments play up, .
Eventually the batteries leak corrosive goo which writes off the board.
-
fugazi33
- E30 Zone Newbie

- Posts: 213
- Joined: Sat Sep 09, 2006 11:00 pm
- Location: Bucks
Yes I know, I've had it happenBrianmoooore wrote:This is because the batteries in the early type board go short circuit as they fail and drag down the power supply voltage to the other instruments.fugazi33 wrote:I know if the batteries in the SI board have had it it can make the instruments play up, .
Eventually the batteries leak corrosive goo which writes off the board.
-
bottlecapE30
- E30 Zone Regular

- Posts: 481
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Baltimore, MD USA
http://www.beckerelectronics.com/BMW/se ... reset.html
this gos through how to reset your service lights when the inspection is due. also if you browes the site there is a write up on how to replace the si board.
this gos through how to reset your service lights when the inspection is due. also if you browes the site there is a write up on how to replace the si board.

1987 2.7l e30 m20b27 supercharging
1991 3.5l e30 m30b35 it is dead so sad
1985 3.5l e23 m30b35

