MTECH2 KIT ON A CHROME BUMPER CAB

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
e30-unit-soldier
E30 Zone Regular
E30 Zone Regular
Posts: 551
Joined: Thu Nov 24, 2005 11:00 pm
Location: Bristol

Post Tue Dec 26, 2006 8:01 pm

Can any one tell me whats the best way to fit the mtech2 kit on my cab i know bits of the kit need to be cut and bumper mounts need to be swapped does anyone know exactly which ones?

All the help and info would be appriciated as im starting to fit the kit from tomorrow.
User avatar
kevin316i
E30 Zone Regular
E30 Zone Regular
Posts: 783
Joined: Mon Jan 10, 2005 11:00 pm

Post Wed Dec 27, 2006 1:40 am

The original motorsport convertibles had a type 2 MTEC bodykit which was fitted to the chrome bumpered body type. If you got one of these it should fit perfectly. I guess the MTEC kit you have came off a plastic bumpered car such as a 325i sport.

Suggest you have a look at the ETK for the MTEC bodykit as fitted to the original motorsport convertibles and cross check its fitting against the ones specified for the MTEC bodykit as fitted to the 325i sport.
iil325i
E30 Zone Regular
E30 Zone Regular
Posts: 589
Joined: Fri May 06, 2005 11:00 pm
Location: cambs

Post Wed Dec 27, 2006 11:24 am

the fogs are not the same you need the big fogs and front lower part
ImageImage
Richy325iTouring
E30 Zone Addict
E30 Zone Addict
Posts: 3490
Joined: Sun Jan 09, 2005 11:00 pm
Location: Newport SouthWales

Post Wed Dec 27, 2006 11:40 am

you will need the lower ront valance from a face lift car
the bumper brackets front and rear

the the kit will fit but the rear bumper will have a gap at th back because the arches are different

your best bet get a fberglass copy for the rear so it doesnt matter if you butcher it

try and get the gen stuff for the front

its easy ive done it in the past
Image