zoners, any idea on taking out a fog light bulb?
the furthest i got was disconnecting the socket from the back of the light, but then i got stuck.
Advice please with pictures would also be helpful
Thanks Zoners
fog light bulb replacement
Moderator: martauto
-
gazza
- E30 Zone Camper

- Posts: 1266
- Joined: Tue Feb 08, 2005 11:00 pm
- Location: north london/herts
if you have the cover removed ...thats the one held by 2 screws then you only have a wire clip to move before the bulb will come out (its on a piece of wire connected to a spade connector)...dont touch the bulb glass and refit is the reverse its easy really as you will find once you have done it
-
spence_star
- E30 Zone Regular

- Posts: 512
- Joined: Thu Nov 23, 2006 11:00 pm
- Location: London
ah ok i think i saw 2 screws when i looked under the bumper, the 2 screws are facing down right? I mean the philips head are visible as they face down towards the road.
Are they the 2 screws your talking about. Its jus so bloddy hard getting under the car because its soooo freakkkkkin low.
Are they the 2 screws your talking about. Its jus so bloddy hard getting under the car because its soooo freakkkkkin low.
Returned after many years out.
-
Gortour
- E30 Zone Team Member

- Posts: 9025
- Joined: Sat Sep 23, 2006 11:00 pm
- Location: Poole, Dorset
I've got the later E30 fogs, only one screw in each of mine, and they're underneath the light, as you say, screw heads facing the road. Undo the screw and then rotate. (On mine, anyway...)
Currently slumming it in an E46 Touring
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
There's a hard way and an easy way of doing most things!
The easy way is to remove the little plastic plug half way down one side of the front glass and unscrew the self tapper behind it. The whole light will then come out from the car through the front, and you can unscrew the two screws for the plate and change the bulb with ease.
The easy way is to remove the little plastic plug half way down one side of the front glass and unscrew the self tapper behind it. The whole light will then come out from the car through the front, and you can unscrew the two screws for the plate and change the bulb with ease.
