Evening all.
My speedo keeps dropping from the speed I'm at to 0mph grr! I also noticed that the MPG guage just goes off and sits at 0mpg.
Initially i thought it might of been the speedo cable but now I'm thinking I have a duff cluster, or atleast a duff SI board, am i right in this diagnosis?
cheers guys!
speedo and mpg guage
Moderator: martauto
-
Bob_S
- Engaged to the E30 Zone

- Posts: 5412
- Joined: Sat Jun 11, 2005 11:00 pm
- Location: chester, cheshire
Bollocks to this 24v scrap!
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Totally wrong in your diagnosis! Wrong end of the car!
There will be an internal break inthe wire where it comes from the speed sensor in the diff under the back of the car.
There will be an internal break inthe wire where it comes from the speed sensor in the diff under the back of the car.
-
Bob_S
- Engaged to the E30 Zone

- Posts: 5412
- Joined: Sat Jun 11, 2005 11:00 pm
- Location: chester, cheshire
bollocks i thought of that but i didnt think the mpg guage was related? actually makes sense now u say that, gay gay gay a job for tomorrow i think
Bollocks to this 24v scrap!
-
orangecurry
- E30 Zone Addict

- Posts: 2518
- Joined: Mon Apr 11, 2005 11:00 pm
- Location: West Sussex
Brian forgot to say...
'you can use the cable and plug/connector running from the front lights... from a breaker of course. Replace as much of the cable as you can from the diff to just before it disappears into the car body.'

'you can use the cable and plug/connector running from the front lights... from a breaker of course. Replace as much of the cable as you can from the diff to just before it disappears into the car body.'
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Didn't forget to type it - just too lazy, as my dinner was getting cold, and I can't type and eat at the same time!orangecurry wrote:Brian forgot to say...
'you can use the cable and plug/connector running from the front lights... from a breaker of course. Replace as much of the cable as you can from the diff to just before it disappears into the car body.'
Anyway, as orangecurry says, replace about 300mm of the cable and plug (or more if you like), as vibration will have "work hardened" the copper wire and made it brittle.
-
orangecurry
- E30 Zone Addict

- Posts: 2518
- Joined: Mon Apr 11, 2005 11:00 pm
- Location: West Sussex
Just make that sentence part of your sig 
-
Bob_S
- Engaged to the E30 Zone

- Posts: 5412
- Joined: Sat Jun 11, 2005 11:00 pm
- Location: chester, cheshire
not a problem for an electrician, cheers guys!
Bollocks to this 24v scrap!
