speedo and mpg guage

Need technical Q/A then you're in the right place

Moderator: martauto

Bob_S
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5412
Joined: Sat Jun 11, 2005 11:00 pm
Location: chester, cheshire

Post Sat Dec 23, 2006 8:16 pm

Evening all.

My speedo keeps dropping from the speed I'm at to 0mph grr! I also noticed that the MPG guage just goes off and sits at 0mpg.

Initially i thought it might of been the speedo cable but now I'm thinking I have a duff cluster, or atleast a duff SI board, am i right in this diagnosis?
cheers guys!
Bollocks to this 24v scrap!
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sat Dec 23, 2006 8:26 pm

Totally wrong in your diagnosis! Wrong end of the car!
There will be an internal break inthe wire where it comes from the speed sensor in the diff under the back of the car.
Bob_S
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5412
Joined: Sat Jun 11, 2005 11:00 pm
Location: chester, cheshire

Post Sat Dec 23, 2006 9:00 pm

bollocks i thought of that but i didnt think the mpg guage was related? actually makes sense now u say that, gay gay gay a job for tomorrow i think
Bollocks to this 24v scrap!
User avatar
orangecurry
E30 Zone Addict
E30 Zone Addict
Posts: 2518
Joined: Mon Apr 11, 2005 11:00 pm
Location: West Sussex

Post Sat Dec 23, 2006 10:12 pm

Brian forgot to say...

'you can use the cable and plug/connector running from the front lights... from a breaker of course. Replace as much of the cable as you can from the diff to just before it disappears into the car body.'

winkeye
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sat Dec 23, 2006 10:19 pm

orangecurry wrote:Brian forgot to say...

'you can use the cable and plug/connector running from the front lights... from a breaker of course. Replace as much of the cable as you can from the diff to just before it disappears into the car body.'

winkeye
Didn't forget to type it - just too lazy, as my dinner was getting cold, and I can't type and eat at the same time!
Anyway, as orangecurry says, replace about 300mm of the cable and plug (or more if you like), as vibration will have "work hardened" the copper wire and made it brittle.
User avatar
orangecurry
E30 Zone Addict
E30 Zone Addict
Posts: 2518
Joined: Mon Apr 11, 2005 11:00 pm
Location: West Sussex

Post Sat Dec 23, 2006 10:21 pm

Just make that sentence part of your sig :wink:
Bob_S
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5412
Joined: Sat Jun 11, 2005 11:00 pm
Location: chester, cheshire

Post Sun Dec 24, 2006 12:56 am

not a problem for an electrician, cheers guys!
Bollocks to this 24v scrap!