which way is better to make a 2.7

Need technical Q/A then you're in the right place

Moderator: martauto

DJ_B4L
E30 Zone Regular
E30 Zone Regular
Posts: 973
Joined: Sat May 14, 2005 11:00 pm
Location: Kent

Post Fri Dec 15, 2006 1:27 am

how many ways are there to make a 2.7 and what is the best way?
Last edited by DJ_B4L on Fri Dec 15, 2006 9:33 am, edited 1 time in total.
PIONEER AVIC X1, X1R, X1 BT LATEST SATNAV DISK WITH LATEST MAPS AND ALSO UPDATES FIRMWARE £20 POSTED PM FOR MORE DETAILS

Number plate for sale E30 2 HRD open to serious offers only will suit any E30
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Fri Dec 15, 2006 7:29 am

How much do you want to spend?
DJ_B4L
E30 Zone Regular
E30 Zone Regular
Posts: 973
Joined: Sat May 14, 2005 11:00 pm
Location: Kent

Post Fri Dec 15, 2006 9:32 am

i have a 2.7 already so jus wondering which ways there are to make them and what are the advantages between the two might be interested in making 1 for my cab
PIONEER AVIC X1, X1R, X1 BT LATEST SATNAV DISK WITH LATEST MAPS AND ALSO UPDATES FIRMWARE £20 POSTED PM FOR MORE DETAILS

Number plate for sale E30 2 HRD open to serious offers only will suit any E30
Templ8e30
E30 Zone Addict
E30 Zone Addict
Posts: 2801
Joined: Mon Jan 10, 2005 11:00 pm
Location: Ashton-under-Lyne, Lancashire

Post Fri Dec 15, 2006 12:11 pm

Best but most expensive way is to use a 525e or diesel crank with late 325i pistons in a 525e/325i block, 320i/323i/525e conrods, 325i head.

The block will need a shave as the pistons will sit too low in the bores.

Vernier pulley will also be required.

The machining for the block is the expensive part.

Easiest and cheapest way is to fit a 325i head onto a standard 525e bottom end.

Both methods use a 325i inlet manifold/injectors/afm etc

Cheers,

Iain T
Image
2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !
oze30
E30 Zone Addict
E30 Zone Addict
Posts: 4133
Joined: Mon Oct 24, 2005 11:00 pm
Location: Sydney

Post Fri Dec 15, 2006 3:59 pm

Templ8e30 wrote:Best but most expensive way is to use a 525e or diesel crank with late 325i pistons in a 525e/325i block, 320i/323i/525e conrods, 325i head.

The block will need a shave as the pistons will sit too low in the bores.

Vernier pulley will also be required.

The machining for the block is the expensive part.

Easiest and cheapest way is to fit a 325i head onto a standard 525e bottom end.

Both methods use a 325i inlet manifold/injectors/afm etc

Cheers,

Iain T
I have all these parts for sale br vernier pully. Was going to 2.7 mine, but going another way now.. as it turned out to be too expensive for me considering i lost my job!
DJ_B4L
E30 Zone Regular
E30 Zone Regular
Posts: 973
Joined: Sat May 14, 2005 11:00 pm
Location: Kent

Post Fri Dec 15, 2006 4:31 pm

isnt there a way to do it with a 320i head?
PIONEER AVIC X1, X1R, X1 BT LATEST SATNAV DISK WITH LATEST MAPS AND ALSO UPDATES FIRMWARE £20 POSTED PM FOR MORE DETAILS

Number plate for sale E30 2 HRD open to serious offers only will suit any E30
oze30
E30 Zone Addict
E30 Zone Addict
Posts: 4133
Joined: Mon Oct 24, 2005 11:00 pm
Location: Sydney

Post Fri Dec 15, 2006 4:46 pm

yeah.. but its still restrictive. best is to go for a minimum, eta bottom end and 325 head inlet/exhaust manifolds.

Cheaper option is stick the 320 head on it, it's still torquey, but not as free breathing as a 2.5
Expensive option is to:
eta crank,
eta rods,
early 2.5 pistons with the skirts machined to clear the crank webs,
2.5 head/inlet/exhaust manifold (or a 6 branch)
Vernier pulley and BBTB...

And that's close to if not on 200bhp with heaps of torque!
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Fri Dec 15, 2006 11:23 pm

My 2.7 is very basic,325 block;eta crank rods and pistons with new rings and a 320 head.Not yet run in but is real hooligan stuff.This afternoon I have been down to the Broads to check my boat out,2 hours each way,Friday traffic,no motorway,not above 3500rpm,258miles.The ability to pass traffic is awesome,what tuned ones with lumpy cams like temple30 and others use must be fantastic.I thought that new front discs and green stuff pads would be enough to control it but I am not so certain any more!!
Ant
Retired Team Member
Retired Team Member
Posts: 10496
Joined: Tue Dec 21, 2004 11:00 pm
Location: PD+E dept :D

Post Sat Dec 16, 2006 11:51 am

Bal, I'll have 2 freshly built 2.7 blocks in the unit as of Thursday next week, feel free to pop down for a gander mate, they are both hybrids bulit for different purposes

up to you fella !
Product Development and Endurance for Delphi.

Original performance chips, original works not unlicensed copies :D Email FTW