which way is better to make a 2.7
Moderator: martauto
-
DJ_B4L
- E30 Zone Regular

- Posts: 973
- Joined: Sat May 14, 2005 11:00 pm
- Location: Kent
how many ways are there to make a 2.7 and what is the best way?
Last edited by DJ_B4L on Fri Dec 15, 2006 9:33 am, edited 1 time in total.
PIONEER AVIC X1, X1R, X1 BT LATEST SATNAV DISK WITH LATEST MAPS AND ALSO UPDATES FIRMWARE £20 POSTED PM FOR MORE DETAILS
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
How much do you want to spend?
-
DJ_B4L
- E30 Zone Regular

- Posts: 973
- Joined: Sat May 14, 2005 11:00 pm
- Location: Kent
i have a 2.7 already so jus wondering which ways there are to make them and what are the advantages between the two might be interested in making 1 for my cab
PIONEER AVIC X1, X1R, X1 BT LATEST SATNAV DISK WITH LATEST MAPS AND ALSO UPDATES FIRMWARE £20 POSTED PM FOR MORE DETAILS
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
-
Templ8e30
- E30 Zone Addict

- Posts: 2801
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Ashton-under-Lyne, Lancashire
Best but most expensive way is to use a 525e or diesel crank with late 325i pistons in a 525e/325i block, 320i/323i/525e conrods, 325i head.
The block will need a shave as the pistons will sit too low in the bores.
Vernier pulley will also be required.
The machining for the block is the expensive part.
Easiest and cheapest way is to fit a 325i head onto a standard 525e bottom end.
Both methods use a 325i inlet manifold/injectors/afm etc
Cheers,
Iain T
The block will need a shave as the pistons will sit too low in the bores.
Vernier pulley will also be required.
The machining for the block is the expensive part.
Easiest and cheapest way is to fit a 325i head onto a standard 525e bottom end.
Both methods use a 325i inlet manifold/injectors/afm etc
Cheers,
Iain T

2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
I have all these parts for sale br vernier pully. Was going to 2.7 mine, but going another way now.. as it turned out to be too expensive for me considering i lost my job!Templ8e30 wrote:Best but most expensive way is to use a 525e or diesel crank with late 325i pistons in a 525e/325i block, 320i/323i/525e conrods, 325i head.
The block will need a shave as the pistons will sit too low in the bores.
Vernier pulley will also be required.
The machining for the block is the expensive part.
Easiest and cheapest way is to fit a 325i head onto a standard 525e bottom end.
Both methods use a 325i inlet manifold/injectors/afm etc
Cheers,
Iain T
-
DJ_B4L
- E30 Zone Regular

- Posts: 973
- Joined: Sat May 14, 2005 11:00 pm
- Location: Kent
isnt there a way to do it with a 320i head?
PIONEER AVIC X1, X1R, X1 BT LATEST SATNAV DISK WITH LATEST MAPS AND ALSO UPDATES FIRMWARE £20 POSTED PM FOR MORE DETAILS
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
Number plate for sale E30 2 HRD open to serious offers only will suit any E30
-
oze30
- E30 Zone Addict

- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
yeah.. but its still restrictive. best is to go for a minimum, eta bottom end and 325 head inlet/exhaust manifolds.
Cheaper option is stick the 320 head on it, it's still torquey, but not as free breathing as a 2.5
Expensive option is to:
eta crank,
eta rods,
early 2.5 pistons with the skirts machined to clear the crank webs,
2.5 head/inlet/exhaust manifold (or a 6 branch)
Vernier pulley and BBTB...
And that's close to if not on 200bhp with heaps of torque!
Cheaper option is stick the 320 head on it, it's still torquey, but not as free breathing as a 2.5
Expensive option is to:
eta crank,
eta rods,
early 2.5 pistons with the skirts machined to clear the crank webs,
2.5 head/inlet/exhaust manifold (or a 6 branch)
Vernier pulley and BBTB...
And that's close to if not on 200bhp with heaps of torque!
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
My 2.7 is very basic,325 block;eta crank rods and pistons with new rings and a 320 head.Not yet run in but is real hooligan stuff.This afternoon I have been down to the Broads to check my boat out,2 hours each way,Friday traffic,no motorway,not above 3500rpm,258miles.The ability to pass traffic is awesome,what tuned ones with lumpy cams like temple30 and others use must be fantastic.I thought that new front discs and green stuff pads would be enough to control it but I am not so certain any more!!
-
Ant
- Retired Team Member

- Posts: 10496
- Joined: Tue Dec 21, 2004 11:00 pm
- Location: PD+E dept :D
Bal, I'll have 2 freshly built 2.7 blocks in the unit as of Thursday next week, feel free to pop down for a gander mate, they are both hybrids bulit for different purposes
up to you fella !
up to you fella !
Product Development and Endurance for Delphi.
Original performance chips, original works not unlicensed copies
Email FTW
Original performance chips, original works not unlicensed copies
