Removing engine

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

oldroydsr4
E30 Zone Squatter
E30 Zone Squatter
Posts: 1579
Joined: Tue Oct 25, 2005 11:00 pm
Location: Warwick

Post Wed Dec 13, 2006 7:49 pm

Hi currently removing an m20b25 for a rebuild and turbo conversion

everything is done, ie labelled loom, engine mounts, exhaust etc

bar undoing the bell housing,

What tools do i require for this.

also anything to bear in mind when lifting the motor.(first time with the bmw)

Cheers
Chris-W
E30 Zone Team Member
E30 Zone Team Member
Posts: 7219
Joined: Tue May 24, 2005 11:00 pm
Location: South Cheshire

Post Wed Dec 13, 2006 8:42 pm

Set of torx sockets.
Image
Nelly
Gumbo
Gumbo
Posts: 4239
Joined: Mon Jan 10, 2005 11:00 pm
Location: Divorce Central

Post Wed Dec 13, 2006 8:46 pm

Pull the gear box out with the engine - so much easier to over haul small linkage parts on top of it + if it's really necessary to separate the gear box from the engine than it will be alot lot easier as well.

Neil.
Image

"I F**KING LOVE YOU GUMBO"
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Wed Dec 13, 2006 8:47 pm

Yup, gearbox comes out with the engine - ignore the Haynes manual. It's a bit tight between the PAS pump pulley and the front panel but it all comes out as one.
Nelly
Gumbo
Gumbo
Posts: 4239
Joined: Mon Jan 10, 2005 11:00 pm
Location: Divorce Central

Post Wed Dec 13, 2006 8:53 pm

^^ forgot to mention (cheers Andy) disconnect the pas pump and leave it hanging in the bottom of the bay - no need to take anything apart on the steering side of things.

Before pulling the engine + box out together - disconnect the slave cylinder on the n/s of the bell housing (2x 13mm nuts)

Also, loom wise - just unplug the ECU and push the loom into the engine bay through the fire wall, disconnect the power leads and hey presto - the loom can come out connected to the engine still.

Neil.
Image

"I F**KING LOVE YOU GUMBO"
wildeian
E30 Zone Regular
E30 Zone Regular
Posts: 851
Joined: Thu Mar 09, 2006 11:00 pm
Location: Colchester, Essex

Post Wed Dec 13, 2006 8:54 pm

If you jack the back of the car up as far as you can, the engine and 'box will come out nicely!! :D

(and you won't need to take the front of the car apart!!)
jmc330i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6621
Joined: Mon Jan 10, 2005 11:00 pm
Location: Somerset

Post Wed Dec 13, 2006 10:51 pm

You using an engine crane? If so, get one of these....
Image

Cost about 30 pounds and makes the job so easy. I removed/replaced the M20 and gearbox in one go using mine, no need to jack the back of the car up etc, just pops out the top 8)
James
'91 325i Sport
'93 318i touring 16v
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Wed Dec 13, 2006 11:24 pm

Nelly wrote: Before pulling the engine + box out together - disconnect the slave cylinder on the n/s of the bell housing (2x 13mm nuts)
.
You've done that as well then!
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Wed Dec 13, 2006 11:27 pm

jmc330i wrote:You using an engine crane? If so, get one of these....
Image
Very useful tool. I bought one recently after swearing for years that I'd never take an engine out again without one. Finally bought it, and have used it twice so far.
Could do with a couple of proper bearings though!
jmc330i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6621
Joined: Mon Jan 10, 2005 11:00 pm
Location: Somerset

Post Wed Dec 13, 2006 11:33 pm

Brianmoooore wrote: Could do with a couple of proper bearings though!
Yeah, thats my only complaint with it. There are more expensive ones with bearings etc, but they were nearer 100 pounds and held less weight IIRC.
I just greased the thread on mine and it worked fine.
James
'91 325i Sport
'93 318i touring 16v
SPADGE
Married to the E30 Zone
Married to the E30 Zone
Posts: 7373
Joined: Wed Aug 09, 2006 11:00 pm
Location: Milton Keynes, Bucks

Post Wed Dec 13, 2006 11:41 pm

jmc330i wrote:You using an engine crane? If so, get one of these....
Image

Cost about 30 pounds and makes the job so easy. I removed/replaced the M20 and gearbox in one go using mine, no need to jack the back of the car up etc, just pops out the top 8)
Where from please?
I'm forever pulling engines in and out and keep saying i must get one of these!

oldroydsr4 - Don't even bother trying to seperate engine and box in situ its far too much hassle and much easier to remove them both together as has been said already!
Engine conversions, Auto to manual conversions, parts, servicing etc etc... For anything e30 call 07718 901737
jmc330i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6621
Joined: Mon Jan 10, 2005 11:00 pm
Location: Somerset

Post Thu Dec 14, 2006 12:09 am

SPADGE wrote:
jmc330i wrote:You using an engine crane? If so, get one of these....
Image

Cost about 30 pounds and makes the job so easy. I removed/replaced the M20 and gearbox in one go using mine, no need to jack the back of the car up etc, just pops out the top 8)
Where from please?
I'm forever pulling engines in and out and keep saying i must get one of these!
First google listing....
http://www.justoffbase.co.uk/Load-Level ... tegory=134

I got mine from a local tool shop for 32 quid, about the same price as the above link once you add on postage.
Have a search through a couple of the online tool places, you might get one cheaper but watch out for the load rating. The draper one is 500kg, but Ive seen some with less that cost a few quid less - Id rather spend a bit more and get one thats definitely up to the job.
James
'91 325i Sport
'93 318i touring 16v
wildeian
E30 Zone Regular
E30 Zone Regular
Posts: 851
Joined: Thu Mar 09, 2006 11:00 pm
Location: Colchester, Essex

Post Thu Dec 14, 2006 12:14 am

SPADGE
Married to the E30 Zone
Married to the E30 Zone
Posts: 7373
Joined: Wed Aug 09, 2006 11:00 pm
Location: Milton Keynes, Bucks

Post Thu Dec 14, 2006 12:48 am

Thanks guys :)
Engine conversions, Auto to manual conversions, parts, servicing etc etc... For anything e30 call 07718 901737
oldroydsr4
E30 Zone Squatter
E30 Zone Squatter
Posts: 1579
Joined: Tue Oct 25, 2005 11:00 pm
Location: Warwick

Post Thu Dec 14, 2006 11:14 am

Thanks lads, if only i had known about the loom before would have saved ages.
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Thu Dec 14, 2006 3:14 pm

Nelly and Brian,That makes three of us!!!I was able to bend the pipe back,though.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Thu Dec 14, 2006 9:22 pm

daimlerman wrote:Nelly and Brian,That makes three of us!!!I was able to bend the pipe back,though.
Speedo sender wires don't last long either when you suspend the diff by them!
Nelly
Gumbo
Gumbo
Posts: 4239
Joined: Mon Jan 10, 2005 11:00 pm
Location: Divorce Central

Post Thu Dec 14, 2006 11:43 pm

^^^ ROFL - talk about learn from your mistakes lol, yes i'm guilty of bending the 5hit out of the slave cylinder pipe and trying to extend the speed sensor wires with the diff along with snapping the occasional fan blade on the front panel - snapping the reverse sensor wires and trying to manipulate the oil cooler pipes into positions they where never designed for. :?

Years on - i know better now lol

Neil.
Image

"I F**KING LOVE YOU GUMBO"
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Fri Dec 15, 2006 7:25 am

Thanks for the tip ref the speedo sensor,when I come to swap my diff I will look out for it.When I was 18 or so I knew everything,seems like I have forgot alot as I grew up!!
wildeian
E30 Zone Regular
E30 Zone Regular
Posts: 851
Joined: Thu Mar 09, 2006 11:00 pm
Location: Colchester, Essex

Post Fri Dec 15, 2006 12:53 pm

seems like I have forgot alot as I grew up!!
The definition of an an expert:

Somebody who knows more and more about less, until they eventually know everything about nothing!! :D
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Fri Dec 15, 2006 11:02 pm

Cheeky young bounder