Almost there

[mattG]

so how would it go to j10 m25 with a 2.5 m20 in the boot

[SPADGE]

nice!

thats what we like.

Cheers mate
You must recognise my filter
Have you started your project yet or are you still wafting around in the e34?

[gareth]

if you have a local breakers, i found a rectangular vitara washer bottle is easy to fit to the (now lonely and empty looking) afm bracket with a simple ali plate bracket. i drilled a hole in the side and fitted the E30 level sender too

[DRIFTBOY]

When I eventually get mine on the rollers I want to try the K&N cone that came with my donor car and a standard E32 air box and do a back to back comparison. Just to see for myself and settle the age old debate!

As for bonnet venting, there is always this quick, easy and free method!

[SPADGE]

so how would it go to j10 m25 with a 2.5 m20 in the boot

Keep taking the pills mate or try www.manwithavanespecialyforcartingshonkyoldengines.com

[fugazi33]

spadge, so it goes well

I was pleasantly surprised to be honest mate yes
It didn't scare me or even come close but the term 'mildly moist' would be appropriate

I think the grin on our faces said it all it goes VERY well, considering it was only a shakedown

[mattG]

so how would it go to j10 m25 with a 2.5 m20 in the boot

Keep taking the pills mate or try www.manwithavanespecialyforcartingshonkyoldengines.com

thatys you init cossie powered

[SPADGE]

When I eventually get mine on the rollers I want to try the K&N cone that came with my donor car and a standard E32 air box and do a back to back comparison. Just to see for myself and settle the age old debate!

As for bonnet venting, there is always this quick, easy and free method!

You've left your bonnet open mate

Not very stealthy or pretty is it i think i would rather drill the big feck off hole to be honest The rst boys used to do stuff like that to gain 'imaginary horses' lol

[DRIFTBOY]

I'm not fussed about stealth or pretty.
If it has any effect at all, it's a free mod!

And a 1 minute job to loosen 4 bolts and put it back!

[SPADGE]

I'm not fussed about stealth or pretty.
If it has any effect at all, it's a free mod!

And a 1 minute job to loosen 4 bolts and put it back!

Get it done then

Its a horses for courses thing then mate.
If performance was 'everything' then i would have a blower on there by now (or put a YB in there )but mine isn't at this present time an all out 'wring its neck' car its a comfortable, reasonably quick, stock looking E30 which is what i wanted
I think i may run a duct from the exhaust manifold to the filter just to see what reaction that gets lol

[DRIFTBOY]

I'm not fussed about stealth or pretty.
If it has any effect at all, it's a free mod!

And a 1 minute job to loosen 4 bolts and put it back!

Get it done then

I did.

It was just a suggestion.
I'll keep it to myself next time.

[fugazi33]

I'm not fussed about stealth or pretty.
If it has any effect at all, it's a free mod!

And a 1 minute job to loosen 4 bolts and put it back!

Get it done then

Its a horses for courses thing then mate.
If performance was 'everything' then i would have a blower on there by now (or put a YB in there )but mine isn't at this present time an all out 'wring its neck' car its a comfortable, reasonably quick, stock looking E30 which is what i wanted
I think i may run a duct from the exhaust manifold to the filter just to see what reaction that gets lol

LOL you want to have the filter sticking out the bonnet on one side & the exhaust sticking up out the other side tractor stylee, mind you me being from Norfolk I'd really loike it boi

[SPADGE]

I'm not fussed about stealth or pretty.
If it has any effect at all, it's a free mod!

And a 1 minute job to loosen 4 bolts and put it back!

Get it done then

I did.

It was just a suggestion.
I'll keep it to myself next time.

I was kidding with you mate hence the smileys so take a chill pill please

[Skip]

Looking good Spadge, nice to see it up and running after seeing it all in bits at yours!

[SPADGE]

Looking good Spadge, nice to see it up and running after seeing it all in bits at yours!

Cheers mate
I'm just moving onto the blue one now

[mattG]

Get it done then

I did.

It was just a suggestion.
I'll keep it to myself next time.

I was kidding with you mate hence the smileys so take a chill pill please

i'll think you'll find spadge is a bit unhinged

[Andy335Touring]

Cool, nice one mate

For the washer bottle i plumbed/wired the rear touring washer for the front screen, it opperates off the stalk like normal

[SPADGE]

Cool, nice one mate

For the washer bottle i plumbed/wired the rear touring washer for the front screen, it opperates off the stalk like normal

Cheers Andy is there a bit of 'lag' between pressing the button and the screen actually getting wet though
I'm going to go have a play around with the original one to see if i can get it to fit with the airbox as being a lux it was too poverty to have the headlight washers and the bottle is smaller

[Andy335Touring]

yeah bit of a delay, i could improve it with some one way valves but i aint that bothered

[SPADGE]

yeah bit of a delay, i could improve it with some one way valves but i aint that bothered

I doubt i would be bothered either mate i was just curious

[mybmw6]

Very nice, no one would ever know... Unless you wanted them to.

[SPADGE]

Very nice, no one would ever know... Unless you wanted them to.

Thanks mate
I'll get some decent pictures up one day

[oze30]

Yeah.. Hurry up with the pics!