2 LITRE 731 HEADS & 323 heads

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
exup
Boost Junkie
Posts: 351
Joined: Tue Mar 08, 2005 11:00 pm

Post Tue Dec 05, 2006 8:53 pm

Are all 2 litre heads ( and 323i heads too ) the same?

, ie would a 1985 2litre l head be the same in ie port sizes as the later 731 heads or are they smaller and round like the 200 / ETA heads ?
cheers
pacerpete
E30 Zone Team Member
E30 Zone Team Member
Posts: 18165
Joined: Sun Jan 23, 2005 11:00 pm
Location: Iver heath. South bucks.

Post Wed Dec 06, 2006 12:09 am

All e30 320i and 323i heads are exactly the same,both use a 731 casting.
User avatar
M-technik3
E30 Zone Newbie
E30 Zone Newbie
Posts: 104
Joined: Sun Apr 23, 2006 11:00 pm

Post Wed Dec 06, 2006 1:47 am

And we in the US wish these head were more common and available here.
User avatar
exup
Boost Junkie
Posts: 351
Joined: Tue Mar 08, 2005 11:00 pm

Post Wed Dec 06, 2006 9:40 am

pacerpete wrote:All e30 320i and 323i heads are exactly the same,both use a 731 casting.
Many thanks for info,
i had head that the early heads &323 had smaller ports , if there all the same should help in my search for one
u can nt beat the zone 4 info :x
cheers
Templ8e30
E30 Zone Addict
E30 Zone Addict
Posts: 2801
Joined: Mon Jan 10, 2005 11:00 pm
Location: Ashton-under-Lyne, Lancashire

Post Wed Dec 06, 2006 2:54 pm

The E21 had the 200 casting like the eta's with small ports but E30's were all 731's.

Cheers,

Iain T
Image
2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !
User avatar
Estoril-5
E30 Zone Newbie
E30 Zone Newbie
Posts: 216
Joined: Sun Dec 11, 2005 11:00 pm
Location: Birmingham

Post Wed Dec 06, 2006 2:56 pm

whats a 731 when its at home?
Image
User avatar
Gunni
E30 Zone Addict
E30 Zone Addict
Posts: 2115
Joined: Tue Jan 11, 2005 11:00 pm
Location: Oxford

Post Wed Dec 06, 2006 3:21 pm

a 320i l-jet or motronic
With great challenges comes great engineering.

Gunni
@ 2012 VEMS group buy !!
maxfield
Old Skooler
Old Skooler
Posts: 15185
Joined: Sat Nov 26, 2005 11:00 pm
Location: Mansfield

Post Wed Dec 06, 2006 3:23 pm

Estoril-5 wrote:whats a 731 when its at home?
320/323 head

885 is 325 head
Image
dazleeds
old skool raver
old skool raver
Posts: 12883
Joined: Fri Apr 01, 2005 11:00 pm
Location: Empire Building @

Post Wed Dec 06, 2006 3:24 pm

exup

havent managed to find the cam yet as my sheds like a bombsite but it is in there somewhere

found head so thats not a prob

Daz
www.oldskoolfantasy.co.uk
in the shit,the one to blame,yeh its all my fault ;)
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Wed Dec 06, 2006 4:12 pm

M-technik3 wrote:And we in the US wish these head were more common and available here.
Well, find out how much it would cost to ship one over. There are thousands of them over here and they would transform a 325e. The good thing is, the 731 head has the same chamber volume as the Eta head so you'd keep your existing compression - which on the US Etas isn't that great (9:1?).
User avatar
exup
Boost Junkie
Posts: 351
Joined: Tue Mar 08, 2005 11:00 pm

Post Wed Dec 06, 2006 6:49 pm

Templ8e30 wrote:The E21 had the 200 casting like the eta's with small ports but E30's were all 731's.

Cheers,

Ian T
Thanks Ian , i see your now running a 731 head not the PORTED OUT ETA one, may i ask why , as i ve got 4 good 200 heads and was thinking of porting / drill out the cam bearing etc as u did , i thought u got 209 bhp out the ETA head on a std CAM ??
Regards F
Templ8e30
E30 Zone Addict
E30 Zone Addict
Posts: 2801
Joined: Mon Jan 10, 2005 11:00 pm
Location: Ashton-under-Lyne, Lancashire

Post Wed Dec 06, 2006 7:29 pm

exup wrote:
Templ8e30 wrote:The E21 had the 200 casting like the eta's with small ports but E30's were all 731's.

Cheers,

Ian T
Thanks Ian , i see your now running a 731 head not the PORTED OUT ETA one, may i ask why , as i ve got 4 good 200 heads and was thinking of porting / drill out the cam bearing etc as u did , i thought u got 209 bhp out the ETA head on a std CAM ??
Regards F
I am indeed, the eta head had original size valves and wasn't particularly revvy, felt a bit restricted at full chat. I got a 731 head to replace it as there's less porting work needed so I could fit larger valves.

I've also fitted a 273 degree cat cam, she now revs like a 325i with a nice powerband that 'kicks' in at 3500rpm.

No dyno results as yet, megasquirt will be going on shortly to sort the fuelling out properly. She's seriously quick now winkeye

Cheers,

Iain T
Image
2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !
User avatar
exup
Boost Junkie
Posts: 351
Joined: Tue Mar 08, 2005 11:00 pm

Post Wed Dec 06, 2006 7:44 pm

I followed your lead ,
but used a ported out a 731 head with 325 valves ,new guides etc , was going to fit a new 325 cam , its all waiting to be bolted up , over x mass , assume the 325 cam had a wide flat torque curve but did nt wake up enought ?
,
i ve already done one on a 731 heads with std 371 valves ported out/325CAM ETC etc but put it back in to mY old 525E , But ant COULD NOT CHIP IT CAUSE ITS A SWITCHABLE AUTO on a 2 row / 24 pin ECU , :cry: ,
HOW MUCH WAS THE cat cam ?
CHEERS
,
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Wed Dec 06, 2006 10:35 pm

My old man chipped my 525e auto, a 1987E Lux with the non-switchable auto. It raised the rev limit to 5000, gave it a huge increase in fuelling and timing and transformed it. Etas are quite torquey but conversely a bit flat as well. This one went well afterwards but the cam is the limiting factor.
To be honest I don't see the point on fitting 325i valves to a 731 head. Unless you're using some ghastly US spec Eta, why not just use a 325i head? They're £50-100 in any scrapyard and have the bigger valves and slightly bigger inlet ports as standard. Despite what many 'expurts' say it doesn't adversely affect the compression ratio either.
Templ8e30
E30 Zone Addict
E30 Zone Addict
Posts: 2801
Joined: Mon Jan 10, 2005 11:00 pm
Location: Ashton-under-Lyne, Lancashire

Post Thu Dec 07, 2006 2:53 pm

The Cat cam was about £250 from here http://www.catcams.co.uk/

Andy, I used the 731 head because the combustion chambers are correct for the Eta pistons and I'm a bit anal about doing things the 'correct' way :roll:

Cheers,

Iain T
Image
2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !