My heater matrix is leaking. I can't really afford to take it to a garage just before christmas and may have a go at replacing it myself. I've sourced a cheap working 2nd hand one from Emrays in Norfolk. How difficult/fiddly is it to do and any hints or tips?
Thanks
Heater Matrix
Moderator: martauto
-
gazza
- E30 Zone Camper

- Posts: 1266
- Joined: Tue Feb 08, 2005 11:00 pm
- Location: north london/herts
its quite fidley but before it gets that far check its not the o ring seals on the control unit on the top that are not leaking they run down the matrix and give the impression that the matrix is leaking when in fact it is the seals
-
J_Mac
- E30 Zone Regular

- Posts: 401
- Joined: Thu Nov 02, 2006 11:00 pm
can i ask how you know, because i think mine maybe. drivers footwell is wet and did the floor lining because i thought there was a hole but it wasn't that bad. thinking of other options now ..

-
gazza
- E30 Zone Camper

- Posts: 1266
- Joined: Tue Feb 08, 2005 11:00 pm
- Location: north london/herts
you get a build up of pink or blue coloured dry powdery gunk around the seals (dependant on the colour of your anti freeze)and water leaks if you change the matrix the only way it will come out is by moving the servo/master cylinder bolts all the glove box bits and the 2 pipes are a pig (hard to get at the nuts) do a search on heater matrix there are some good pics to show you danthe posted some good pics a couple of weeks ago
also i recall brianmoore saying the later heater matrix do not corrode or leak its 99% the seals
also i recall brianmoore saying the later heater matrix do not corrode or leak its 99% the seals
-
magnumlove
- E30 Zone Newbie

- Posts: 61
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Ipswich
It was using water but couldn't work out where from so I took it to a garage who had a look and said that the matrix had a slight leak.J_Mac wrote:can i ask how you know, because i think mine maybe. drivers footwell is wet and did the floor lining because i thought there was a hole but it wasn't that bad. thinking of other options now ..
Thanks for the replys. Will check seals
-
magnumlove
- E30 Zone Newbie

- Posts: 61
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Ipswich
So if it is the seals, are these just as difficult to get at?gazza wrote:you get a build up of pink or blue coloured dry powdery gunk around the seals (dependant on the colour of your anti freeze)and water leaks if you change the matrix the only way it will come out is by moving the servo/master cylinder bolts all the glove box bits and the 2 pipes are a pig (hard to get at the nuts) do a search on heater matrix there are some good pics to show you danthe posted some good pics a couple of weeks ago
also i recall brianmoore saying the later heater matrix do not corrode or leak its 99% the seals
