Ok folks, guess the mystery part time........
I just got my complete head gasket kit, and there are a few mystery items in it.......
90% of the items i know, but there are a few mystery bits....mainly rubber O rings.......
Any ideas ?
pics to follow.....
guess the mystery part
Moderator: martauto
-
kam-325i
- E30 Zone Team Member

- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
Pete don't care about colour, He would shag a rainbow if he could find the end of it....


-
old_skool
- E30 Zone Team Member

- Posts: 3405
- Joined: Fri Sep 01, 2006 11:00 pm
- Location: Glossersure
Probably the same as the Elring head kit that I used. I had no idea what the O rings were for either.
-
thebigone
- E30 Zone Regular

- Posts: 294
- Joined: Sat Jul 29, 2006 11:00 pm
- Location: Newhaven (south coast)
how about the rings that fit on the breather pipe under the inlet manifold ???
-
kam-325i
- E30 Zone Team Member

- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
Heres the pic

items i know, rocker shaft plug things X 4, New valve oil seals X12, Cam bearing seal (the one behind the sprocket), and possible thermostat seal ring thingy (largest and thickest O ring).
The 16 small rubber O rings, the 4 copper and 2 aluminium wahsers, the large thin O ring, the other 3 O rings and the really tiny O ring below the Ali washers.....i have no idea what they are.....

items i know, rocker shaft plug things X 4, New valve oil seals X12, Cam bearing seal (the one behind the sprocket), and possible thermostat seal ring thingy (largest and thickest O ring).
The 16 small rubber O rings, the 4 copper and 2 aluminium wahsers, the large thin O ring, the other 3 O rings and the really tiny O ring below the Ali washers.....i have no idea what they are.....
Pete don't care about colour, He would shag a rainbow if he could find the end of it....


-
thebigone
- E30 Zone Regular

- Posts: 294
- Joined: Sat Jul 29, 2006 11:00 pm
- Location: Newhaven (south coast)
injector "O" ring and fule pump and the bottom two on the right as stated I think an't got a scoobys about the rest.
-
kam-325i
- E30 Zone Team Member

- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
Which one's ? the 16 off.......thebigone wrote:injector "O" ring
Pete don't care about colour, He would shag a rainbow if he could find the end of it....


-
blingsta
- Boost Junkie
- Posts: 2930
- Joined: Fri Jan 27, 2006 11:00 pm
- Location: Enfield
2 on the bottom right is the breather tube from inlet manifold to block
-
kam-325i
- E30 Zone Team Member

- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
thought they might be for the breather tube......
Any joy with the washers you lot.....................and what needs 16 little O rings on a M20 ????
Any joy with the washers you lot.....................and what needs 16 little O rings on a M20 ????
Pete don't care about colour, He would shag a rainbow if he could find the end of it....


-
thebigone
- E30 Zone Regular

- Posts: 294
- Joined: Sat Jul 29, 2006 11:00 pm
- Location: Newhaven (south coast)
well that's what I would go for with a few left over. Copper washers, are they not for the fuel line ??
-
kam-325i
- E30 Zone Team Member

- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
to thick for the injectors.........
Washers look like they are for banjo connectors.....but there ar'nt any on the head anywhere....
Washers look like they are for banjo connectors.....but there ar'nt any on the head anywhere....
Pete don't care about colour, He would shag a rainbow if he could find the end of it....


-
DRIFTBOY
- E30 Zone Addict

- Posts: 3131
- Joined: Mon May 22, 2006 11:00 pm
- Location: Kent
Are some of the metal washers for temperature sensors and oil switch?
I had a load of wierd stuff left over in my M30 gasket sets - and I replaced everything I possibly could.
Could they be for different model years and / or foreign models with emission control equipment or something ?
I had a load of wierd stuff left over in my M30 gasket sets - and I replaced everything I possibly could.
Could they be for different model years and / or foreign models with emission control equipment or something ?
Jeremy Clarkson wrote:...but it drives the front wheels. Theee wrooong wheels!
da4x4turbo wrote:I raced a vivaro on the motorway once in a 318is.... and lost!!!
-
Templ8e30
- E30 Zone Addict

- Posts: 2801
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Ashton-under-Lyne, Lancashire
The 16 o-rings are deffo for the injectors, should only be 13 though (1 for the FPR).
The alloy metal washers are for block drain plug/sump plug, copper washers for temp sensors in the thermostat housing. Some thermostat housings have 2 extra holes that are plugged hence there are 4 copper washers.
Never used that thick o-ring
Cheers,
Iain T
The alloy metal washers are for block drain plug/sump plug, copper washers for temp sensors in the thermostat housing. Some thermostat housings have 2 extra holes that are plugged hence there are 4 copper washers.
Never used that thick o-ring
Cheers,
Iain T

2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !
