guess the mystery part

Need technical Q/A then you're in the right place

Moderator: martauto

kam-325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 4851
Joined: Tue Sep 27, 2005 11:00 pm
Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!

Post Wed Nov 29, 2006 10:02 pm

Ok folks, guess the mystery part time........

I just got my complete head gasket kit, and there are a few mystery items in it.......

90% of the items i know, but there are a few mystery bits....mainly rubber O rings.......

Any ideas ?

pics to follow.....
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
Image
old_skool
E30 Zone Team Member
E30 Zone Team Member
Posts: 3405
Joined: Fri Sep 01, 2006 11:00 pm
Location: Glossersure

Post Wed Nov 29, 2006 10:07 pm

Probably the same as the Elring head kit that I used. I had no idea what the O rings were for either.
User avatar
thebigone
E30 Zone Regular
E30 Zone Regular
Posts: 294
Joined: Sat Jul 29, 2006 11:00 pm
Location: Newhaven (south coast)

Post Wed Nov 29, 2006 10:19 pm

how about the rings that fit on the breather pipe under the inlet manifold ???
kam-325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 4851
Joined: Tue Sep 27, 2005 11:00 pm
Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!

Post Wed Nov 29, 2006 10:27 pm

Heres the pic

Image

items i know, rocker shaft plug things X 4, New valve oil seals X12, Cam bearing seal (the one behind the sprocket), and possible thermostat seal ring thingy (largest and thickest O ring).

The 16 small rubber O rings, the 4 copper and 2 aluminium wahsers, the large thin O ring, the other 3 O rings and the really tiny O ring below the Ali washers.....i have no idea what they are.....
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
Image
User avatar
thebigone
E30 Zone Regular
E30 Zone Regular
Posts: 294
Joined: Sat Jul 29, 2006 11:00 pm
Location: Newhaven (south coast)

Post Wed Nov 29, 2006 10:43 pm

injector "O" ring and fule pump and the bottom two on the right as stated I think an't got a scoobys about the rest.
kam-325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 4851
Joined: Tue Sep 27, 2005 11:00 pm
Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!

Post Wed Nov 29, 2006 10:56 pm

thebigone wrote:injector "O" ring
Which one's ? the 16 off.......
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
Image
User avatar
blingsta
Boost Junkie
Posts: 2930
Joined: Fri Jan 27, 2006 11:00 pm
Location: Enfield

Post Wed Nov 29, 2006 11:09 pm

2 on the bottom right is the breather tube from inlet manifold to block
kam-325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 4851
Joined: Tue Sep 27, 2005 11:00 pm
Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!

Post Wed Nov 29, 2006 11:14 pm

thought they might be for the breather tube......

Any joy with the washers you lot.....................and what needs 16 little O rings on a M20 ????
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
Image
User avatar
thebigone
E30 Zone Regular
E30 Zone Regular
Posts: 294
Joined: Sat Jul 29, 2006 11:00 pm
Location: Newhaven (south coast)

Post Wed Nov 29, 2006 11:45 pm

well that's what I would go for with a few left over. Copper washers, are they not for the fuel line ??
kam-325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 4851
Joined: Tue Sep 27, 2005 11:00 pm
Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!

Post Wed Nov 29, 2006 11:52 pm

to thick for the injectors.........

Washers look like they are for banjo connectors.....but there ar'nt any on the head anywhere....
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
Image
DRIFTBOY
E30 Zone Addict
E30 Zone Addict
Posts: 3131
Joined: Mon May 22, 2006 11:00 pm
Location: Kent

Post Thu Nov 30, 2006 12:08 am

Are some of the metal washers for temperature sensors and oil switch?

I had a load of wierd stuff left over in my M30 gasket sets - and I replaced everything I possibly could.
Could they be for different model years and / or foreign models with emission control equipment or something ? :?
Jeremy Clarkson wrote:...but it drives the front wheels. Theee wrooong wheels!
da4x4turbo wrote:I raced a vivaro on the motorway once in a 318is.... and lost!!!
Templ8e30
E30 Zone Addict
E30 Zone Addict
Posts: 2801
Joined: Mon Jan 10, 2005 11:00 pm
Location: Ashton-under-Lyne, Lancashire

Post Thu Nov 30, 2006 12:40 am

The 16 o-rings are deffo for the injectors, should only be 13 though (1 for the FPR).

The alloy metal washers are for block drain plug/sump plug, copper washers for temp sensors in the thermostat housing. Some thermostat housings have 2 extra holes that are plugged hence there are 4 copper washers.

Never used that thick o-ring 8O

Cheers,

Iain T
Image
2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !