for anyone thinking of turbo ing....
Moderator: martauto
-
fuzzy
- He who sleeps with "Gingers"
- Posts: 14351
- Joined: Sat Jun 04, 2005 11:00 pm
- Location: melbourne Australia
DO IT! ive just taken mine for a blast after 3 weeks of the road waiting for a new alternator and id forgotten just how fast it is.the power when you put the foot down from 30 in 2nd when the boost comes in is amazing
stuff the christmas presents,im going to buy a set of bigger injectors so i can whack the boost up to 24psi and around 330 bhp just in time for some holiday fun

-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
What intercooler are you running mate?fuzzy wrote:DO IT! ive just taken mine for a blast after 3 weeks of the road waiting for a new alternator and id forgotten just how fast it is.the power when you put the foot down from 30 in 2nd when the boost comes in is amazingstuff the christmas presents,im going to buy a set of bigger injectors so i can whack the boost up to 24psi and around 330 bhp just in time for some holiday fun
![]()
As well as the dark green 803's you will need a 3 bar map sensor and a chip to suit!
-
march109
- Engaged to the E30 Zone

- Posts: 6632
- Joined: Sun Aug 20, 2006 11:00 pm
- Location: Bournemouth
Whats it cost for a basic turbo setup? God I'm tempted.
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
His isn't a basic turbo set-up mate! Well actually it is for a Cosworth lolmarch109 wrote:Whats it cost for a basic turbo setup? God I'm tempted.
-
march109
- Engaged to the E30 Zone

- Posts: 6632
- Joined: Sun Aug 20, 2006 11:00 pm
- Location: Bournemouth
ok suppose. Don't fancy the cosworth route to boost lovlyness tho.
325i Tech 1 Touring, breaking.
2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
I have been thinking about it for a future mod

Considering Selling the Cabby, looks like its gonna go
-
fuzzy
- He who sleeps with "Gingers"
- Posts: 14351
- Joined: Sat Jun 04, 2005 11:00 pm
- Location: melbourne Australia
its all being taken care of mate,just under £600 for it all fitted then a bigger custom intercooler to be fitted in the space between the rad and the grillSPADGE wrote: As well as the dark green 803's you will need a 3 bar map sensor and a chip to suit!
-
fuzzy
- He who sleeps with "Gingers"
- Posts: 14351
- Joined: Sat Jun 04, 2005 11:00 pm
- Location: melbourne Australia
im just at the beginning of the tried and tested cosworth tuning path.its going to be a long and bumpy rideSPADGE wrote:His isn't a basic turbo set-up mate! Well actually it is for a Cosworth lolmarch109 wrote:Whats it cost for a basic turbo setup? God I'm tempted.
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
Tell me about it mate but after 8 years of modifying all things Cosworth its safe to say i know a thing or twofuzzy wrote:im just at the beginning of the tried and tested cosworth tuning path.its going to be a long and bumpy rideSPADGE wrote:His isn't a basic turbo set-up mate! Well actually it is for a Cosworth lolmarch109 wrote:Whats it cost for a basic turbo setup? God I'm tempted.
I hope your 600 quid isn't just for the injectors , 3 bar and chip mate as i can get you those for half that and fitting is a doddle
-
fuzzy
- He who sleeps with "Gingers"
- Posts: 14351
- Joined: Sat Jun 04, 2005 11:00 pm
- Location: melbourne Australia
tell me more.....does it need set up after these stage 3 bits are fitted or is it basically 'plug and play'?SPADGE wrote: Tell me about it mate but after 8 years of modifying all things Cosworth its safe to say i know a thing or two![]()
I hope your 600 quid isn't just for the injectors , 3 bar and chip mate as i can get you those for half that and fitting is a doddle
-
E30cosworth
- E30 Zone Newbie

- Posts: 44
- Joined: Thu Nov 23, 2006 11:00 pm
- Location: Cumbria
If you wait a week or two STU@MSD normally does a Xmas sale 25% off all prices i got 4x803's, 3 Bar Map, L8 Closed loop chip, last yr for my Saph fitted it all myself took about 1/2hr then all you need to do is get it checked and setupfuzzy wrote:DO IT! ive just taken mine for a blast after 3 weeks of the road waiting for a new alternator and id forgotten just how fast it is.the power when you put the foot down from 30 in 2nd when the boost comes in is amazingstuff the christmas presents,im going to buy a set of bigger injectors so i can whack the boost up to 24psi and around 330 bhp just in time for some holiday fun
![]()
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
Pretty much mate although someone with Cossie experience should check your fuelling etc...!fuzzy wrote:tell me more.....does it need set up after these stage 3 bits are fitted or is it basically 'plug and play'?SPADGE wrote: Tell me about it mate but after 8 years of modifying all things Cosworth its safe to say i know a thing or two![]()
I hope your 600 quid isn't just for the injectors , 3 bar and chip mate as i can get you those for half that and fitting is a doddle
Old knobby bollox above has a point Stu normally does his chips a bit cheaper around now
-
fuzzy
- He who sleeps with "Gingers"
- Posts: 14351
- Joined: Sat Jun 04, 2005 11:00 pm
- Location: melbourne Australia
what do you think is a more realistic price for the 803's,3 bar and chip,supply only? ive only got a level 6 ecu?ill then get it checked over by someone more experienced than me. the more i can save here the better obviously as my intercooler is going to cost me a few hundred quid to have made and then maybe i might have enough left to get my kids some christmas presents 
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
I can get 803's for about 150fuzzy wrote:what do you think is a more realistic price for the 803's,3 bar and chip,supply only? ive only got a level 6 ecu?ill then get it checked over by someone more experienced than me. the more i can save here the better obviously as my intercooler is going to cost me a few hundred quid to have made and then maybe i might have enough left to get my kids some christmas presents
3 bar 60
Chip around 75/100
I also know a good firm that will make you an i/c for around 250/300
-
E30cosworth
- E30 Zone Newbie

- Posts: 44
- Joined: Thu Nov 23, 2006 11:00 pm
- Location: Cumbria
Alright mate this might be an option for you if you wanna save a few penny perfect intercooler for yafuzzy wrote:what do you think is a more realistic price for the 803's,3 bar and chip,supply only? ive only got a level 6 ecu?ill then get it checked over by someone more experienced than me. the more i can save here the better obviously as my intercooler is going to cost me a few hundred quid to have made and then maybe i might have enough left to get my kids some christmas presents
If you can afford it go for a closed loop chip and fit a lambda sensor it will return you 30+mpg on a motorway run
it's all yours for £100+ postage
-
fuzzy
- He who sleeps with "Gingers"
- Posts: 14351
- Joined: Sat Jun 04, 2005 11:00 pm
- Location: melbourne Australia
interesting....what the dimensions of that intercooler?have you had it fitted to your e30 cosworth and if so where and how?E30cosworth wrote: Alright mate this might be an option for you if you wanna save a few penny perfect intercooler for ya
it's all yours for £100+ postage
-
E30cosworth
- E30 Zone Newbie

- Posts: 44
- Joined: Thu Nov 23, 2006 11:00 pm
- Location: Cumbria
Dimensions are it has 3" outlets
The intercooler measures Width=60cm, Height=46cm, Depth=4.5cm
haven't had it fitted to my E30 but mine currently runs a Pace RS500 intercooler, Pace Alloy Rad & Pace Turbo Pre-rad all Ford cosworth fitment i do believe he cut the chassis a tad to get them in
just have alook on here http://www.e30cosworth.co.uk
The intercooler measures Width=60cm, Height=46cm, Depth=4.5cm
haven't had it fitted to my E30 but mine currently runs a Pace RS500 intercooler, Pace Alloy Rad & Pace Turbo Pre-rad all Ford cosworth fitment i do believe he cut the chassis a tad to get them in
just have alook on here http://www.e30cosworth.co.uk
Last edited by E30cosworth on Wed Nov 29, 2006 9:59 pm, edited 1 time in total.
-
maxfield
- Old Skooler

- Posts: 15185
- Joined: Sat Nov 26, 2005 11:00 pm
- Location: Mansfield
Your kids chose your retirement homwefuzzy wrote: i might have enough left to get my kids some christmas presents

-
appletree
- E30 Zone Addict

- Posts: 3479
- Joined: Fri Jan 20, 2006 11:00 pm
- Location: Retford
Is'nt that the volvo 740/940 turbo intercooler? when i spoke to ant about doing a turbo set-up thats what he suggested. and what he used on his
apparently it the best volume to size cooler you can find with out goin mega bucks.
it fits infront of the normal e30 raditor and then the outlets point backwards either side of the raditor.
PPC 335 turbo is using the same one.
it fits infront of the normal e30 raditor and then the outlets point backwards either side of the raditor.
PPC 335 turbo is using the same one.

You should never underestimate the predictability of stupidity
M42 Supercharged 285bhp + M3 6speed box
-
Toby_Unna
- Boost Junkie
- Posts: 2183
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Sheffield
yes that's the intercooler I have. a good fit for an E30, and big enough for plenty of boostappletree wrote:Is'nt that the volvo 740/940 turbo intercooler?
PPC 335 turbo is using the same one.

