smoked headlights

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

mrLEE30
E30 Zone Team Member
E30 Zone Team Member
Posts: 6589
Joined: Tue Jan 18, 2005 11:00 pm
Location: Sweating buckets in Bahrain

Post Wed Nov 22, 2006 2:26 pm

it would not be too thick but it would be hard to cut. i used 2/3mm tinned steel sheet. easy to cut with tin snips

mrlee
Image
noney82
E30 Zone Camper
E30 Zone Camper
Posts: 1102
Joined: Thu Apr 27, 2006 11:00 pm
Location: manchester, stockport

Post Wed Nov 22, 2006 3:08 pm

i made my cross bits out of an old dvd plastic case much easyier to work with
and you dont use that light all the time so wont melt, would of used steel but im not good at making things by guess work found it hard enough with plastic, could do with a template being made up and a copy put up by some one so it could be printed of and used by others.
managed to get the angel bulb to fit after a bit a altering, cheers mrlee.
Richy325iTouring
E30 Zone Addict
E30 Zone Addict
Posts: 3490
Joined: Sun Jan 09, 2005 11:00 pm
Location: Newport SouthWales

Post Wed Nov 22, 2006 3:13 pm

might make a template up

i have some crosshairs here to do it
Image
noney82
E30 Zone Camper
E30 Zone Camper
Posts: 1102
Joined: Thu Apr 27, 2006 11:00 pm
Location: manchester, stockport

Post Wed Nov 22, 2006 3:15 pm

that would be mint idea cos i might re do mine then, how you hold them in place
Richy325iTouring
E30 Zone Addict
E30 Zone Addict
Posts: 3490
Joined: Sun Jan 09, 2005 11:00 pm
Location: Newport SouthWales

Post Wed Nov 22, 2006 3:17 pm

a hle through the refector
a tab bends over from the crosshair then
just seal it up
Image
noney82
E30 Zone Camper
E30 Zone Camper
Posts: 1102
Joined: Thu Apr 27, 2006 11:00 pm
Location: manchester, stockport

Post Wed Nov 22, 2006 3:19 pm

ahhhhhh right like a slice in the back
i defo need your template iv put a blob o sealer on them
bigkev
E30 Zone Regular
E30 Zone Regular
Posts: 612
Joined: Wed Jul 27, 2005 11:00 pm
Location: hibernating till summer

Post Wed Nov 22, 2006 5:21 pm

i used a small dab of epoxy resin at the very edge of the light where it meets the crosshairs and it works a treat and a bit easier
Image
noney82
E30 Zone Camper
E30 Zone Camper
Posts: 1102
Joined: Thu Apr 27, 2006 11:00 pm
Location: manchester, stockport

Post Wed Nov 22, 2006 5:25 pm

iv got a spare set lights might hope some1 puts a template up and do them ones properly, im not sure one what type of angel eye bulbs to get tho as i got some off theo on here so iv transfered them in to the smoked lights iv done, so what type buls i get?????
what is epoxy resin why it good iv heard loads ppl talk about it
User avatar
ste
Old Skooler
Old Skooler
Posts: 1173
Joined: Mon Feb 07, 2005 11:00 pm
Location: West Sussex

Post Thu Nov 23, 2006 12:03 pm

I took delivery of the last ever set of Geniune Smoked Hellas from Hella Germany last weekend. These are boxed, brand new with all connectors, new backings, holders etc. Hella have now stopped production and won't be making any more.

Serious offers considered via PM. Please don't PM me asking how much I want. Please try to write in legible sentences.

For a good enough offer I may part with them, otherwise I'll keep them as spares in case I damage one of mine.

Cheers! :)
karaokebykris
E30 Zone Newbie
E30 Zone Newbie
Posts: 217
Joined: Sun Jul 30, 2006 11:00 pm
Location: Staffs

Post Thu Nov 23, 2006 5:26 pm

In the process of smoking my bosch units at the moment, Lenses came off really easy with a heat gun, small blade screwdriver, lots of patience and a tiny amount of care! winkeye

No lights on my car now so i can't go out tonight and waiting for the paint to dry is killing me! :x
should have them all back together this evening and then let the sealant go of overnight and pop them in tomorrow morning! Will post some pics up when i have reassembled everything! Got a couple of spare sets knocking around so i will probably do them too when I have a spare evening. Was thinking about doing a template for people to print out myself but if it is already in hand....
:cool:
It is meaningless to ask; which is real, 'real' or imaginary? It is simply a matter of which is the more useful description

"One valuable thing to remember is that light tavels faster than sound, some people appear quite bright until they speak
dazleeds
old skool raver
old skool raver
Posts: 12883
Joined: Fri Apr 01, 2005 11:00 pm
Location: Empire Building @

Post Thu Nov 23, 2006 5:30 pm

i have the template in pdf
came from r3v if anyone needs it
www.oldskoolfantasy.co.uk
in the shit,the one to blame,yeh its all my fault ;)
karaokebykris
E30 Zone Newbie
E30 Zone Newbie
Posts: 217
Joined: Sun Jul 30, 2006 11:00 pm
Location: Staffs

Post Thu Nov 23, 2006 5:32 pm

I will have a copy of the template please Daz, save me fiddling around with bits of card again when i do the next set lol
It is meaningless to ask; which is real, 'real' or imaginary? It is simply a matter of which is the more useful description

"One valuable thing to remember is that light tavels faster than sound, some people appear quite bright until they speak
ed325i
E30 Zone Addict
E30 Zone Addict
Posts: 4146
Joined: Mon Jan 10, 2005 11:00 pm

Post Thu Nov 23, 2006 5:32 pm

dazleeds wrote:i have the template in pdf
came from r3v if anyone needs it
Can I have a template please.

I have go the lenses off ready winkeye
dazleeds
old skool raver
old skool raver
Posts: 12883
Joined: Fri Apr 01, 2005 11:00 pm
Location: Empire Building @

Post Thu Nov 23, 2006 5:34 pm

wont allow me to save pic from the pdf so cant post it up :roll:
Last edited by dazleeds on Thu Nov 23, 2006 6:49 pm, edited 1 time in total.
www.oldskoolfantasy.co.uk
in the shit,the one to blame,yeh its all my fault ;)
ed325i
E30 Zone Addict
E30 Zone Addict
Posts: 4146
Joined: Mon Jan 10, 2005 11:00 pm

Post Thu Nov 23, 2006 5:39 pm

dazleeds wrote:email me and ill send you it fella

daztech1@ntlworld.com

wont allow me to save pic from the pdf so cant post it up :roll:
E mail sent. :wink:
dazleeds
old skool raver
old skool raver
Posts: 12883
Joined: Fri Apr 01, 2005 11:00 pm
Location: Empire Building @

Post Thu Nov 23, 2006 5:42 pm

ed and kris sent 8)

feel free to make me 1 each if you wish :lol:
yes i really am that lazy :roll:
www.oldskoolfantasy.co.uk
in the shit,the one to blame,yeh its all my fault ;)
ed325i
E30 Zone Addict
E30 Zone Addict
Posts: 4146
Joined: Mon Jan 10, 2005 11:00 pm

Post Thu Nov 23, 2006 6:19 pm

I have had a play need a bit of work.

Image
noney82
E30 Zone Camper
E30 Zone Camper
Posts: 1102
Joined: Thu Apr 27, 2006 11:00 pm
Location: manchester, stockport

Post Thu Nov 23, 2006 7:03 pm

cheers daz its opened in adobe how do i change the print @ 300dpl
oguz327
Captain Armco
Captain Armco
Posts: 4174
Joined: Tue Oct 25, 2005 11:00 pm
Location: Hampshire

Post Thu Nov 23, 2006 9:37 pm

Cheers Daz,
just need to borrow a heat gun now, dont fance my chance's using the oven :mad:
oguz327
Captain Armco
Captain Armco
Posts: 4174
Joined: Tue Oct 25, 2005 11:00 pm
Location: Hampshire

Post Thu Nov 23, 2006 9:41 pm

Where are you fella's getting the sheet steel from?
spook
League two here we come !!!
Posts: 7583
Joined: Sat Aug 19, 2006 11:00 pm
Location: portsmouth

Post Thu Nov 23, 2006 9:57 pm

why didnt they do smoked lights on blue peter years ago :)
noney82
E30 Zone Camper
E30 Zone Camper
Posts: 1102
Joined: Thu Apr 27, 2006 11:00 pm
Location: manchester, stockport

Post Thu Nov 23, 2006 10:12 pm

how do i make the holes in the back of the light for the tabs to go through?
karaokebykris
E30 Zone Newbie
E30 Zone Newbie
Posts: 217
Joined: Sun Jul 30, 2006 11:00 pm
Location: Staffs

Post Thu Nov 23, 2006 10:23 pm

I used sheet steel chopped out of an old bootlid, Heat guns are cheap enough, I bought mine from screwfix only about £11 i think and well worth it! post some pics up tomorrow
It is meaningless to ask; which is real, 'real' or imaginary? It is simply a matter of which is the more useful description

"One valuable thing to remember is that light tavels faster than sound, some people appear quite bright until they speak
noney82
E30 Zone Camper
E30 Zone Camper
Posts: 1102
Joined: Thu Apr 27, 2006 11:00 pm
Location: manchester, stockport

Post Fri Nov 24, 2006 3:02 pm

noney82 wrote:how do i make the holes in the back of the light for the tabs to go through?
any1
oze30
E30 Zone Addict
E30 Zone Addict
Posts: 4133
Joined: Mon Oct 24, 2005 11:00 pm
Location: Sydney

Post Fri Nov 24, 2006 4:39 pm

dremel
noney82
E30 Zone Camper
E30 Zone Camper
Posts: 1102
Joined: Thu Apr 27, 2006 11:00 pm
Location: manchester, stockport

Post Fri Nov 24, 2006 4:44 pm

:cry: :cry: iv not got one any other way what about if i drill a small hole
noney82
E30 Zone Camper
E30 Zone Camper
Posts: 1102
Joined: Thu Apr 27, 2006 11:00 pm
Location: manchester, stockport

Post Fri Nov 24, 2006 11:24 pm

im about to give up and lose faith, iv cut my templates out and its not happenning im waitin for beadle to pop out, im not using the tabs idea not got the dremel.
oguz327
Captain Armco
Captain Armco
Posts: 4174
Joined: Tue Oct 25, 2005 11:00 pm
Location: Hampshire

Post Sat Nov 25, 2006 1:05 am

Does it have to be a dremel?
noney82
E30 Zone Camper
E30 Zone Camper
Posts: 1102
Joined: Thu Apr 27, 2006 11:00 pm
Location: manchester, stockport

Post Sat Nov 25, 2006 2:39 am

i did away with the tabs so didnt need the dremel but shhhhh dont say anything but a woman cut the templates out to the right shape for me shhhhhhhhh!!!! anyway iv got them done just waiting on the sealer to set now the re wire the angel eyes up still em in car and wooohoooo back in business, will post some pics up tommorrow :D
mrLEE30
E30 Zone Team Member
E30 Zone Team Member
Posts: 6589
Joined: Tue Jan 18, 2005 11:00 pm
Location: Sweating buckets in Bahrain

Post Sat Nov 25, 2006 8:44 am

i just drilled my mainbeam light with a normal drill bit (4mm for metal) just dont push very hard and have the drill spinning as fast as possible or else the glass/mirror will crack. then push the angeleye wires through and seal the hole with hightemp silicone.
Image
noney82
E30 Zone Camper
E30 Zone Camper
Posts: 1102
Joined: Thu Apr 27, 2006 11:00 pm
Location: manchester, stockport

Post Sat Nov 25, 2006 4:09 pm

im never doing them again didnt know lights stressed you out so much :x
karaokebykris
E30 Zone Newbie
E30 Zone Newbie
Posts: 217
Joined: Sun Jul 30, 2006 11:00 pm
Location: Staffs

Post Sat Nov 25, 2006 5:20 pm

Got some pics of mine now! see below!

I think they look the dogs!

Image

Image
It is meaningless to ask; which is real, 'real' or imaginary? It is simply a matter of which is the more useful description

"One valuable thing to remember is that light tavels faster than sound, some people appear quite bright until they speak
noney82
E30 Zone Camper
E30 Zone Camper
Posts: 1102
Joined: Thu Apr 27, 2006 11:00 pm
Location: manchester, stockport

Post Tue Nov 28, 2006 7:46 pm

noney82
E30 Zone Camper
E30 Zone Camper
Posts: 1102
Joined: Thu Apr 27, 2006 11:00 pm
Location: manchester, stockport

Post Tue Nov 28, 2006 7:46 pm

oh my god why they not worked bear with me
noney82
E30 Zone Camper
E30 Zone Camper
Posts: 1102
Joined: Thu Apr 27, 2006 11:00 pm
Location: manchester, stockport

Post Tue Nov 28, 2006 7:48 pm

finally got them in, hers a few snaps of my painfull quest,
Image

Image
Image
Image
Last edited by noney82 on Tue Nov 28, 2006 7:52 pm, edited 2 times in total.