smoked headlights
Moderator: martauto
-
mrLEE30
- E30 Zone Team Member

- Posts: 6589
- Joined: Tue Jan 18, 2005 11:00 pm
- Location: Sweating buckets in Bahrain
it would not be too thick but it would be hard to cut. i used 2/3mm tinned steel sheet. easy to cut with tin snips
mrlee
mrlee

-
noney82
- E30 Zone Camper

- Posts: 1102
- Joined: Thu Apr 27, 2006 11:00 pm
- Location: manchester, stockport
i made my cross bits out of an old dvd plastic case much easyier to work with
and you dont use that light all the time so wont melt, would of used steel but im not good at making things by guess work found it hard enough with plastic, could do with a template being made up and a copy put up by some one so it could be printed of and used by others.
managed to get the angel bulb to fit after a bit a altering, cheers mrlee.
and you dont use that light all the time so wont melt, would of used steel but im not good at making things by guess work found it hard enough with plastic, could do with a template being made up and a copy put up by some one so it could be printed of and used by others.
managed to get the angel bulb to fit after a bit a altering, cheers mrlee.
-
Richy325iTouring
- E30 Zone Addict

- Posts: 3490
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Newport SouthWales
might make a template up
i have some crosshairs here to do it
i have some crosshairs here to do it

-
noney82
- E30 Zone Camper

- Posts: 1102
- Joined: Thu Apr 27, 2006 11:00 pm
- Location: manchester, stockport
that would be mint idea cos i might re do mine then, how you hold them in place
-
Richy325iTouring
- E30 Zone Addict

- Posts: 3490
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Newport SouthWales
a hle through the refector
a tab bends over from the crosshair then
just seal it up
a tab bends over from the crosshair then
just seal it up

-
noney82
- E30 Zone Camper

- Posts: 1102
- Joined: Thu Apr 27, 2006 11:00 pm
- Location: manchester, stockport
ahhhhhh right like a slice in the back
i defo need your template iv put a blob o sealer on them
i defo need your template iv put a blob o sealer on them
-
bigkev
- E30 Zone Regular

- Posts: 612
- Joined: Wed Jul 27, 2005 11:00 pm
- Location: hibernating till summer
-
noney82
- E30 Zone Camper

- Posts: 1102
- Joined: Thu Apr 27, 2006 11:00 pm
- Location: manchester, stockport
iv got a spare set lights might hope some1 puts a template up and do them ones properly, im not sure one what type of angel eye bulbs to get tho as i got some off theo on here so iv transfered them in to the smoked lights iv done, so what type buls i get?????
what is epoxy resin why it good iv heard loads ppl talk about it
what is epoxy resin why it good iv heard loads ppl talk about it
-
ste
- Old Skooler

- Posts: 1173
- Joined: Mon Feb 07, 2005 11:00 pm
- Location: West Sussex
I took delivery of the last ever set of Geniune Smoked Hellas from Hella Germany last weekend. These are boxed, brand new with all connectors, new backings, holders etc. Hella have now stopped production and won't be making any more.
Serious offers considered via PM. Please don't PM me asking how much I want. Please try to write in legible sentences.
For a good enough offer I may part with them, otherwise I'll keep them as spares in case I damage one of mine.
Cheers!
Serious offers considered via PM. Please don't PM me asking how much I want. Please try to write in legible sentences.
For a good enough offer I may part with them, otherwise I'll keep them as spares in case I damage one of mine.
Cheers!
-
karaokebykris
- E30 Zone Newbie

- Posts: 217
- Joined: Sun Jul 30, 2006 11:00 pm
- Location: Staffs
In the process of smoking my bosch units at the moment, Lenses came off really easy with a heat gun, small blade screwdriver, lots of patience and a tiny amount of care!
No lights on my car now so i can't go out tonight and waiting for the paint to dry is killing me!
should have them all back together this evening and then let the sealant go of overnight and pop them in tomorrow morning! Will post some pics up when i have reassembled everything! Got a couple of spare sets knocking around so i will probably do them too when I have a spare evening. Was thinking about doing a template for people to print out myself but if it is already in hand....

No lights on my car now so i can't go out tonight and waiting for the paint to dry is killing me!
should have them all back together this evening and then let the sealant go of overnight and pop them in tomorrow morning! Will post some pics up when i have reassembled everything! Got a couple of spare sets knocking around so i will probably do them too when I have a spare evening. Was thinking about doing a template for people to print out myself but if it is already in hand....
It is meaningless to ask; which is real, 'real' or imaginary? It is simply a matter of which is the more useful description
"One valuable thing to remember is that light tavels faster than sound, some people appear quite bright until they speak
"One valuable thing to remember is that light tavels faster than sound, some people appear quite bright until they speak
-
dazleeds
- old skool raver

- Posts: 12883
- Joined: Fri Apr 01, 2005 11:00 pm
- Location: Empire Building @
i have the template in pdf
came from r3v if anyone needs it
came from r3v if anyone needs it
www.oldskoolfantasy.co.uk
in the shit,the one to blame,yeh its all my fault ;)
in the shit,the one to blame,yeh its all my fault ;)
-
karaokebykris
- E30 Zone Newbie

- Posts: 217
- Joined: Sun Jul 30, 2006 11:00 pm
- Location: Staffs
I will have a copy of the template please Daz, save me fiddling around with bits of card again when i do the next set lol
It is meaningless to ask; which is real, 'real' or imaginary? It is simply a matter of which is the more useful description
"One valuable thing to remember is that light tavels faster than sound, some people appear quite bright until they speak
"One valuable thing to remember is that light tavels faster than sound, some people appear quite bright until they speak
-
ed325i
- E30 Zone Addict

- Posts: 4146
- Joined: Mon Jan 10, 2005 11:00 pm
Can I have a template please.dazleeds wrote:i have the template in pdf
came from r3v if anyone needs it
I have go the lenses off ready
-
dazleeds
- old skool raver

- Posts: 12883
- Joined: Fri Apr 01, 2005 11:00 pm
- Location: Empire Building @
wont allow me to save pic from the pdf so cant post it up 
Last edited by dazleeds on Thu Nov 23, 2006 6:49 pm, edited 1 time in total.
www.oldskoolfantasy.co.uk
in the shit,the one to blame,yeh its all my fault ;)
in the shit,the one to blame,yeh its all my fault ;)
-
ed325i
- E30 Zone Addict

- Posts: 4146
- Joined: Mon Jan 10, 2005 11:00 pm
E mail sent.dazleeds wrote:email me and ill send you it fella
daztech1@ntlworld.com
wont allow me to save pic from the pdf so cant post it up
-
dazleeds
- old skool raver

- Posts: 12883
- Joined: Fri Apr 01, 2005 11:00 pm
- Location: Empire Building @
ed and kris sent 
feel free to make me 1 each if you wish
yes i really am that lazy
feel free to make me 1 each if you wish
yes i really am that lazy
www.oldskoolfantasy.co.uk
in the shit,the one to blame,yeh its all my fault ;)
in the shit,the one to blame,yeh its all my fault ;)
-
ed325i
- E30 Zone Addict

- Posts: 4146
- Joined: Mon Jan 10, 2005 11:00 pm
I have had a play need a bit of work.


-
noney82
- E30 Zone Camper

- Posts: 1102
- Joined: Thu Apr 27, 2006 11:00 pm
- Location: manchester, stockport
cheers daz its opened in adobe how do i change the print @ 300dpl
-
oguz327
- Captain Armco

- Posts: 4174
- Joined: Tue Oct 25, 2005 11:00 pm
- Location: Hampshire
Cheers Daz,
just need to borrow a heat gun now, dont fance my chance's using the oven
just need to borrow a heat gun now, dont fance my chance's using the oven
-
oguz327
- Captain Armco

- Posts: 4174
- Joined: Tue Oct 25, 2005 11:00 pm
- Location: Hampshire
Where are you fella's getting the sheet steel from?
-
spook
- League two here we come !!!
- Posts: 7583
- Joined: Sat Aug 19, 2006 11:00 pm
- Location: portsmouth
why didnt they do smoked lights on blue peter years ago 
-
noney82
- E30 Zone Camper

- Posts: 1102
- Joined: Thu Apr 27, 2006 11:00 pm
- Location: manchester, stockport
how do i make the holes in the back of the light for the tabs to go through?
-
karaokebykris
- E30 Zone Newbie

- Posts: 217
- Joined: Sun Jul 30, 2006 11:00 pm
- Location: Staffs
I used sheet steel chopped out of an old bootlid, Heat guns are cheap enough, I bought mine from screwfix only about £11 i think and well worth it! post some pics up tomorrow
It is meaningless to ask; which is real, 'real' or imaginary? It is simply a matter of which is the more useful description
"One valuable thing to remember is that light tavels faster than sound, some people appear quite bright until they speak
"One valuable thing to remember is that light tavels faster than sound, some people appear quite bright until they speak
-
noney82
- E30 Zone Camper

- Posts: 1102
- Joined: Thu Apr 27, 2006 11:00 pm
- Location: manchester, stockport
any1noney82 wrote:how do i make the holes in the back of the light for the tabs to go through?
-
noney82
- E30 Zone Camper

- Posts: 1102
- Joined: Thu Apr 27, 2006 11:00 pm
- Location: manchester, stockport
-
noney82
- E30 Zone Camper

- Posts: 1102
- Joined: Thu Apr 27, 2006 11:00 pm
- Location: manchester, stockport
im about to give up and lose faith, iv cut my templates out and its not happenning im waitin for beadle to pop out, im not using the tabs idea not got the dremel.
-
oguz327
- Captain Armco

- Posts: 4174
- Joined: Tue Oct 25, 2005 11:00 pm
- Location: Hampshire
Does it have to be a dremel?
-
noney82
- E30 Zone Camper

- Posts: 1102
- Joined: Thu Apr 27, 2006 11:00 pm
- Location: manchester, stockport
i did away with the tabs so didnt need the dremel but shhhhh dont say anything but a woman cut the templates out to the right shape for me shhhhhhhhh!!!! anyway iv got them done just waiting on the sealer to set now the re wire the angel eyes up still em in car and wooohoooo back in business, will post some pics up tommorrow 
-
mrLEE30
- E30 Zone Team Member

- Posts: 6589
- Joined: Tue Jan 18, 2005 11:00 pm
- Location: Sweating buckets in Bahrain
i just drilled my mainbeam light with a normal drill bit (4mm for metal) just dont push very hard and have the drill spinning as fast as possible or else the glass/mirror will crack. then push the angeleye wires through and seal the hole with hightemp silicone.

-
noney82
- E30 Zone Camper

- Posts: 1102
- Joined: Thu Apr 27, 2006 11:00 pm
- Location: manchester, stockport
im never doing them again didnt know lights stressed you out so much 
-
karaokebykris
- E30 Zone Newbie

- Posts: 217
- Joined: Sun Jul 30, 2006 11:00 pm
- Location: Staffs
Got some pics of mine now! see below!
I think they look the dogs!


I think they look the dogs!


It is meaningless to ask; which is real, 'real' or imaginary? It is simply a matter of which is the more useful description
"One valuable thing to remember is that light tavels faster than sound, some people appear quite bright until they speak
"One valuable thing to remember is that light tavels faster than sound, some people appear quite bright until they speak
-
noney82
- E30 Zone Camper

- Posts: 1102
- Joined: Thu Apr 27, 2006 11:00 pm
- Location: manchester, stockport
finally got them in, hers a few snaps of my painfull quest,
[img]http://i84.photobucket.com/albums/k12/n ... CD0001.jpg[img/]
[img]http://i84.photobucket.com/albums/k12/n ... CD0002.jpg[img/]
[img]http://i84.photobucket.com/albums/k12/n ... CD0003.jpg[img/]
[img]http://i84.photobucket.com/albums/k12/n ... CD0004.jpg[img/]
[img]http://i84.photobucket.com/albums/k12/n ... 0005-2.jpg[img/]
sorry if they come out to big
[img]http://i84.photobucket.com/albums/k12/n ... CD0001.jpg[img/]
[img]http://i84.photobucket.com/albums/k12/n ... CD0002.jpg[img/]
[img]http://i84.photobucket.com/albums/k12/n ... CD0003.jpg[img/]
[img]http://i84.photobucket.com/albums/k12/n ... CD0004.jpg[img/]
[img]http://i84.photobucket.com/albums/k12/n ... 0005-2.jpg[img/]
sorry if they come out to big
-
noney82
- E30 Zone Camper

- Posts: 1102
- Joined: Thu Apr 27, 2006 11:00 pm
- Location: manchester, stockport
oh my god why they not worked bear with me
-
noney82
- E30 Zone Camper

- Posts: 1102
- Joined: Thu Apr 27, 2006 11:00 pm
- Location: manchester, stockport
finally got them in, hers a few snaps of my painfull quest,








Last edited by noney82 on Tue Nov 28, 2006 7:52 pm, edited 2 times in total.


