I need a quickshift kit

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

User avatar
northloop
E30 Zone Regular
E30 Zone Regular
Posts: 944
Joined: Wed Aug 16, 2006 11:00 pm

Post Tue Nov 21, 2006 7:51 am

My selector is knackered so it's time for a quick shift kit. What's best, whats best value and where from?

Cheers
Gary
User avatar
buster
E30 Zone Addict
E30 Zone Addict
Posts: 3779
Joined: Sun Jan 09, 2005 11:00 pm
Location: Near middlesbrough,Teesside

Post Tue Nov 21, 2006 8:08 am

Genuine bmw gear lever from a z3.With all the bushes and new lever it comes to less than £50.
User avatar
northloop
E30 Zone Regular
E30 Zone Regular
Posts: 944
Joined: Wed Aug 16, 2006 11:00 pm

Post Tue Nov 21, 2006 8:21 am

Excellent I like the sound of that. From memory its also a shorter throw? Is it a direct fit for an E30?

Which Z3 by the way?

Thanks for the help

Gary
User avatar
buster
E30 Zone Addict
E30 Zone Addict
Posts: 3779
Joined: Sun Jan 09, 2005 11:00 pm
Location: Near middlesbrough,Teesside

Post Tue Nov 21, 2006 8:26 am

i used the 1.9 version on my e30.Its a direct replacement.Also its a chance to replace the worn out plastic cup bush and the little shims and bushes on the linkage.Some people have used the z4 version which i think is shorter still !
march109
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6632
Joined: Sun Aug 20, 2006 11:00 pm
Location: Bournemouth

Post Tue Nov 21, 2006 8:28 am

stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Tue Nov 21, 2006 10:35 am

Image

does this help? i havnt got a clue what the numbers mean on the middle of the shaft, but the digits at the top are what model BMW it came from
Image
User avatar
northloop
E30 Zone Regular
E30 Zone Regular
Posts: 944
Joined: Wed Aug 16, 2006 11:00 pm

Post Tue Nov 21, 2006 7:16 pm

Thanks for all the info and help on this.

The parts price list in the technical section was that from a main BMW dealer or an independant?

I will my local dealer a call Tomorrow and see what they can offer me.

gary
Demlotcrew
E30 Zone Team Member
E30 Zone Team Member
Posts: 13329
Joined: Mon Dec 20, 2004 11:00 pm
Location: East Anglia

Post Wed Nov 22, 2006 9:11 am

Get the 2.8/3.0 one its good for track!

Andrew
Geeman
Married to the E30 Zone
Married to the E30 Zone
Posts: 7641
Joined: Sun Jan 09, 2005 11:00 pm
Location: Grimsby, Lincolnshire

Post Wed Nov 22, 2006 9:23 am

I have to agree with Andrew... the Z3 2.8/3.0 is the one to go for... 8)

I've had both the 1.9 & 2.8 levers and the 2.8 felt great... always fancied going for the Z4 3.0 lever just to see what it's like...
User avatar
northloop
E30 Zone Regular
E30 Zone Regular
Posts: 944
Joined: Wed Aug 16, 2006 11:00 pm

Post Wed Nov 22, 2006 11:52 am

Would you get these direct from a BMW main dealer?
Theo
Old Skooler
Old Skooler
Posts: 10735
Joined: Wed Jun 01, 2005 11:00 pm
Location: Kent

Post Wed Nov 22, 2006 11:53 am

Yes
User avatar
jon_pure_british
E30 Zone Regular
E30 Zone Regular
Posts: 604
Joined: Sun May 07, 2006 11:00 pm

Post Wed Nov 22, 2006 1:12 pm

lol look at that z4 2.5 one, thats very short!

i reckon ill end up fitting one from a z3 1.9 if thats any help to you.
Clacton-On-Sea
Essex
Image
Geeman
Married to the E30 Zone
Married to the E30 Zone
Posts: 7641
Joined: Sun Jan 09, 2005 11:00 pm
Location: Grimsby, Lincolnshire

Post Wed Nov 22, 2006 1:14 pm

The Z4 2.5 lever has a shorter lower length, which in turn makes it a longer throw for your hand between gears... to make a 'short shift' you need a longer lower section.
User avatar
jokipea
E30 Zone Newbie
E30 Zone Newbie
Posts: 84
Joined: Tue May 31, 2005 11:00 pm
Location: 5 miles from Knockhill as the crow flies

Post Wed Nov 22, 2006 5:10 pm

Can the ball that the gear-lever pivots on be moved to give a DIY quick-shift? I have a Tiger Super Six kitcar and used to be a member of the forum for the guys building them. Most used the Pinto engine and Ford Type 9 gearbox. I vaguely remember that someone had made a DIY quickshift by holding the ball part in vice and using tool No. 1(big hammer) to knock the lever down through it, to change ratio. My memory could be playing tricks and this is complete bollocks. It would also depend on how the ball is fixed to lever, seem to remember that Ford one was interference fit allowing it to move using force. Anybody know if this could be done?
johnono
E30 Zone Addict
E30 Zone Addict
Posts: 4677
Joined: Mon Jan 10, 2005 11:00 pm
Location: land of the vikings

Post Wed Nov 22, 2006 7:09 pm

i had the 3.0 z4 on mine. very short but notchy

nice and stumpy look, and only about 5 cm between 1st and 2nd lol

Image
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Wed Nov 22, 2006 10:33 pm

i've driving the Z4 2.5 and the 3.0 loadsa times, and they dont really deel any different. i've also driven loadsa 2.8/3.0 Z3's, and i cant decide which feels the shortest

to be honest, its hard to say what it will feel like until you've put it all inot your car anyway!
Image
johnono
E30 Zone Addict
E30 Zone Addict
Posts: 4677
Joined: Mon Jan 10, 2005 11:00 pm
Location: land of the vikings

Post Wed Nov 22, 2006 11:28 pm

stu, are they in the original cars on in e30s?
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Thu Nov 23, 2006 11:05 am

johnono wrote:stu, are they in the original cars on in e30s?
eh?!
Image
johnono
E30 Zone Addict
E30 Zone Addict
Posts: 4677
Joined: Mon Jan 10, 2005 11:00 pm
Location: land of the vikings

Post Thu Nov 23, 2006 11:42 am

stuartgallafant wrote:i've driving the Z4 2.5 and the 3.0 loadsa times, and they dont really deel any different. i've also driven loadsa 2.8/3.0 Z3's, and i cant decide which feels the shortest

to be honest, its hard to say what it will feel like until you've put it all inot your car anyway!
have you tried all the sticks in their respective cars or are they conversions in e30s?
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Thu Nov 23, 2006 1:21 pm

oh right...

as i said mate, i've driven loads of Z3's and Z4's but i cant quite imagine how they would feel if they were insalled in an E30
Image
User avatar
northloop
E30 Zone Regular
E30 Zone Regular
Posts: 944
Joined: Wed Aug 16, 2006 11:00 pm

Post Thu Nov 23, 2006 1:48 pm

Thanks for the help on this one guys. Order is placed, I went for the Z3 2.8 parts in the end. Cost £46 including VAT.

Gary
Geeman
Married to the E30 Zone
Married to the E30 Zone
Posts: 7641
Joined: Sun Jan 09, 2005 11:00 pm
Location: Grimsby, Lincolnshire

Post Thu Nov 23, 2006 1:49 pm

:cool:
schuey
E30 Zone Regular
E30 Zone Regular
Posts: 510
Joined: Mon Sep 11, 2006 11:00 pm
Location: east yorks

Post Thu Nov 23, 2006 4:37 pm

I just fitted one I got off fleabay. The action is spot on but unfortunately thye linkage now catches the prop in 4th! Oh well,will modify it with a hammer tomorrow!

50% less throw and all a bit notchy but its cool :cool:
Image
318 IS. Sold.
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Thu Nov 23, 2006 7:59 pm

hammer is the best way mate!
Image
schuey
E30 Zone Regular
E30 Zone Regular
Posts: 510
Joined: Mon Sep 11, 2006 11:00 pm
Location: east yorks

Post Fri Nov 24, 2006 8:17 pm

Hammer sorted it out,fixed my master and slave cylinder at the same time.
How much of a :cens: are the master cylinder bolts-I was at it for ages bloody thing. Feels good now tho! :cool:
Image
318 IS. Sold.
johnono
E30 Zone Addict
E30 Zone Addict
Posts: 4677
Joined: Mon Jan 10, 2005 11:00 pm
Location: land of the vikings

Post Fri Nov 24, 2006 8:47 pm

get some pics up of the throw lenght between 1st and 2nd mate :D