I need a quickshift kit
Moderator: martauto
-
northloop
- E30 Zone Regular

- Posts: 944
- Joined: Wed Aug 16, 2006 11:00 pm
My selector is knackered so it's time for a quick shift kit. What's best, whats best value and where from?
Cheers
Gary
Cheers
Gary
-
buster
- E30 Zone Addict

- Posts: 3779
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Near middlesbrough,Teesside
Genuine bmw gear lever from a z3.With all the bushes and new lever it comes to less than £50.
-
northloop
- E30 Zone Regular

- Posts: 944
- Joined: Wed Aug 16, 2006 11:00 pm
Excellent I like the sound of that. From memory its also a shorter throw? Is it a direct fit for an E30?
Which Z3 by the way?
Thanks for the help
Gary
Which Z3 by the way?
Thanks for the help
Gary
-
buster
- E30 Zone Addict

- Posts: 3779
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Near middlesbrough,Teesside
i used the 1.9 version on my e30.Its a direct replacement.Also its a chance to replace the worn out plastic cup bush and the little shims and bushes on the linkage.Some people have used the z4 version which i think is shorter still !
-
march109
- Engaged to the E30 Zone

- Posts: 6632
- Joined: Sun Aug 20, 2006 11:00 pm
- Location: Bournemouth
-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon
-
northloop
- E30 Zone Regular

- Posts: 944
- Joined: Wed Aug 16, 2006 11:00 pm
Thanks for all the info and help on this.
The parts price list in the technical section was that from a main BMW dealer or an independant?
I will my local dealer a call Tomorrow and see what they can offer me.
gary
The parts price list in the technical section was that from a main BMW dealer or an independant?
I will my local dealer a call Tomorrow and see what they can offer me.
gary
-
Demlotcrew
- E30 Zone Team Member

- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
Get the 2.8/3.0 one its good for track!
Andrew
Andrew
-
Geeman
- Married to the E30 Zone

- Posts: 7641
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Grimsby, Lincolnshire
I have to agree with Andrew... the Z3 2.8/3.0 is the one to go for...
I've had both the 1.9 & 2.8 levers and the 2.8 felt great... always fancied going for the Z4 3.0 lever just to see what it's like...
I've had both the 1.9 & 2.8 levers and the 2.8 felt great... always fancied going for the Z4 3.0 lever just to see what it's like...
-
northloop
- E30 Zone Regular

- Posts: 944
- Joined: Wed Aug 16, 2006 11:00 pm
Would you get these direct from a BMW main dealer?
-
jon_pure_british
- E30 Zone Regular

- Posts: 604
- Joined: Sun May 07, 2006 11:00 pm
lol look at that z4 2.5 one, thats very short!
i reckon ill end up fitting one from a z3 1.9 if thats any help to you.
i reckon ill end up fitting one from a z3 1.9 if thats any help to you.
Clacton-On-Sea
Essex

Essex

-
Geeman
- Married to the E30 Zone

- Posts: 7641
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Grimsby, Lincolnshire
The Z4 2.5 lever has a shorter lower length, which in turn makes it a longer throw for your hand between gears... to make a 'short shift' you need a longer lower section.
-
jokipea
- E30 Zone Newbie

- Posts: 84
- Joined: Tue May 31, 2005 11:00 pm
- Location: 5 miles from Knockhill as the crow flies
Can the ball that the gear-lever pivots on be moved to give a DIY quick-shift? I have a Tiger Super Six kitcar and used to be a member of the forum for the guys building them. Most used the Pinto engine and Ford Type 9 gearbox. I vaguely remember that someone had made a DIY quickshift by holding the ball part in vice and using tool No. 1(big hammer) to knock the lever down through it, to change ratio. My memory could be playing tricks and this is complete bollocks. It would also depend on how the ball is fixed to lever, seem to remember that Ford one was interference fit allowing it to move using force. Anybody know if this could be done?
-
johnono
- E30 Zone Addict

- Posts: 4677
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: land of the vikings
i had the 3.0 z4 on mine. very short but notchy
nice and stumpy look, and only about 5 cm between 1st and 2nd lol

nice and stumpy look, and only about 5 cm between 1st and 2nd lol

-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon
-
johnono
- E30 Zone Addict

- Posts: 4677
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: land of the vikings
stu, are they in the original cars on in e30s?
-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon
-
johnono
- E30 Zone Addict

- Posts: 4677
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: land of the vikings
have you tried all the sticks in their respective cars or are they conversions in e30s?stuartgallafant wrote:i've driving the Z4 2.5 and the 3.0 loadsa times, and they dont really deel any different. i've also driven loadsa 2.8/3.0 Z3's, and i cant decide which feels the shortest
to be honest, its hard to say what it will feel like until you've put it all inot your car anyway!
-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon
-
northloop
- E30 Zone Regular

- Posts: 944
- Joined: Wed Aug 16, 2006 11:00 pm
Thanks for the help on this one guys. Order is placed, I went for the Z3 2.8 parts in the end. Cost £46 including VAT.
Gary
Gary
-
Geeman
- Married to the E30 Zone

- Posts: 7641
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Grimsby, Lincolnshire
-
schuey
- E30 Zone Regular

- Posts: 510
- Joined: Mon Sep 11, 2006 11:00 pm
- Location: east yorks
I just fitted one I got off fleabay. The action is spot on but unfortunately thye linkage now catches the prop in 4th! Oh well,will modify it with a hammer tomorrow!
50% less throw and all a bit notchy but its cool
50% less throw and all a bit notchy but its cool

318 IS. Sold.
-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon
-
schuey
- E30 Zone Regular

- Posts: 510
- Joined: Mon Sep 11, 2006 11:00 pm
- Location: east yorks
Hammer sorted it out,fixed my master and slave cylinder at the same time.
How much of a
are the master cylinder bolts-I was at it for ages bloody thing. Feels good now tho! 
How much of a

318 IS. Sold.
-
johnono
- E30 Zone Addict

- Posts: 4677
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: land of the vikings
get some pics up of the throw lenght between 1st and 2nd mate 





