Genuine BBS wheels?

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

Cava
E30 Zone Regular
E30 Zone Regular
Posts: 349
Joined: Sat Nov 19, 2005 11:00 pm
Location: South Wales

Post Sun Oct 08, 2006 11:04 pm

Does anybody know if all of the cross spoke alloys factory fitted to BMW's were made by BBS?

Only asking as I currently have four sets of 15" cross spoke alloys, three sets are stamped as 1990, the other set are stamped as 1988. Only the 1988 set are stamped as BBS, the other three sets are marked as BMW and have the same numbers and all other stamps but do not carry the BBS logo.
316eyes
E30 Zone Regular
E30 Zone Regular
Posts: 947
Joined: Fri Feb 18, 2005 11:00 pm
Location: Sunny Greece

Post Sun Oct 08, 2006 11:10 pm

If they don't say BBS, they aren't. BBS are lighter than the BMW x spokes.
I'm not completely perfect.......there are some bits missing or broken.
But the weather here helps!!!
User avatar
orangecurry
E30 Zone Addict
E30 Zone Addict
Posts: 2518
Joined: Mon Apr 11, 2005 11:00 pm
Location: West Sussex

Post Mon Oct 09, 2006 12:50 pm

I have to disagree slightly

there are stamped BMW BBS alloys, there are BBS alloys, and there are BBS copies - Lemars? being one.

Image

here is a picture of the original originals
Cava
E30 Zone Regular
E30 Zone Regular
Posts: 349
Joined: Sat Nov 19, 2005 11:00 pm
Location: South Wales

Post Mon Oct 09, 2006 8:23 pm

The one set carries the same stamps as those in the picture - the other sets have the same stamps but no bbs logo. I know that these were factory originals (to the cars they came off) and they are absolutely identical to the bbs stamped set. Confusing.....
russ325i
E30 Zone Newbie
E30 Zone Newbie
Posts: 141
Joined: Sat Feb 19, 2005 11:00 pm

Post Tue Oct 10, 2006 8:28 pm

my old man recently picked up a 320i with a set of cross spokes, turns out three of them were made by TSW and the other is a BBS - they look identical as far as i can see, the only exception being that the TSW centre caps don't fall to pieces/fall off as they're secured using an allen-bolt..!

Russ
Morat
E30 Zone Team Member
E30 Zone Team Member
Posts: 8943
Joined: Thu Feb 09, 2006 11:00 pm
Location: The Peoples Republic of Yorkshire

Post Thu Nov 02, 2006 10:38 am

Where do FPS cross spokes fit into this picture? Are they aftermarket copies? And more importantly are they as good as BMW or BBS cross spokes?
Cheers....
E30 Touring 0.35 cD - more slippery than prison soap :)

Image
Praise the Lard... and pass the dripping!
Ziggy
E30 Zone Team Member
E30 Zone Team Member
Posts: 11534
Joined: Mon Jan 10, 2005 11:00 pm
Location: floating round my tin can...

Post Thu Nov 02, 2006 10:58 am

russ325i wrote:my old man recently picked up a 320i with a set of cross spokes, turns out three of them were made by TSW and the other is a BBS - they look identical as far as i can see, the only exception being that the TSW centre caps don't fall to pieces/fall off as they're secured using an allen-bolt..!

Russ
The TSW ones are a slightly different offset (ET20 IIRC), & also weigh a lot more - wouldn't recommend mixing them with BBS.
E30 in need of wiring loom smoke since April '11...
Templ8e30
E30 Zone Addict
E30 Zone Addict
Posts: 2801
Joined: Mon Jan 10, 2005 11:00 pm
Location: Ashton-under-Lyne, Lancashire

Post Thu Nov 02, 2006 10:30 pm

Morat wrote:Where do FPS cross spokes fit into this picture? Are they aftermarket copies? And more importantly are they as good as BMW or BBS cross spokes?
Cheers....
I have a set that came off a 325i touring, 2 are BBS 1 is FPS and another is ALU.

They're all identical in weight and looks but differe slightly on the back of the spokes.

I can't see the ALU being a copy as it's made by the same company that cast the M20 manifolds and M-tec steering wheels.

Cheers,

Iain T
Image
2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !
316eyes
E30 Zone Regular
E30 Zone Regular
Posts: 947
Joined: Fri Feb 18, 2005 11:00 pm
Location: Sunny Greece

Post Thu Nov 02, 2006 10:34 pm

Like I said.
If they are not stamped BBS they are not made by BBS, they are copies made by somebody else.
I'm not completely perfect.......there are some bits missing or broken.
But the weather here helps!!!
dobbie82
E30 Zone Addict
E30 Zone Addict
Posts: 4125
Joined: Thu May 05, 2005 11:00 pm
Location: Dolgellau, Wales (NOT A TRADER,broken a car,got lots of bits)

Post Thu Nov 02, 2006 10:39 pm

mine have no manufacturer stamp at all :mad:
e30 related ebay auctions + shop(MY Stuff for Sale), http://tinyurl.com/64aufr
My Feedback on the e30zone: http://tinyurl.com/dobbie82feedback
316eyes
E30 Zone Regular
E30 Zone Regular
Posts: 947
Joined: Fri Feb 18, 2005 11:00 pm
Location: Sunny Greece

Post Thu Nov 02, 2006 11:13 pm

dobbie82 wrote:mine have no manufacturer stamp at all :mad:
Trust a woman to throw a spanner in the works! :surrender:
I'm not completely perfect.......there are some bits missing or broken.
But the weather here helps!!!
gcorky
Boost Junkie
Posts: 2009
Joined: Tue Jul 12, 2005 11:00 pm
Location: n.e england

Post Fri Nov 03, 2006 9:09 am

they seem to differ round the valve area-have a looksy one is raised ,other isnt...
Image

525 sport
Morat
E30 Zone Team Member
E30 Zone Team Member
Posts: 8943
Joined: Thu Feb 09, 2006 11:00 pm
Location: The Peoples Republic of Yorkshire

Post Fri Nov 03, 2006 1:33 pm

316eyes wrote:Like I said.
If they are not stamped BBS they are not made by BBS, they are copies made by somebody else.
Yeah, but it seems some can be stamped BMW even if they're not BBS. Did BMW supply non BBS cross-spokes at some point or did aftermarket suppliers get naughty with the BMW branding?

I guess the underlying question is:
Does it matter if they're stamped BBS or not as long as they're BMW OE equipment?
E30 Touring 0.35 cD - more slippery than prison soap :)

Image
Praise the Lard... and pass the dripping!