Does anybody know if all of the cross spoke alloys factory fitted to BMW's were made by BBS?
Only asking as I currently have four sets of 15" cross spoke alloys, three sets are stamped as 1990, the other set are stamped as 1988. Only the 1988 set are stamped as BBS, the other three sets are marked as BMW and have the same numbers and all other stamps but do not carry the BBS logo.
Genuine BBS wheels?
Moderator: martauto
-
316eyes
- E30 Zone Regular

- Posts: 947
- Joined: Fri Feb 18, 2005 11:00 pm
- Location: Sunny Greece
If they don't say BBS, they aren't. BBS are lighter than the BMW x spokes.
I'm not completely perfect.......there are some bits missing or broken.
But the weather here helps!!!
But the weather here helps!!!
-
orangecurry
- E30 Zone Addict

- Posts: 2518
- Joined: Mon Apr 11, 2005 11:00 pm
- Location: West Sussex
I have to disagree slightly
there are stamped BMW BBS alloys, there are BBS alloys, and there are BBS copies - Lemars? being one.

here is a picture of the original originals
there are stamped BMW BBS alloys, there are BBS alloys, and there are BBS copies - Lemars? being one.
here is a picture of the original originals
-
Cava
- E30 Zone Regular

- Posts: 349
- Joined: Sat Nov 19, 2005 11:00 pm
- Location: South Wales
The one set carries the same stamps as those in the picture - the other sets have the same stamps but no bbs logo. I know that these were factory originals (to the cars they came off) and they are absolutely identical to the bbs stamped set. Confusing.....
-
russ325i
- E30 Zone Newbie

- Posts: 141
- Joined: Sat Feb 19, 2005 11:00 pm
my old man recently picked up a 320i with a set of cross spokes, turns out three of them were made by TSW and the other is a BBS - they look identical as far as i can see, the only exception being that the TSW centre caps don't fall to pieces/fall off as they're secured using an allen-bolt..!
Russ
Russ
-
Morat
- E30 Zone Team Member

- Posts: 8943
- Joined: Thu Feb 09, 2006 11:00 pm
- Location: The Peoples Republic of Yorkshire
Where do FPS cross spokes fit into this picture? Are they aftermarket copies? And more importantly are they as good as BMW or BBS cross spokes?
Cheers....
Cheers....
E30 Touring 0.35 cD - more slippery than prison soap 

Praise the Lard... and pass the dripping!

Praise the Lard... and pass the dripping!
-
Ziggy
- E30 Zone Team Member

- Posts: 11534
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: floating round my tin can...
The TSW ones are a slightly different offset (ET20 IIRC), & also weigh a lot more - wouldn't recommend mixing them with BBS.russ325i wrote:my old man recently picked up a 320i with a set of cross spokes, turns out three of them were made by TSW and the other is a BBS - they look identical as far as i can see, the only exception being that the TSW centre caps don't fall to pieces/fall off as they're secured using an allen-bolt..!
Russ
E30 in need of wiring loom smoke since April '11...
-
Templ8e30
- E30 Zone Addict

- Posts: 2801
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Ashton-under-Lyne, Lancashire
I have a set that came off a 325i touring, 2 are BBS 1 is FPS and another is ALU.Morat wrote:Where do FPS cross spokes fit into this picture? Are they aftermarket copies? And more importantly are they as good as BMW or BBS cross spokes?
Cheers....
They're all identical in weight and looks but differe slightly on the back of the spokes.
I can't see the ALU being a copy as it's made by the same company that cast the M20 manifolds and M-tec steering wheels.
Cheers,
Iain T

2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !
-
316eyes
- E30 Zone Regular

- Posts: 947
- Joined: Fri Feb 18, 2005 11:00 pm
- Location: Sunny Greece
Like I said.
If they are not stamped BBS they are not made by BBS, they are copies made by somebody else.
If they are not stamped BBS they are not made by BBS, they are copies made by somebody else.
I'm not completely perfect.......there are some bits missing or broken.
But the weather here helps!!!
But the weather here helps!!!
-
dobbie82
- E30 Zone Addict

- Posts: 4125
- Joined: Thu May 05, 2005 11:00 pm
- Location: Dolgellau, Wales (NOT A TRADER,broken a car,got lots of bits)
mine have no manufacturer stamp at all 
e30 related ebay auctions + shop(MY Stuff for Sale), http://tinyurl.com/64aufr
My Feedback on the e30zone: http://tinyurl.com/dobbie82feedback
My Feedback on the e30zone: http://tinyurl.com/dobbie82feedback
-
316eyes
- E30 Zone Regular

- Posts: 947
- Joined: Fri Feb 18, 2005 11:00 pm
- Location: Sunny Greece
Trust a woman to throw a spanner in the works!dobbie82 wrote:mine have no manufacturer stamp at all
I'm not completely perfect.......there are some bits missing or broken.
But the weather here helps!!!
But the weather here helps!!!
-
gcorky
- Boost Junkie
- Posts: 2009
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: n.e england
-
Morat
- E30 Zone Team Member

- Posts: 8943
- Joined: Thu Feb 09, 2006 11:00 pm
- Location: The Peoples Republic of Yorkshire
Yeah, but it seems some can be stamped BMW even if they're not BBS. Did BMW supply non BBS cross-spokes at some point or did aftermarket suppliers get naughty with the BMW branding?316eyes wrote:Like I said.
If they are not stamped BBS they are not made by BBS, they are copies made by somebody else.
I guess the underlying question is:
Does it matter if they're stamped BBS or not as long as they're BMW OE equipment?
E30 Touring 0.35 cD - more slippery than prison soap 

Praise the Lard... and pass the dripping!

Praise the Lard... and pass the dripping!

