Following bimmamans thread about engineers reports for his conversion, could you helpful lot help me compile a list of the things Ill need to buy to make my 318i into the above?
Starter for 10 is the front brakes fitted are already from a 325i, and its running on lowered springs,(-40mm IIRC), dunno what difference this makes so far, so what else do I need please?
Mods feel free to move if should be in tech help?
Thanks in anticipation.
Baz
325 conversion shopping list.....
Moderator: martauto
-
bazman
- E30 Zone Regular

- Posts: 316
- Joined: Thu Mar 24, 2005 11:00 pm
- Location: Tobes of Hades lit by flickering torchlight
"Build a man a fire, and he'll be warm for a day. Set a man on fire, and he'll be warm for the rest of his life." - Terry Pratchett.
-
Theo
- Old Skooler

- Posts: 10735
- Joined: Wed Jun 01, 2005 11:00 pm
- Location: Kent
Ideally you will want;
325i front legs (51mm)
325i shocks all round
325i springs all round
325i Roll bars, you may not even have one on the back
325i diff (3.91, 3.64 etc)
325i gearbox
325i engine, inlet, tb, afm, loom, rad
ABS? If you really want to take time
325i exhaust system
Rear disc conversion
No doubt other bits i've forgotten, coding plugs etc
325i front legs (51mm)
325i shocks all round
325i springs all round
325i Roll bars, you may not even have one on the back
325i diff (3.91, 3.64 etc)
325i gearbox
325i engine, inlet, tb, afm, loom, rad
ABS? If you really want to take time
325i exhaust system
Rear disc conversion
No doubt other bits i've forgotten, coding plugs etc
-
alan325i
- E30 Zone Regular

- Posts: 369
- Joined: Mon Feb 14, 2005 11:00 pm
- Location: Yardley, Birmingham
or for the cheaper and quick option..................... sell ur 318 and buy a 325i

-
bazman
- E30 Zone Regular

- Posts: 316
- Joined: Thu Mar 24, 2005 11:00 pm
- Location: Tobes of Hades lit by flickering torchlight
Wow, didnt realise so much would be needed, methinks alan's plan is not a bad one, or try and find a donor and rob as much as poss off that. I am quite attached to my car, and doing this conversion will help me to learn more about it, in terms of maintenance and repairing it.
Food for thought, so thanks guys.
Food for thought, so thanks guys.
"Build a man a fire, and he'll be warm for a day. Set a man on fire, and he'll be warm for the rest of his life." - Terry Pratchett.
-
harry_p
- Engaged to the E30 Zone

- Posts: 5313
- Joined: Thu Oct 12, 2006 11:00 pm
- Location: norfolk
i've had similar thoughts at various points with different cars, in the end it always seems to be quicker, easier and cheaper to just buy the model rather than trying to upgrade from a lower spec. something a lot of people don't like doing as we tend to get attached to our cars!
however, if your shell is very good, with no signs of rust in the usual place, it may well be worth looking out for a mechanically good, but roten body 325.
at least if you have a complete donor car youre not going to miss anything, just be prepared for it to take twice as long as you first thought!
however, if your shell is very good, with no signs of rust in the usual place, it may well be worth looking out for a mechanically good, but roten body 325.
at least if you have a complete donor car youre not going to miss anything, just be prepared for it to take twice as long as you first thought!
-
fuzzy
- He who sleeps with "Gingers"
- Posts: 14351
- Joined: Sat Jun 04, 2005 11:00 pm
- Location: melbourne Australia
i dont understand why people bother with 2.5 conversions instead of just buying a new car.if your going to go to the trouble of an engine conversion you might as well go for something bigger like a 3.5 or even something more unusual 
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Disagree. I find that 316, 318s tend to be much more unmolested and in better body condition than 325s.fuzzy wrote:i dont understand why people bother with 2.5 conversions instead of just buying a new car.if your going to go to the trouble of an engine conversion you might as well go for something bigger like a 3.5 or even something more unusual
There is also the insurance peculiarity, that a 316 with an engine change can be cheaper to insure than a 325.
Rusty/accident damaged donor is the way to go though.
Agree with fuzzy to a degree though, but it's a lot easier/quicker to do a M20B25 conversion for a transplant virgin than to attempt something more advanced as a first go.
-
eamo
- E30 Zone Regular

- Posts: 465
- Joined: Tue Feb 22, 2005 11:00 pm
- Location: Offaly, Ireland
you'll also need an oil cooler and the engine loom
-
Alyman
- E30 Zone Camper

- Posts: 1270
- Joined: Sat Feb 18, 2006 11:00 pm
- Location: Manchester
its something thats been crossing my mind a lot over the last few days as I battle to get the M40 going again. I've got a 325i convertible sitting out the back of the flat just now, which would be my donor car if I do decide to go ahead. Problem is, these days I don't have the time, space or facilities to swap engines over myself ... I might have a word with a couple of local garages to see how much they'd want for doing the bulk of the work... how long do you reckon it would take a proper garage to carry out the full conversion to an M20 - enginge + gearbox, suspension, diff, rear discs etc? would I run into any problems using a convertible as my donor car?
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
These would normally come with the donor!eamo wrote:you'll also need an oil cooler and the engine loom
Personally, I wouldn't worry too much about the oil cooler. Engine oils have come a long way since the E30 325 was designed. The M20B20 was deemed to be OK without one, and the M50B25 doesn't have one either, s any oil cooling requirements must be marginal.
-
bazman
- E30 Zone Regular

- Posts: 316
- Joined: Thu Mar 24, 2005 11:00 pm
- Location: Tobes of Hades lit by flickering torchlight
More pros ad cons then, still up for it if I can find a decent donor!
Thanks again guys.
Thanks again guys.
"Build a man a fire, and he'll be warm for a day. Set a man on fire, and he'll be warm for the rest of his life." - Terry Pratchett.
