Right,
I have an oil leak at the front of my engine, it's not the rocker cover and the profile gaskit looks ay ok but it is all over the front of the block and I have lost quite a considerable about of oil, from half to the first marker on the dipstick in about 2 and 1/2 weeks :S
I think a gaskit might have gone on one of the plates on the front of the block I'm not sure I have gunked it up and cleaned it all down and will see what happens after each drive and hopefully find it. However for now can anyone suggest what might be causing the problem?
cheers all!
318is, oil leak
Moderator: martauto
-
Bob_S
- Engaged to the E30 Zone

- Posts: 5412
- Joined: Sat Jun 11, 2005 11:00 pm
- Location: chester, cheshire
Bollocks to this 24v scrap!
-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon
-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
-
tim_s
- E30 Zone Squatter

- Posts: 1661
- Joined: Thu Feb 03, 2005 11:00 pm
- Location: Bristol/London
-
Sharabi
- E30 Zone Newbie

- Posts: 83
- Joined: Fri Aug 11, 2006 11:00 pm
Had a similar problem with the 318is i jointly own.
it turned out to be the gasket that had gone. (took a while to work this out)
this was due to the fact the oil was Burning off on the manifold, so never saw a drop of oil on the floor.
Should be getting it fixed this weekend.
it turned out to be the gasket that had gone. (took a while to work this out)
this was due to the fact the oil was Burning off on the manifold, so never saw a drop of oil on the floor.
Should be getting it fixed this weekend.
-
Bob_S
- Engaged to the E30 Zone

- Posts: 5412
- Joined: Sat Jun 11, 2005 11:00 pm
- Location: chester, cheshire
I've cleaned the bloody thing up been for a run and now I cant see anything it's all clean and dry!
It was upto the rocker cover but thats fine, I have checked that
It was upto the rocker cover but thats fine, I have checked that
Bollocks to this 24v scrap!



