M50 Engine bay pics

Show off your pride and joy here

Moderator: martauto

stevieg
E30 Zone Newbie
E30 Zone Newbie
Posts: 44
Joined: Fri Aug 04, 2006 11:00 pm
Location: Warrington

Post Mon Aug 07, 2006 7:14 pm

These may be of interest to anyone doing an M50 conversion.
Image
Image
Image
Image
Image
E30BeemerLad
Married to the E30 Zone
Married to the E30 Zone
Posts: 16806
Joined: Mon Mar 28, 2005 11:00 pm
Location: Norfolk

Post Mon Aug 07, 2006 7:16 pm

that looks peachy mate, very factory look :cool:

Need some cold air getting to that filter though, got any plans?
stevieg
E30 Zone Newbie
E30 Zone Newbie
Posts: 44
Joined: Fri Aug 04, 2006 11:00 pm
Location: Warrington

Post Mon Aug 07, 2006 7:30 pm

The air filter is a bit of a comprimise,there is'nt really any room left for a decent size box,could shield it off and give it a feed i suppose....dunno.
User avatar
m3ben05
E30 Zone Addict
E30 Zone Addict
Posts: 2555
Joined: Tue Sep 27, 2005 11:00 pm
Location: High Wycombe

Post Mon Aug 07, 2006 7:47 pm

What about modifying some evo sport brake cooling ducts?

The engine and car look awesome mate - hats off to you sir :D
Image
stevieg
E30 Zone Newbie
E30 Zone Newbie
Posts: 44
Joined: Fri Aug 04, 2006 11:00 pm
Location: Warrington

Post Mon Aug 07, 2006 7:53 pm

Could just take a headlamp out! :D
whipsey
E30 Zone Addict
E30 Zone Addict
Posts: 3731
Joined: Wed May 25, 2005 11:00 pm
Location: kettering

Post Mon Aug 07, 2006 9:59 pm

how much work ws involved in the conversion and what sort of cost only asking cause im still not sure what to do with mine
User avatar
ste
Old Skooler
Old Skooler
Posts: 1173
Joined: Mon Feb 07, 2005 11:00 pm
Location: West Sussex

Post Mon Aug 07, 2006 10:04 pm

Looks like a nice tidy install stevieg. 8)
stevieg
E30 Zone Newbie
E30 Zone Newbie
Posts: 44
Joined: Fri Aug 04, 2006 11:00 pm
Location: Warrington

Post Mon Aug 07, 2006 10:30 pm

whipsey wrote:how much work ws involved in the conversion and what sort of cost only asking cause im still not sure what to do with mine
I was amazed at how easily it all went together,e36 engine,box and prop dropped straight in with no mods,i used e28 engine mounts and a standard e30 gearbox crossmember,a porsche 944 servo for engine clearance,this needs the thread lengthening and a bit chopping off where it attaches to the pedal,a standard e36 325 rad so i could dispense with the separate expansion tank for a neater look,no viscous fan,just a 12"electric blower in front of the rad,xs-power headers,a supersprint middle section and a standard M3 rear box,you need to make a balancer exhaust section between the downpipes and the centre box so you can fit the oxygen sensor.The wiring is not as bad as you might think,quite alot of the colours correspond,alot of the wires on the engine loom side are not used,you need the c101 plug off an e30 engine loom and cut the plug off the m50 engine,then get soldering.No problems on the fuel side just a feed and return,the fuel filter is mounted on the side of the block,the power steering pump and reservoir do not need to be moved but i did need to have new hoses made.
One thing you should know is that if you use an e36 m50 unit you need to fit the sump,oil pick up and dipstick tube from an e34 onto it as the sump needs to be at the front,not the back like an e36.
If you want to go into more detail pm me and i'll tell you everything i can.
Geeman
Married to the E30 Zone
Married to the E30 Zone
Posts: 7641
Joined: Sun Jan 09, 2005 11:00 pm
Location: Grimsby, Lincolnshire

Post Mon Aug 07, 2006 10:33 pm

It looks so clean. No unsightly wiring or pipe-work. Looks great. :cool:
whipsey
E30 Zone Addict
E30 Zone Addict
Posts: 3731
Joined: Wed May 25, 2005 11:00 pm
Location: kettering

Post Mon Aug 07, 2006 10:33 pm

pm sent
E30BeemerLad
Married to the E30 Zone
Married to the E30 Zone
Posts: 16806
Joined: Mon Mar 28, 2005 11:00 pm
Location: Norfolk

Post Mon Aug 07, 2006 10:36 pm

I've only just realised that's in a M3 shell, too busy looking at the lump :D