Adjusting rear platforms
Moderator: martauto
-
w17led
- E30 Zone Regular

- Posts: 357
- Joined: Sun Mar 13, 2005 11:00 pm
I need some serious advice!
My cab is lowered 40mm at the back and is sitting to high, however 60mm rubs way to much.
is there anything i can do lower it just by a litlle more maybe 10mm?
i know there are lowering caps for the front, but can anything be adjusted to bring it a bit lower?
HELP?
My cab is lowered 40mm at the back and is sitting to high, however 60mm rubs way to much.
is there anything i can do lower it just by a litlle more maybe 10mm?
i know there are lowering caps for the front, but can anything be adjusted to bring it a bit lower?
HELP?
-
w17led
- E30 Zone Regular

- Posts: 357
- Joined: Sun Mar 13, 2005 11:00 pm
ed, where to i get these from,
sorry to be thick, but what do they do/ how will it effect my current ride height
sorry to be thick, but what do they do/ how will it effect my current ride height
-
guss300
- E30 Zone Regular

- Posts: 358
- Joined: Sun Jan 16, 2005 11:00 pm
dont mean to sound dumb but what are these lowering caps for the front as i've never heard of them and where can i get them from
guss
guss
-
w17led
- E30 Zone Regular

- Posts: 357
- Joined: Sun Mar 13, 2005 11:00 pm
guss www.mod-world.co.uk do these, it sits above the front struts giving an extra 10mm drop.
-
jcjdavis1
- E30 Zone Camper

- Posts: 1128
- Joined: Thu Apr 13, 2006 11:00 pm
- Location: Paisley Scotland
Hi Looks like the plumbing under the sink try B&Q [joke] 
-
ed325i
- E30 Zone Addict

- Posts: 4146
- Joined: Mon Jan 10, 2005 11:00 pm
I am not sure where you can get these from. They fit on top of the spring so if you unwind them it with make the car sit higher and if you wind them up the car will sit lower.w17led wrote:ed, where to i get these from,
sorry to be thick, but what do they do/ how will it effect my current ride height
ED
-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
Pre-load adjusters, effectively.ed325i wrote:I am not sure where you can get these from. They fit on top of the spring so if you unwind them it with make the car sit higher and if you wind them up the car will sit lower.w17led wrote:ed, where to i get these from,
sorry to be thick, but what do they do/ how will it effect my current ride height
ED
-
BMW_YARD
- E30 Zone Newbie

- Posts: 146
- Joined: Sun Jun 25, 2006 11:00 pm
You can get different thickness spring rubbers, it's item 15 in the link below. these will fine tune your ride height.w17led wrote:I need some serious advice!
My cab is lowered 40mm at the back and is sitting to high, however 60mm rubs way to much.
is there anything i can do lower it just by a litlle more maybe 10mm?
i know there are lowering caps for the front, but can anything be adjusted to bring it a bit lower?
HELP?
http://www.realoem.com/bmw/showparts.do ... g=33&fg=45
-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
Almost as clean as my cars.
ed325i wrote:
ED
-
w17led
- E30 Zone Regular

- Posts: 357
- Joined: Sun Mar 13, 2005 11:00 pm
Ed is that your car?
yes that looks like the perfect option, just need to find out what it is?
bmw_yard : when i put my rear springs in, the original rubber was quite thin, so BMW offer thinner ones?
thanks for the help guys!
Was speaking to Sal, and he said my car should settle a little they been a few days know but still looks the same.
yes that looks like the perfect option, just need to find out what it is?
bmw_yard : when i put my rear springs in, the original rubber was quite thin, so BMW offer thinner ones?
thanks for the help guys!
Was speaking to Sal, and he said my car should settle a little they been a few days know but still looks the same.
-
Ziggy
- E30 Zone Team Member

- Posts: 11534
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: floating round my tin can...
FK make some springs with adjustable platforms like those above... They don't use standard springs though - they come with springs to fit the platforms. I like em - means I can have the back of my car just how I like it 
E30 in need of wiring loom smoke since April '11...
-
w17led
- E30 Zone Regular

- Posts: 357
- Joined: Sun Mar 13, 2005 11:00 pm
Ziggy:
any ideas where i can get them from, do you think a 50mm drop is possible with your option.
thanks
any ideas where i can get them from, do you think a 50mm drop is possible with your option.
thanks
-
ed325i
- E30 Zone Addict

- Posts: 4146
- Joined: Mon Jan 10, 2005 11:00 pm
No its not click on this link >> http://www.e30zone.co.uk/modules.php?na ... ic&t=34036w17led wrote:Ed is that your car?
yes that looks like the perfect option, just need to find out what it is?
bmw_yard : when i put my rear springs in, the original rubber was quite thin, so BMW offer thinner ones?
thanks for the help guys!
Was speaking to Sal, and he said my car should settle a little they been a few days know but still looks the same.
ED


