) But am a bit unsure how to remove the lock so i can put the one from the car in..Removing door lock..
Moderator: martauto
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
Removed the door loom so far (some plank cut the wires rather than unplug the connector ) But am a bit unsure how to remove the lock so i can put the one from the car in..
) But am a bit unsure how to remove the lock so i can put the one from the car in..
-
fowler
- Boost Junkie
- Posts: 3468
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: New Addington/Croydon
what you taking out jon the lock or the barrell
EX A-Tech Workshop bitch !!!
325i Turbo touring (Aka Project Fridge)
gone but not forgotten
325i Turbo touring (Aka Project Fridge)
gone but not forgotten
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
barrel the key goes into..
-
fowler
- Boost Junkie
- Posts: 3468
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: New Addington/Croydon
there is a c clip mate that hold it in place the poop that off and undo the atcual ock on the door an you should just be a case of a 10-15 min job of changing the barell
EX A-Tech Workshop bitch !!!
325i Turbo touring (Aka Project Fridge)
gone but not forgotten
325i Turbo touring (Aka Project Fridge)
gone but not forgotten
-
Chris-W
- E30 Zone Team Member
- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire