some 2006 pics of my 318is

Show off your pride and joy here

Moderator: martauto

User avatar
tim_s
E30 Zone Squatter
E30 Zone Squatter
Posts: 1661
Joined: Thu Feb 03, 2005 11:00 pm
Location: Bristol/London

Post Tue Jun 06, 2006 9:41 pm

been a while since i've posted any pics of my car, the engine rebuild and things have taken a priority over cosmetics etc this year! but here's a few:

took these the other day:

Image

Image

Image

Cheddar meet at the start of the year:
Image

e36 318is vs e30 318is
Image

new 2.1 engine:
Image

Image

throttle bodies:
Image

on sheps' rollers:
Image
Image
2.1 318is, MS, LPG. 200bhp, 175ft/lbs GONE!
Boxster, e46 m3, e36 sport touring and alpina B3 3.0
dark_sounds
E30 Zone Addict
E30 Zone Addict
Posts: 2458
Joined: Thu Dec 01, 2005 11:00 pm

Post Tue Jun 06, 2006 10:48 pm

wow!!

looks good dude!

engine bay looks fab!

btw u dont need that inlet manifold anymore do you winkeye looks sweet man!

any figures?? stats??
oguz327
Captain Armco
Captain Armco
Posts: 4174
Joined: Tue Oct 25, 2005 11:00 pm
Location: Hampshire

Post Tue Jun 06, 2006 10:53 pm

Looks very clean fella, good work.
Id be happy to eat my dinner off of that engine bay, but i dont think you would winkeye
hammoj28
E30 Zone Addict
E30 Zone Addict
Posts: 3310
Joined: Tue Jan 25, 2005 11:00 pm
Location: Aberdeenshire.

Post Tue Jun 06, 2006 11:14 pm

THat looks so dam good! Engine bay looks like you could eat your dinner off it its so clean! Makes mine look shameful! :(
Image
24v tech2
Pal318is
E30 Zone Addict
E30 Zone Addict
Posts: 3494
Joined: Fri Jan 14, 2005 11:00 pm
Location: Kop End - Bedford

Post Wed Jun 07, 2006 7:51 am

Top Dollar...It looks the nuts... :cool:

Pal
Pal

Image[img]http://Image
M42's Run in the Family...The kids sayin 'YNWA'
iDreamBeemer
E30 Zone Camper
E30 Zone Camper
Posts: 1177
Joined: Mon Feb 14, 2005 11:00 pm
Location: Camberley

Post Wed Jun 07, 2006 10:10 am

Looks well nice mate. Shame I missed checking it out at the Cheddar meet (nice to see mine in one of the pics! - the only red e30 there)

How does the extra weight from the conversion affect the handling? Still got the good balance or do you notice the front is heavier?
User avatar
tim_s
E30 Zone Squatter
E30 Zone Squatter
Posts: 1661
Joined: Thu Feb 03, 2005 11:00 pm
Location: Bristol/London

Post Wed Jun 07, 2006 10:21 am

Thanks guys. dark_sounds, i don't have any stats and figures since the engine rebuild. when complete the head, ITBs and cams, I want and should get more than 200bhp, but still have quite a lot of work to do to get there. will be happy with anything over 200bhp when done basically, but will sacrifice a few ponies for good daily manners. at the mo i'd guess i'm at about 160bhp-170bhp, but i have so much torque the car is much faster than standard, just deceptively so. needs more fuel up top though, so there's more to come with just the remap, before cams/head/itbs.
Image
2.1 318is, MS, LPG. 200bhp, 175ft/lbs GONE!
Boxster, e46 m3, e36 sport touring and alpina B3 3.0
User avatar
tim_s
E30 Zone Squatter
E30 Zone Squatter
Posts: 1661
Joined: Thu Feb 03, 2005 11:00 pm
Location: Bristol/London

Post Wed Jun 07, 2006 10:22 am

iDreamBeemer wrote:Looks well nice mate. Shame I missed checking it out at the Cheddar meet (nice to see mine in one of the pics! - the only red e30 there)

How does the extra weight from the conversion affect the handling? Still got the good balance or do you notice the front is heavier?
cheers! no doubt will see you at the next one!
the front isn't heavier. if anything its lighter. although the crank is heavier, i've reduced rotating mass, got a single mass flywheel, and rebored a fair bit of iron out of the block! its still an m42.
Image
2.1 318is, MS, LPG. 200bhp, 175ft/lbs GONE!
Boxster, e46 m3, e36 sport touring and alpina B3 3.0
iDreamBeemer
E30 Zone Camper
E30 Zone Camper
Posts: 1177
Joined: Mon Feb 14, 2005 11:00 pm
Location: Camberley

Post Wed Jun 07, 2006 10:30 am

Nice, don't see too many mods to the m42, I know there are a couple of projects peeps are doing so keeping my eye on them.

You must be well chuffed, having the extra grunt with no adverse impact on the handling....mmmm m42 with real torque!
Bjorno
E30 Zone Newbie
E30 Zone Newbie
Posts: 223
Joined: Fri Nov 11, 2005 11:00 pm
Location: Antwerp

Post Wed Jun 07, 2006 8:45 pm

Ow really like A white E30 IS.
looks great from the outside ad the engine room looks sweet!
User avatar
tim_s
E30 Zone Squatter
E30 Zone Squatter
Posts: 1661
Joined: Thu Feb 03, 2005 11:00 pm
Location: Bristol/London

Post Sat Jun 10, 2006 12:30 am

Thanks guys!
couldn't help myself, I know i posted pics the other day, but the weather was just too good today! i'd also just cleaned the car having done the best part of 1000 miles over the last week or two.

Image

Image

Image

Image

Image

Image
Image
2.1 318is, MS, LPG. 200bhp, 175ft/lbs GONE!
Boxster, e46 m3, e36 sport touring and alpina B3 3.0
dark_sounds
E30 Zone Addict
E30 Zone Addict
Posts: 2458
Joined: Thu Dec 01, 2005 11:00 pm

Post Sat Jun 10, 2006 7:43 pm

they are going to be added to my e30 picture collection :) fantastic pics!

btw dude, how much it all cost in the end? and how long it take you to do such a procedure??

hows the economy after doing 1000 odd miles! lol
Sanchez
Married to the E30 Zone
Married to the E30 Zone
Posts: 7578
Joined: Sun Apr 17, 2005 11:00 pm
Location: Sunny Scotland

Post Sat Jun 10, 2006 10:30 pm

Hi tim awsome car, shame my bays not as clean as yours, Whats the drop and what tire sizes you got , looks better than mine, but thats cause i think yours are 15's and mine only 14's. DO you have sump vs speed hump problems?
User avatar
tim_s
E30 Zone Squatter
E30 Zone Squatter
Posts: 1661
Joined: Thu Feb 03, 2005 11:00 pm
Location: Bristol/London

Post Sun Jun 11, 2006 3:04 pm

dark_sounds wrote:they are going to be added to my e30 picture collection :) fantastic pics!

btw dude, how much it all cost in the end? and how long it take you to do such a procedure??

hows the economy after doing 1000 odd miles! lol
thanks! talking engine only - not ITBs etc i must admit it cost me more than i anticipated, but i did everything properly. got stung on pistons which came from the states, got taxed £70 on them cos the guy in the states insured them in post for more than i paid for them, paid too much for rods, paid too much for machining and the crank work. total was about £1.5k including buying the spare engine etc. but that's with absolutely no corners cut, and i count everything, i havent forgotten the odds and sods that add up! i also got a few hundred back in parts left over, and still have a few parts to flog on. had i gone for a tamer spec it would have cost less. fuel economy is pretty much unchanged, better if anything on the motorway, possibly worse when giving it some beans. i've actually done about 2k on it so far, its on its third load of oil. it does near 40mpg on the motorway, around 30mpg around town and when messing around. im very happy with it, its the most sensible mod to do engine-wise really unless you want to make a 1.8 screamer. and its now totally unique, the only one in the UK etc.

it took me prob 6 months, but i've not excatly been rushing or spending much time on it for a lot of that. the fitting only took a weekend including cleaning, masking and painting the engine bay, doing some bench building and testing clearences etc on the engine etc.

Sanchez wrote:Hi tim awsome car, shame my bays not as clean as yours, Whats the drop and what tire sizes you got , looks better than mine, but thats cause i think yours are 15's and mine only 14's. DO you have sump vs speed hump problems?
cheers! well the engine bay has been resprayed (by me with rattle cans!), and all the covers etc on the engine likewise have been repainted. it used to be well yellow and manky in there! as for the drop im not sure, anyone want to hazard a guess? i'd say about 40mm all round. wheels are 15s, tyres 205/50/15s.
I don't have sump/speed hump probs, the missus on the other hand managed to make a bit of a mess of the front end last year!
i find with humps etc if i just take them slowly, the only thing that ever rubs against anything is an exhaust O clamp or the bottom of the front splitter that doesn't show anyway, so as long as i go slow over stuff like that i don't worry. i wouldn't go any lower though. i can't get on one of my mates' drives though!
Image
2.1 318is, MS, LPG. 200bhp, 175ft/lbs GONE!
Boxster, e46 m3, e36 sport touring and alpina B3 3.0
Sanchez
Married to the E30 Zone
Married to the E30 Zone
Posts: 7578
Joined: Sun Apr 17, 2005 11:00 pm
Location: Sunny Scotland

Post Sun Jun 11, 2006 4:30 pm

My drop is 40mm but on 14s so a bit lower. Ive got bigger profile tyres on the back so its a bit drag car at the moment but front need changing anyway so will go same profile. Keep up the good work.
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Sun Jun 11, 2006 7:54 pm

tim, you're car is looking sweet dude!! you must be chuffed with it!

stiil trying to find the time to play with my M42, but im so bloody busy all the time, i just dont get a chance! anyway, what went in yours in the end? was the M47 crank and rods or something else?

if you can pm/post a spec list up, i'd be well interested to see it
Image
appletree
E30 Zone Addict
E30 Zone Addict
Posts: 3479
Joined: Fri Jan 20, 2006 11:00 pm
Location: Retford

Post Sun Jun 11, 2006 8:25 pm

That looks very nice. where does the power realy come in? is it still around 4000/4500rpm or is it any lower? also is that just a back box or is it a full system? who's it made by? am realy strugaling to find any one who stocks exhusts for the IS apart from having one custom made!
User avatar
tim_s
E30 Zone Squatter
E30 Zone Squatter
Posts: 1661
Joined: Thu Feb 03, 2005 11:00 pm
Location: Bristol/London

Post Mon Jun 12, 2006 1:52 am

appletree wrote:That looks very nice. where does the power realy come in? is it still around 4000/4500rpm or is it any lower? also is that just a back box or is it a full system? who's it made by? am realy strugaling to find any one who stocks exhusts for the IS apart from having one custom made!
no, the car has a pretty different character now, no longer has nothing down low and the sudden sense of urgency when you wind her up at higher rpm. its a bit sad in a way, but i'll get over it! in reality its so much nicer to drive like this! you can overtake in 3rd/4th where 2nd used to be required, and still go just as quick. above 4,500rpm it feels a bit faster than standard but not much. i hope to help it higher up the revs when the headwork/cams/itbs are on, i think the fuelling at the moment (still on moptronic until i pull my finger out and get MS maped) probably doesn't help either.
the exhaust is a sebring system. i've gone on about how much i like it before on here so wont go on too much. its expensive, but much quieter than most other aftermarket exhausts, but makes a great noise anyway, esp with the windows down etc. well made too, mine's lasting really well.
stuartgallafant wrote:tim, you're car is looking sweet dude!! you must be chuffed with it!

stiil trying to find the time to play with my M42, but im so bloody busy all the time, i just dont get a chance! anyway, what went in yours in the end? was the M47 crank and rods or something else?

if you can pm/post a spec list up, i'd be well interested to see it
hi stuart, not sure how much of mine's spec i'll give away, its a bit special and i may keep some of my cards close to my chest on this one - not sure yet. i have no probs giving out info to help with projects etc though of course, and i'll help you along! fwiw, m47 crank needs work to fit, m47 rods are no use for our engine. m47 crank woudl up the capacity to 1.95l if you got a rod/piston combo sorted.
fwiw mine: 2.1l, 10.7:1 CR at the mo, hoping to bring that closer to 11:1 with the headwork. i'm looking at a 7,250rpm rev limit.
Image
2.1 318is, MS, LPG. 200bhp, 175ft/lbs GONE!
Boxster, e46 m3, e36 sport touring and alpina B3 3.0
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Mon Jun 12, 2006 10:30 pm

so how did you get yours to 2.1 then tim? and thanks for the offer. i'll DEFO be taking you up on it!!
Image
User avatar
tim_s
E30 Zone Squatter
E30 Zone Squatter
Posts: 1661
Joined: Thu Feb 03, 2005 11:00 pm
Location: Bristol/London

Post Tue Jun 13, 2006 11:01 pm

stuartgallafant wrote:so how did you get yours to 2.1 then tim? and thanks for the offer. i'll DEFO be taking you up on it!!
everything is different on my bottom end. different pistons, rods, crank, block decked etc. you can go a little bit further capacity-wise, but i wanted factory reliability from mine.
what is it you're looking at from yours?
want me to make you an ITB setup winkeye
Image
2.1 318is, MS, LPG. 200bhp, 175ft/lbs GONE!
Boxster, e46 m3, e36 sport touring and alpina B3 3.0
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Wed Jun 14, 2006 1:32 pm

i like the sound of what you've done to yours. i would like the extrra torque that you've managed to get, and i also want reliability!! thing is, this also needs to come at good price, unless i drag the project out for slightly longer!

im also thinking about ITB's, but ive heard thats an expensive conversion?! but it does make me wet my pants!!! definately the way forward!!
Image
User avatar
tim_s
E30 Zone Squatter
E30 Zone Squatter
Posts: 1661
Joined: Thu Feb 03, 2005 11:00 pm
Location: Bristol/London

Post Wed Jun 14, 2006 4:33 pm

stuartgallafant wrote:i like the sound of what you've done to yours. i would like the extrra torque that you've managed to get, and i also want reliability!! thing is, this also needs to come at good price, unless i drag the project out for slightly longer!

im also thinking about ITB's, but ive heard thats an expensive conversion?! but it does make me wet my pants!!! definately the way forward!!
lol, doing bottom end work to the m42 you can forget doing it on the cheap imo. it just won't happen! 1.9 is fairly easy, 2l a bit more involved and 2.1 more expensive again, but you also have to bear in mind that on whatever you do the parts and machining costs will be high. whatever you do to the bottom end, you'll probably be facing about a £1k bill minimum.

if you go out and buy ITBs they're bloody expensive, the dbilas kit costs £1300, and that's before you consider what you're going to do for fuelling etc (MS mb?). but I can build up some much cheaper home-brewed ones for around £500 though (before the plenum - there's no way i'm going through all that hassle of fibreglassing one of those again! but you could make your own from my spec or just pay somewhere local). these would be pretty mental.
Image
2.1 318is, MS, LPG. 200bhp, 175ft/lbs GONE!
Boxster, e46 m3, e36 sport touring and alpina B3 3.0
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Thu Jun 15, 2006 3:06 pm

sounds interesting tim. thanks for your input. i'll definately be calling on your knowledge and advice in the near future mate!
Image
User avatar
tim_s
E30 Zone Squatter
E30 Zone Squatter
Posts: 1661
Joined: Thu Feb 03, 2005 11:00 pm
Location: Bristol/London

Post Tue Oct 24, 2006 10:23 pm

thought i'd do a little update on here, as its been a while since i've posted about my 2.1 IS project. Hope you like!
Throttle bodies have been on for a few months, since June ish iirc. don't have many great pics, need to clean up the whole engine bay really:
Image

They're working well and proving reliable, I want to make a few improvements, but that will probably wait til next yr.

megasquirt for fuel and sparks has been finished off over the last few months, running a 3" BMW MAF and 24lb injectors. have also wired in an LC1 wideband lambda. done quite a few finishing touches such as wiring in a proper MAF connector, eleccy fan switch connector etc:
Image

MAF connector
Image

Injectors
Image

took a lot of work to get megasquirt going nicely, but its all good pretty much now, although still not as nice as the factory setup really.

added a new momo 350mm steering wheel:
Image
Image
Thanks go to Dips for the hub

And I have started building myself up a late spec cylinder head with narrower valves, uprated lifters etc to go on, I'm in the middle of cleaning it up and flowing it, although i'm being a bit of a part-timer about it really.
Cleaned up:
Image

Flowed inlet ports, there is a bit of room for improvement in terms of smoothing casting marks, there are quite a few machining and casting marks on the original ports, although in fairness they are more or less sound. I doubt this will gain me much power, but looks good!

Image

I've still to do a load of work to do on the combustion chambers and exhaust ports, is time consuming and not high on the list of priorities right at the mo!

I'm more interested in adding LPG to the car atm. The plan is to use direct injectors controlled by megasquirt. Have sourced the injectors, am on the look-out for a doughnut tank etc. Wll be interesting to work out where to position the brass inserts to inject the LPG, am open to suggestions and not sure where the optimum position will be. want it to be very discreet, and will mean removing the TBs to drill them.

Have done 8,000 miles on the 2.1 now, fuel economy is around 30mpg around town, a bit less with a heavy right foot, and just under 35mpg on cruise. I lost a bit of economy going to megasquirt and running the ITBs, nothing too drastic though.
Image
2.1 318is, MS, LPG. 200bhp, 175ft/lbs GONE!
Boxster, e46 m3, e36 sport touring and alpina B3 3.0
maxfield
Old Skooler
Old Skooler
Posts: 15185
Joined: Sat Nov 26, 2005 11:00 pm
Location: Mansfield

Post Tue Oct 24, 2006 10:26 pm

Can i ask why LPG?
Image
User avatar
tim_s
E30 Zone Squatter
E30 Zone Squatter
Posts: 1661
Joined: Thu Feb 03, 2005 11:00 pm
Location: Bristol/London

Post Tue Oct 24, 2006 10:30 pm

I do quite a few miles in the car so i'll hopefully save a load of money, plus I do care about the environemtn etc too, i've always been a bit troubled by my obsession in making old inefficient cars more inefficient!
fwiw with a high compression ratio etc and full control over fuel and sparks through megasquirt, theoretically i should get pretty good performance out of LPG, as well as the obvious fuel savings.
The only bit that really sucks is having to drill the car as the body's pretty tidy, but c'est la vie.
Image
2.1 318is, MS, LPG. 200bhp, 175ft/lbs GONE!
Boxster, e46 m3, e36 sport touring and alpina B3 3.0
Pal318is
E30 Zone Addict
E30 Zone Addict
Posts: 3494
Joined: Fri Jan 14, 2005 11:00 pm
Location: Kop End - Bedford

Post Tue Oct 24, 2006 11:51 pm

Tim,

The engine bay looks superb mate, it really does 8) can only reitirate whats already been said mate, uber cool.

I've saved those pic's too winkeye

Am dieing to do something to mine too, but tbh just really confused :?

Wish me luck 8O

Pal
Pal

Image[img]http://Image
M42's Run in the Family...The kids sayin 'YNWA'
User avatar
tim_s
E30 Zone Squatter
E30 Zone Squatter
Posts: 1661
Joined: Thu Feb 03, 2005 11:00 pm
Location: Bristol/London

Post Wed Oct 25, 2006 12:18 pm

Cheers Pal! what you got in mind for yours then?
btw if you need any work done, im in between jobs atm and so am open to making some pennies doing car work for people!
Image
2.1 318is, MS, LPG. 200bhp, 175ft/lbs GONE!
Boxster, e46 m3, e36 sport touring and alpina B3 3.0
Pal318is
E30 Zone Addict
E30 Zone Addict
Posts: 3494
Joined: Fri Jan 14, 2005 11:00 pm
Location: Kop End - Bedford

Post Fri Oct 27, 2006 12:09 am

tim_s wrote:Cheers Pal! what you got in mind for yours then?
btw if you need any work done, im in between jobs atm and so am open to making some pennies doing car work for people!
Would love a turbo too..I'm still in the process of stripping the engine, got the inlet, injectors all that sort of stuff off, will the engine be ok sitting outside, but covered up (good)? also is there much involved with taking it apart and then putting it back together...

If not turbo, then some different cams and stuff, just a little unsure where to start.

How much for a turbo manifold? roughly, is it cheaper to get one made??

I'm not going to start doing this until next year, but will definately bear you in mind mate when i'm in trouble :(
I'll gladly chuck some pounds your way fella :)

Sorry for the all the Q's :?

Pal
Pal

Image[img]http://Image
M42's Run in the Family...The kids sayin 'YNWA'