Hi guys,
Over the past year the rust on my e30 has got pretty bad and now i think its time to sort it. The only problem is on the rear, wear the mudflaps attach (below bumper), its really bad and the metal is coming off in my hand.
Im not sure how to sort this because of the location, and im not sure whether i can get a replacement panel or something.
Any ideas or tips would be superb
Cheers
DAN
Rust problem, please help!!!
Moderator: martauto
-
DanJones
- E30 Zone Newbie

- Posts: 149
- Joined: Sat Jan 15, 2005 11:00 pm
- Location: Conwy, North Wales
-
liam012
- E30 Zone Camper

- Posts: 1424
- Joined: Sun Aug 28, 2005 11:00 pm
pics would help
but if metal is actually coming of in your hands it aint good.
you will need to get this cut out and even a few mm of good metal to so ytou are sure the rot is stopped. get a nice new plate welded in there.
shouldn't be to pricey as access is ok in that area so labour aint too bad
you'd be surprised what a good panel beater can do.
try and get a pic up but i'd say thats the only route,
but if metal is actually coming of in your hands it aint good.
you will need to get this cut out and even a few mm of good metal to so ytou are sure the rot is stopped. get a nice new plate welded in there.
shouldn't be to pricey as access is ok in that area so labour aint too bad
you'd be surprised what a good panel beater can do.
try and get a pic up but i'd say thats the only route,
-
DanJones
- E30 Zone Newbie

- Posts: 149
- Joined: Sat Jan 15, 2005 11:00 pm
- Location: Conwy, North Wales
Righto, only thing is though im trying not to spend much on it at all, the car isnt worth much anymore (1984 on 168000 miles) so if it works out to be pretty pricy, might have to say goodbye to a nice looking e30
What sort of price do you reckon for welding plates on there and such like?
Dan
What sort of price do you reckon for welding plates on there and such like?
Dan
-
liam012
- E30 Zone Camper

- Posts: 1424
- Joined: Sun Aug 28, 2005 11:00 pm
I am in ireland prices are different - and they vary beater to beater too - and so does the quality....
depends what sort of size area we're talking and spraying too.
perhaps someone from the uk will know...
depends what sort of size area we're talking and spraying too.
perhaps someone from the uk will know...
-
DanJones
- E30 Zone Newbie

- Posts: 149
- Joined: Sat Jan 15, 2005 11:00 pm
- Location: Conwy, North Wales
Ok, cheers liam. Guess ill have to get down to a bodyshop sometime soon then. I know a bloke who owns a big one here in north wales so that might be useful.
Thanks again
Dan
Thanks again
Dan
