Pics of my 318is track car....56k beware UPDATED 13/5/2006

Show off your pride and joy here

Moderator: martauto

User avatar
chaosss
E30 Zone Newbie
E30 Zone Newbie
Posts: 79
Joined: Fri May 06, 2005 11:00 pm

Post Thu Jan 05, 2006 11:03 pm

Hello,

Been on here a while but not done much posting. Thought I would post some pics here of my is track car. Will try and keep updating it as work happens.

Bear in mind that I am doing this on quite a tight budget so some of the obvious upgrades (coilovers, BBTB) haven't been done yet.

Anyway the base car bought for Ԛ£690 from Ebay (I never saw it just took the chance). 169k with almost full history.


Image
Image

With my old 530D on the day of pick up
Image

Started stripping weight straight away
Image
Image
Image

Seats in

Image

Roll cage fitted and ready for first track day
Image
Image

Image
Last edited by chaosss on Sat May 13, 2006 6:11 pm, edited 5 times in total.
User avatar
chaosss
E30 Zone Newbie
E30 Zone Newbie
Posts: 79
Joined: Fri May 06, 2005 11:00 pm

Post Thu Jan 05, 2006 11:09 pm

Used it like this for a few trackdays.

Slight argument with the tyres at Castle Combe :oops:

Image

Couple of pictures in action at Donnington:

Image

Image

Did mainly combe and the one day at Donnington last year and now over winter doing a lot more work[/img]


Edit: Not sure why the pics aren't working here. If anyone knows why and is a mod feel free to edit it :wink:
Last edited by chaosss on Thu Jan 05, 2006 11:20 pm, edited 2 times in total.
User avatar
chaosss
E30 Zone Newbie
E30 Zone Newbie
Posts: 79
Joined: Fri May 06, 2005 11:00 pm

Post Thu Jan 05, 2006 11:16 pm

End of season with the Z3 (chopped in the 530D)
Image

Roll cage and passenger seat then removed for ease of access to interior.

Sound deadening removed (needs sanding and painting)
Image

Image

Bonnet removed and all hinges removed for weight saving
Image

Image

Washer jets relocated:
Image

bonnet pins fitted
Image

Then removed the dashboard so a lot of wiring can be stripped out (converting to manual windows etc)
Image

Then painted rollcage (only 1 section shown)
Image

Created some lightweight doorcards :D
Image



that is it in its current state. At the moment I am working on the wiring. The battery is going to the boot and FIA approved cut off switches installed. Hopefully sand and paint the interior in the next couple of weeks then start on the performance mods (coilovers and semi-slick tyres. Poss BBTB if I can afford it)

Hope you like the pics and it hasn't taken too long to download

I will update as I go. Any suggestions always welcome.
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Thu Jan 05, 2006 11:22 pm

looked awful with the wheels in the first pic,but looks cool on the BBS`s!

Looks like your in it for the long haul!

Excellent pictures,keep them updated as you progress more.

PS a late welcome to the Zone :)
Image
User avatar
chaosss
E30 Zone Newbie
E30 Zone Newbie
Posts: 79
Joined: Fri May 06, 2005 11:00 pm

Post Thu Jan 05, 2006 11:25 pm

eko wrote:looked awful with the wheels in the first pic
Couldn't agree more
eko wrote:PS a late welcome to the Zone :)


Thanks
User avatar
stevetigger
E30 Zone Addict
E30 Zone Addict
Posts: 4659
Joined: Thu Feb 24, 2005 11:00 pm

Post Fri Jan 06, 2006 4:59 pm

Wicked!
E30Mark
E30 Zone Team Member
E30 Zone Team Member
Posts: 8107
Joined: Sun Jan 09, 2005 11:00 pm
Location: Wimborne, Dorset

Post Fri Jan 06, 2006 5:08 pm

Looks like fun!
1 & 2 bed flats in Bournemouth areas, with parking
PM for details
bmwe30mtech
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5288
Joined: Thu Feb 03, 2005 11:00 pm

Post Fri Jan 06, 2006 5:20 pm

Looks great. :D
1988 M3 EvoII, Macau Blue/EvoII trim
1989 325i Sport M Tech II, Diamond Black/Black leather
Bjorno
E30 Zone Newbie
E30 Zone Newbie
Posts: 223
Joined: Fri Nov 11, 2005 11:00 pm
Location: Antwerp

Post Fri Jan 06, 2006 5:37 pm

I'm starting to think to de it with mine to, making it a race look car.

Nice going, I'll keep an eye on this!
User avatar
chaosss
E30 Zone Newbie
E30 Zone Newbie
Posts: 79
Joined: Fri May 06, 2005 11:00 pm

Post Sat Jan 07, 2006 4:34 pm

Update 07/01/2006

Finally managed to get hold of the drivers side manual glass, thanks Jon, so set about installing that first thing.

Stripped the electric mechanism and wiring out from the door (how much wiring just in the door)

Image

Manual mechanism in:

Image

Then decided to start tracing and stripping wiring that I didn't need in the car. Realised while beginning to trace wiring that I had never removed the headlining so did that quickly

Image

Then started tracing the wiring. First bit of loom to remove was the bit was controlled all the electrics in the doors (windows, central locking, mirrors). This also hooks up to the interior lights (from the door switches) and into the alarm. Most of the loom, for these bits, came out easily enough in one piece but the wiring for the interior lights runs around both main interior loom pieces (I assume it is a double ended circuit so that both lights are the same brightness). Removing the first was a doddle but the second bit means tracing loads of wiring. So still carrying on with this bit:

Image

This is something I am not rushing and intend to do properly. I am not going to leave any cut wires hanging around even though it means removing all the BMW wire tidy stuff just to trace a single earth wire sometimes. May as well do it properly and should also ensure there is a greatly reduced chance of any shorting later on.

Here is a pic of hte wiring I have removed today (excluding that from in the doors)
Image

Also intend to remove the alarm completely so any help with the wiring from that would be appreciated. I think it is a Sigma M10 (?) or M4(?)

If people are interested I can continue to update this thread as I carry on.
Bjorno
E30 Zone Newbie
E30 Zone Newbie
Posts: 223
Joined: Fri Nov 11, 2005 11:00 pm
Location: Antwerp

Post Sat Jan 07, 2006 4:47 pm

I'm interested so carry on!
User avatar
stevetigger
E30 Zone Addict
E30 Zone Addict
Posts: 4659
Joined: Thu Feb 24, 2005 11:00 pm

Post Sat Jan 07, 2006 5:09 pm

And me! Looks cheap making a track slag!
bmwe30mtech
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5288
Joined: Thu Feb 03, 2005 11:00 pm

Post Sat Jan 07, 2006 5:15 pm

Me too, i like this thread a lot! :D
1988 M3 EvoII, Macau Blue/EvoII trim
1989 325i Sport M Tech II, Diamond Black/Black leather
mason
E30 Zone Newbie
E30 Zone Newbie
Posts: 224
Joined: Sat Feb 12, 2005 11:00 pm
Location: Maidenhead berkshire

Post Sun Jan 08, 2006 4:27 pm

Excellent stuff!!!! Keep up the good work


Mason
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Mon Jan 09, 2006 1:07 pm

looks like fun :cool:

P.S i'd have kept the 530d...
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
oneblueleg
E30 Zone Regular
E30 Zone Regular
Posts: 483
Joined: Sun Jan 16, 2005 11:00 pm
Location: Hampshire

Post Mon Jan 09, 2006 1:40 pm

How much weight is saved by removing this wiring, and what does that equate to on the track?
User avatar
chaosss
E30 Zone Newbie
E30 Zone Newbie
Posts: 79
Joined: Fri May 06, 2005 11:00 pm

Post Mon Jan 09, 2006 2:39 pm

Cheers for all the replies.
oneblueleg wrote:How much weight is saved by removing this wiring,
and what does that equate to on the track?
To be honest probably not that much weight is saved. I am talking in the region of 4/5 kg if I'm lucky but there are several reasons for doing it.

First of all this is the first car I've had where I have really started doing things for myself. So it is a learning process for me.

Also I enjoy tinkering with the car so that is worth it alone.

Part of the reason I am removing them as well is because I am removing lots of trim and accessories you end up with a lot of connectors lying about. By removnig these and all the associated wiring there is less chance of a short circuit and hence fire 8O (I am a little paranoid about fire but thats a personal thing). The car has gone too far now to ever return to stock so it doesn't matter.

Another reason is having stripped out the carpets the loom for the windows etc runs across the car and is messy and sometimes my feet caught in it. That is where the wiring removal all started and I figured I may as well carry on (a lot for my own benefit)

Removing the wiring will make it easier in the future if I decide to go to town. I might end up moving the fuse box inside the car to make it more accessible (or just for fun). I have an FIA cut off switch to go in the car as well which will be fitted when I relocate the battery to the boot.

In terms of time on track it will essentially equate to bugger all :D But I enjoy it and I enjoy the challenge of doing it and making it work. Also its a free mod which I (and more importantly she who holds the purse strings) like.
Jhonno wrote:P.S i'd have kept the 530d...
There is no doubt at all that the 530 was a fantastic car. But I found it very boring. The reason I bought is that I commute 100 miles a day to work and back and thought it would be economical. It wasn't that great (averaging just over 30) although I put that down to my driving.

I change cars a lot anyway and having had 3 e36's previously (318ti compact and 2 328's) I wanted something different. My plan was to get an M3 but my wife never wanted one and always liked the Z3's. So I agreed to get one as long as it was a 2.8. Now I have a company car anyway the Z3 is hers so a good solution all round.

And in all honesty the more I drive it the more I like it (LSD as standard)
oneblueleg
E30 Zone Regular
E30 Zone Regular
Posts: 483
Joined: Sun Jan 16, 2005 11:00 pm
Location: Hampshire

Post Mon Jan 09, 2006 2:49 pm

Excellent response, thanks for that... I'm enjoying this thread now and hope you keep it up. You've made it all sound pretty enthralling.
E30Mark
E30 Zone Team Member
E30 Zone Team Member
Posts: 8107
Joined: Sun Jan 09, 2005 11:00 pm
Location: Wimborne, Dorset

Post Mon Jan 09, 2006 4:23 pm

Couple of Q's for you, this 318iS looked like a quite well spec'd car... It looks like it had climate control fitted (numbers around the temperature dial) any chance it's for sale? i fancy fitting it to mine!

Also did you have en electric sunroof? if so do you still have the overhead panel that housed the sun visors etc, again i want one!

Have fun, i take it by now that you have realised half the wiring in the E30 does a complete loop of the car before it ever gets to its destination...
1 & 2 bed flats in Bournemouth areas, with parking
PM for details
oneblueleg
E30 Zone Regular
E30 Zone Regular
Posts: 483
Joined: Sun Jan 16, 2005 11:00 pm
Location: Hampshire

Post Mon Jan 09, 2006 4:28 pm

E30Mark wrote:
Also did you have en electric sunroof? ...
Have another look at the pictures Mark..... clue... you don't have to be Sherlock Holmes.... :D
E30Mark
E30 Zone Team Member
E30 Zone Team Member
Posts: 8107
Joined: Sun Jan 09, 2005 11:00 pm
Location: Wimborne, Dorset

Post Mon Jan 09, 2006 4:32 pm

oneblueleg wrote:
E30Mark wrote:
Also did you have en electric sunroof? ...
Have another look at the pictures Mark..... clue... you don't have to be Sherlock Holmes.... :D
Ok Ok, I'm stupid, i even looked at that picture earlier, it's just i thought i had seen a sunroof motor in one of the other pics, but i guess now it's a window motor.
1 & 2 bed flats in Bournemouth areas, with parking
PM for details
User avatar
chaosss
E30 Zone Newbie
E30 Zone Newbie
Posts: 79
Joined: Fri May 06, 2005 11:00 pm

Post Mon Jan 09, 2006 5:56 pm

E30Mark wrote:Couple of Q's for you, this 318iS looked like a quite well spec'd car... It looks like it had climate control fitted (numbers around the temperature dial) any chance it's for sale? i fancy fitting it to mine!

Also did you have en electric sunroof? if so do you still have the overhead panel that housed the sun visors etc, again i want one!

Have fun, i take it by now that you have realised half the wiring in the E30 does a complete loop of the car before it ever gets to its destination...
The numbers around the dial confused me as well.I assume the dial has been replaced at some point as there is no air con button or anything.

No sunroof (as you've probably gathered) :D :D :D

As for the wiring I am still tracing it. I started at the door and am still following that one round at the moment (removed everything I think just got to trace the remainder of the interior light circuit back round). Unfortunately I don't have a garage so I don't get to work on it during the week so progress is slow.
User avatar
stevetigger
E30 Zone Addict
E30 Zone Addict
Posts: 4659
Joined: Thu Feb 24, 2005 11:00 pm

Post Mon Jan 09, 2006 6:22 pm

I see a double garage in them photo's
User avatar
chaosss
E30 Zone Newbie
E30 Zone Newbie
Posts: 79
Joined: Fri May 06, 2005 11:00 pm

Post Sat Feb 04, 2006 4:14 pm

4/2/06

Been a while since an update but today was the first chance I got to do anything.

Priorities have slightly changed as I just sold my house and have to be out in 4 weeks so need to make sure she runs so I can at least move it.

So started off finishing the wiring I did last time. Every get the feeling you are in over your head :oops:

But finished the bit I was doing and thought I may as well see what happens. Had visions of it never running again. Connected the battery and she only started first time!!! :shock: WINNERS!!

Suddenly all the love rushed back :D :D Moved her back and forward a few times just to release the handbrake and stop stuff seizing.

Then removed a bit of sound deadening from the dash (still got a few bits to do)

Image

Then remembered I had a battery cable for relocating to the boot. This will be a 2 stage process due to time as I have a cut off switch to install as well but won't have time.

So got the cable through the bulk head and connected the block from a six cyclinder car:

Image

Image

Any comments on what I have done here, especially safety wise, would be greatly appreciated. The cable isn't long enough to route back to the well in the boot but as I will be cutting it anyway another one will have to be sourced. Not sure what to do in the meantime about mounting the battey but I can always remove the block quickly if I have too.

Quick question. The smaller wire than runs along with the main battery cable I connected to the smaller wires on the battery clamp. I assume this is correct. I noticed there is another bolt on the block where it could go but what would be the point in this? It would then just run from battery positive to the block.

Also can someone post pictures of how the clamp on six cyclinder cars work and how they are mounted to the floor. I will be after one of these ASAP but will post in the wanted section as well.

That's all folks
User avatar
chaosss
E30 Zone Newbie
E30 Zone Newbie
Posts: 79
Joined: Fri May 06, 2005 11:00 pm

Post Sat Apr 29, 2006 3:10 pm

29/4/06

Right its been a while since any update here from me so here goes.

Got a new cut off switch ordered (FIA compliant) as the old one wasn't going to take account of alternator run-on etc. so risked damaging the electrics when I use it.

So the new one takes a feed from the ignition circuit, the main battery cable, and also sends any the alternator current through a resistor to ground when in the off position.

I spent absolutely ages (I mean days) fiddling around trying to work out what to do. In the end I re-routed another bit of cable from behind the dash to the old battery location under the bonnet and mounted new connectors inside the car behind the dash. Lovely jubbly you might say!!

Image

NO...you're wrong. Not lovely fcuking jubbly at all. Spent another couple of days cutting an alumunium panel to go on the dash. In the end it looked crap. So I ditched it. Luckily my brother in law is a yacht builder (builds for the Beckhams and such like) so he is getting me a new piece laser cut (which is what I should of done in the first place).

So I just connected everything back up and we were away again.

Then I properly mounted the battery in the boot. I ended up using a six cyclinder tray but I added two clamps (one on each side of the battery) as the battery I am using is smaller than the standard six one and I wanted no risk of it moving in the event of an accident. I also belt and braced it with another strap (probably overboard but its that fire paranoia kicking in again).

Image

Then maanged to get the dashboard back in so it was usable to drive over to my new house. Then it got shut up in the garage for a bit.

So thats sorted for the time being. Then I spent a bit of time just clearing out the old crap from in the car.

Next job was the remainder of the sound deadening. The rear seat looked like this when I left it:
Image

which I wasn't really happy with. So I spent ages (hours and hours and hours) cleaning it until I ended up with this:

Image

Much much better but now it means I have to do the rest of the car :(

Cleaned up the remainder of the headlining as well as it had loads of stick bits left on.

In the meantime I managed to pick up some new wheels for it as well for road use only(17" Borbet C's). They are not on yet as I have to get some spigot rings but here is a cheeky preview

Image

Then it was time to sort the front wing. Here you can see the problem:

Image

Now took the bumper off and the old wing off. Was looking at the bumper wondering whether to cut it down or not (ala 316) but at the moment decided not too.

Image
Image

Also sprayed the grills black :D

Also took my roll cage back out as I wasn't happy with the quality of the welding on it. Got the neccessary brackets and stuff re-welded:

Image
Image

Much better :D


And the is the current state of the car. I am hoping to receive my door and wing back sprayed this week so will crack on with getting them back on.

I seem to have spent days (probably about 20) since my last update working on it but the progress seems to be slow at the moment. I seem to spend a lot of time taking the same old bits apart and putting them back together again (i.e. seats in, seats out, back in no out again) so a time of is wasted doing that. Also I am at the stage where all the ripping out is done so its the little bits left over.

Ah well its all fun. Problem is I haven't been out on track in it at all yet this year and time is ticking. My plan is that by the end of May it will all be ready (bar the coilovers which I hope to order soon)


And finally. Got my new trolley jack at last. My old one never fitted under the car so I had to jack it up using the crappy BMW jack first!!

New Sealey 3ton low entry jack arrived (lovely and low)

Image
Image
slowlysideways
E30 Zone Regular
E30 Zone Regular
Posts: 360
Joined: Mon Mar 27, 2006 11:00 pm
Location: Near Coventry

Post Sat Apr 29, 2006 6:28 pm

looking good!

where did you buy your rollcage from? and how much was it?

cheers!

do you get any problems with the police with having one of your "full beam" lenses out?
User avatar
chaosss
E30 Zone Newbie
E30 Zone Newbie
Posts: 79
Joined: Fri May 06, 2005 11:00 pm

Post Sat Apr 29, 2006 7:42 pm

I bought the rollcage from Demon Tweeks. It is the OMP bolt in cage with the door bars. It cost about £500

Some welding is required though to mount the brackets for the door bars.

I haven't had any problems yet although I rarely drive the car (only covered about 2k miles last year)
dodgem
E30 Zone Newbie
E30 Zone Newbie
Posts: 212
Joined: Mon Apr 24, 2006 11:00 pm
Location: Trowbridge, Wiltshire

Post Sun Apr 30, 2006 10:09 am

Looking like an awsome project there!

I can totally understand you wanting to strip everything properly simply from the point of getting to really know your car. It's a great feeling when you've done so much work yourself to know that underneath any exterior coverings, everything is spot on and not botched at all :wink:
oneblueleg
E30 Zone Regular
E30 Zone Regular
Posts: 483
Joined: Sun Jan 16, 2005 11:00 pm
Location: Hampshire

Post Tue May 02, 2006 9:06 am

Great, keep up the good work....
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Tue May 02, 2006 11:37 am

needs a polish now dude :wink:

and to ditch the avon hedgefinders on the new wheels..
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
User avatar
chaosss
E30 Zone Newbie
E30 Zone Newbie
Posts: 79
Joined: Fri May 06, 2005 11:00 pm

Post Sat May 13, 2006 6:09 pm

Right so carried on stripping the front of the car and cleaning it all up

Image

Then started with the hammerite. These are taken half way through so more coats were put on top.

Obviously it doesn't look like a spray job but then it isn't meant too. This is still a budget car and having the inside sprayed is not in the budget.

Image
Image

Then managed to find an LSD which I bought thinking it was a 3.91 but it turns out to be a 4.1 :D :D :D

Then a mad rush as I needed to get the car moving. Got the spigot rings so the new wheels finally went on. Then after work with a hangover on Friday fitted:

Doors, front wings, bumper, wheels, seat base and slidy mount, seat, harness mounts and one of the harnesses, and reconnected the internal wiring loom. So I finally got to drive it again!!!

Hopefully I will refit the roll cage this week so more updates then.
slowlysideways
E30 Zone Regular
E30 Zone Regular
Posts: 360
Joined: Mon Mar 27, 2006 11:00 pm
Location: Near Coventry

Post Sat May 13, 2006 11:54 pm

looking good mate!

the inside of yours looks so clean and bare compared to mine 8O mine has lots of wires running across base of front footwells?

for a little more weight loss - knock out the ski hatch with a lump hammer, a few kilos to be saved there!

good find on the 4.1! i had to settle for 3.64

i'm removing the sound deadning out of mine tomorrow, heat gun and chisel at the ready (what did you use in the end to remove the bitomen guey stuff? petrol?)

also - can you take some close up pictures of your bonnet pins please, both on your slam panel, and the bonnet itself - would be much apprecaited!
hammoj28
E30 Zone Addict
E30 Zone Addict
Posts: 3310
Joined: Tue Jan 25, 2005 11:00 pm
Location: Aberdeenshire.

Post Sun May 14, 2006 12:44 pm

This is looking dam good! Very interesting thread mate. :D
Image
24v tech2
User avatar
chaosss
E30 Zone Newbie
E30 Zone Newbie
Posts: 79
Joined: Fri May 06, 2005 11:00 pm

Post Mon May 15, 2006 7:23 pm

cheers for the replies.

@slowlysideways

Will look at the ski hatch.

I used cellulose paint thinners to remove all the crap afterwards. Hard work but worth it.

As for the pins I will take some more photos soon. There are ready made holes in the slam panel you can use but I didn't. I thought the pins wouldn't be long enough in those holes so made my own but it turns out they will be.

As for mounting on the bonnet this was a bit of a ball ache as well. Where my pins go through the bonnet is double skinned so I had to peel away a bit of the internal skin to allow me ot get the bolts on. It looks a bit of a mess underneath but lessons learnt.