First off:
There were no washer/pins holding on the old links
Parts 8 and 9 in pic here
http://www.realoem.com/bmw/showparts.do ... g=33&fg=45
Should there have been or is the ETK wrong?
The old links obviously stayed on fine without for the last 2 years I've had the car, and there appear to be no holes for the pins in the new parts.
Secondly:
Trying to push the new link on the anti roll bar, but not having any luck.
I've warmed the inside rubber bushing in some hot water, and put a bit of grease on the bar, but so far not getting anywhere
Any tips?



