It sounds interesting it looks like the posterior hub of the z3 can be used in the e30
E30 rear hub and bearing http://www.realoem.com/bmw/showparts.do ... g=33&fg=40
Z3 2.0 rear hub and bearing http://www.realoem.com/bmw/showparts.do ... g=33&fg=40
coments?
4 to 5 lugs
Moderator: martauto
1991 325 cabio t/c 3.2 evo, 6speed, e36m3 rack, adj bilstein,
http://s241.photobucket.com/albums/ff262/granitsas/
http://s241.photobucket.com/albums/ff262/granitsas/
Yup, this has been looked at before. The E36 rear hub is also a possibility as is the E30 M3 hub, as they mostly all use the same bearing - just needs someone to try it out.
You will need to redrill the 4 stud rear discs to 5 stud to keep the original rear brakes, but thats not a big deal to do.
You will need to redrill the 4 stud rear discs to 5 stud to keep the original rear brakes, but thats not a big deal to do.
James
'91 325i Sport
'93 318i touring 16v
'91 325i Sport
'93 318i touring 16v
I dont know about the front hubs but a braker here in greece tells me that he can fit the e36 front and rear hubs with the e36 brakes etc. Iplan to go for the whole conversion next october (m3 s50) In the meantime the site to visit is:http://www.realoem.com/bmw/ but no exact info. about the front
1991 325 cabio t/c 3.2 evo, 6speed, e36m3 rack, adj bilstein,
http://s241.photobucket.com/albums/ff262/granitsas/
http://s241.photobucket.com/albums/ff262/granitsas/
can you be more specific? what do you mean right parts?
1991 325 cabio t/c 3.2 evo, 6speed, e36m3 rack, adj bilstein,
http://s241.photobucket.com/albums/ff262/granitsas/
http://s241.photobucket.com/albums/ff262/granitsas/
- NICKE30CAB
- E30 Zone Newbie
- Posts: 83
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: portsmouth
- Contact:
in my personal opinion the only correct way to do this on the front is to use e30 m3 parts, i managed to find both front legs and rear traing arms for less than £250, at least you know your not fcuk!*g around with the cars geometry that way.
But as for the rear, the bearings are the same as the e30 m3 and z3 so in theroy you could just use e30 m3 or z3 hub flanges (i also belive that e28 hub flanges will fit)
But as for the rear, the bearings are the same as the e30 m3 and z3 so in theroy you could just use e30 m3 or z3 hub flanges (i also belive that e28 hub flanges will fit)

- NICKE30CAB
- E30 Zone Newbie
- Posts: 83
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: portsmouth
- Contact:
