Washer Non return valve

[Cypriotgeeza]

Good afternoon

I am after a price for the non return valve for the washer jets please.

Washer1.jpg

washer2.jpg

Hope everyone has a good bank holiday weekend!

Thanks

[onthames]

I've been after one too mate. Couldn't find one anywhere. I've just ordered these: https://www.ebay.co.uk/itm/264127728530 ... 2749.l2649
Will let you know if works!

[onthames]

I tried some other ebay ones. The pump didn't have enough pressure to open the valve. In the end I just used a T connector (not a valve) to tide me over until I can get one that works. If you need one urgently you could do that.

[Cypriotgeeza]

I've been after one too mate. Couldn't find one anywhere. I've just ordered these: https://www.ebay.co.uk/itm/264127728530 ... 2749.l2649
Will let you know if works!

Cheers mate!

Yea I was thinking of a T piece but heard that it doesn't build up pressure etc so I thought I'd just see how much the real thing is..if it's not too crazy I might aswell replace it..the one on there looks original

[onthames]

I've been after one too mate. Couldn't find one anywhere. I've just ordered these: https://www.ebay.co.uk/itm/264127728530 ... 2749.l2649
Will let you know if works!

Cheers mate!

Yea I was thinking of a T piece but heard that it doesn't build up pressure etc so I thought I'd just see how much the real thing is..if it's not too crazy I might aswell replace it..the one on there looks original

I asked cotswold last week and they had no stock, said no stock anywhere either, which so far I've found is true, even the breakers I've gone go haven't had any! Maybe they're in stock now though so give it a go!

[Cotswoldbmw]

Hello Everyone

I am sorry to say the stock situation has not improved and there currently isnt any stock
anywhere in the world and no date indicating when new stock will arrive.

Regards

Jon

[Cypriotgeeza]

Hello Everyone

I am sorry to say the stock situation has not improved and there currently isnt any stock
anywhere in the world and no date indicating when new stock will arrive.

Regards

Jon

Thanks Jon!

[Cypriotgeeza]

I've been after one too mate. Couldn't find one anywhere. I've just ordered these: https://www.ebay.co.uk/itm/264127728530 ... 2749.l2649
Will let you know if works!

Have you received your one yet mate?

https://www.ebay.co.uk/itm/324169959347 ... SwXedewnPc

I was thinkin of trying that one as its technically still Bmw so it should work as good as the original..

[onthames]

I've been after one too mate. Couldn't find one anywhere. I've just ordered these: https://www.ebay.co.uk/itm/264127728530 ... 2749.l2649
Will let you know if works!

Have you received your one yet mate?

https://www.ebay.co.uk/itm/324169959347 ... SwXedewnPc

I was thinkin of trying that one as its technically still Bmw so it should work as good as the original..

Yep, will try tomorrow morning, gotta pluck up the courage cos it's such an annoying job, will let you know.

[Cypriotgeeza]

I've been after one too mate. Couldn't find one anywhere. I've just ordered these: https://www.ebay.co.uk/itm/264127728530 ... 2749.l2649
Will let you know if works!

Have you received your one yet mate?

https://www.ebay.co.uk/itm/324169959347 ... SwXedewnPc

I was thinkin of trying that one as its technically still Bmw so it should work as good as the original..

Yep, will try tomorrow morning, gotta pluck up the courage cos it's such an annoying job, will let you know.

Thanks man! I appreciate it!

[onthames]

Have you received your one yet mate?

https://www.ebay.co.uk/itm/324169959347 ... SwXedewnPc

I was thinkin of trying that one as its technically still Bmw so it should work as good as the original..

Yep, will try tomorrow morning, gotta pluck up the courage cos it's such an annoying job, will let you know.

Thanks man! I appreciate it!

I gave it a quick go. Doesn't work, not enough pressure to open the valve, also the nozzles are too small to fit the tube snugly, but some electrical tape wrapped round and zip ties seemed to fix that. I took out 1/4 of the spring inside the valve to see if that reduces the pressure required to open it. Will try tomorrow and let you know.

PXL_20210602_201718291.jpg

PXL_20210602_195817252.jpg

PXL_20210602_201718291.jpg

[Cypriotgeeza]

I gave it a quick go. Doesn't work, not enough pressure to open the valve, also the nozzles are too small to fit the tube snugly, but some electrical tape wrapped round and zip ties seemed to fix that. I took out 1/4 of the spring inside the valve to see if that reduces the pressure required to open it. Will try tomorrow and let you know.PXL_20210602_201718291.jpg
PXL_20210602_195817252.jpg
PXL_20210602_201718291.jpg

Legend!

I'm considering getting that Mini one as its prob going to be the closest to OEM that i can find i reckon..

Ill wait to see what results you have first!

[onthames]

I gave it a quick go. Doesn't work, not enough pressure to open the valve, also the nozzles are too small to fit the tube snugly, but some electrical tape wrapped round and zip ties seemed to fix that. I took out 1/4 of the spring inside the valve to see if that reduces the pressure required to open it. Will try tomorrow and let you know.PXL_20210602_201718291.jpg
PXL_20210602_195817252.jpg
PXL_20210602_201718291.jpg

Legend!

I'm considering getting that Mini one as its prob going to be the closest to OEM that i can find i reckon..

Ill wait to see what results you have first!

I'd just go for it mate . I've tried another one too and not enough pressure to open valve. But when I run the washers using a non valve t splitter the pressure is strong so it's not that. I say you order that one cos mine is requiring quite a bit of bodging

[Cypriotgeeza]

I'll be in touch mate

[onthames]

I'll be in touch mate

Depending on how long your hoses are you may want some of these too, the OEM valve is quite a bit bigger and my hoses barely reached it so the new ones required extension. I used https://www.ebay.co.uk/itm/283886045936

[Cotswoldbmw]

Unfortunately these are still on a world-wide back order.

[Cypriotgeeza]

Unfortunately these are still on a world-wide back order.

No worries man, thanks for taking the time to check and get back to me!

[Cotswoldbmw]

I will post something on the forum if they become available.

Regards

Jon