Consolidated E30 Dismantling Thread - 316i to 325i Sport & M3...
Moderator: martauto
Yes, if you still need them.
Whoops. yes, got a box full of them!
Have you got a Z3 steering rack please?
- vonmarshall
- E30 Zone Newbie
- Posts: 48
- Joined: Sun Apr 06, 2014 11:00 pm
Hello
Do you have a rear LH light for 1984-1990 E30? Part # 63211368823. One that looks like this...
Do you have a rear LH light for 1984-1990 E30? Part # 63211368823. One that looks like this...
Hi, have you by chance got any brake pedal return springs knocking around? My brake pedal doesnt fully return quite often meaning the brake lights stick on. I've seen on RealOEM there is a spring installed on some E30s... mine has the slots but no spring present.
Cheers
Joe
Cheers
Joe
-
- E30 Zone Newbie
- Posts: 58
- Joined: Wed Nov 28, 2018 9:29 pm
Hi, do you have rear left and right bumper brackets?
41351971597 and 41351971598
41351971597 and 41351971598
-
- E30 Zone Regular
- Posts: 298
- Joined: Sun Aug 31, 2014 11:00 pm
I need a pair of rear bumper shock absorbers please
1989 Auto 325i cirrusblau metallic more door
1989 316i Atlantisblau more door
1987 Auto 525e ETA Saturnblau
1989 316i Atlantisblau more door
1987 Auto 525e ETA Saturnblau
We've no good rear bumper brackets available.
-
- E30 Zone Regular
- Posts: 298
- Joined: Sun Aug 31, 2014 11:00 pm
323i Clutch release bearing ?
1989 Auto 325i cirrusblau metallic more door
1989 316i Atlantisblau more door
1987 Auto 525e ETA Saturnblau
1989 316i Atlantisblau more door
1987 Auto 525e ETA Saturnblau
Nope. Best getting new if you can anyway.
- E30Loading
- E30 Zone Newbie
- Posts: 28
- Joined: Thu Jun 18, 2015 11:00 pm
Any LSD available?
Thanks
Thanks
Should have one 3,91 available from next week.
- E30Loading
- E30 Zone Newbie
- Posts: 28
- Joined: Thu Jun 18, 2015 11:00 pm
-
- E30 Zone Newbie
- Posts: 2
- Joined: Sat Jun 26, 2021 9:34 pm
Hi, looking for a fuel sender for a 1994 touring drivers side....do you have one 

-
- E30 Zone Newbie
- Posts: 5
- Joined: Thu Aug 26, 2021 4:22 am
I'm looking for a clutch pedal and a brake pedal for RHD E30.I'm not looking anywhere, so please.From Japan.
Can you send a photo of which parts you need as pedal could mean the whole system or just the rubber bit on the end.yukinotomo wrote: ↑Fri Aug 27, 2021 12:52 amI'm looking for a clutch pedal and a brake pedal for RHD E30.I'm not looking anywhere, so please.From Japan.
-
- E30 Zone Newbie
- Posts: 5
- Joined: Thu Aug 26, 2021 4:22 am
Thank you for your quick reply comment.
What I want is the red circle part of the attached file.
Parts No:3531 1152 805 clutch pedal
3521 1157 852 brake pedal
What I want is the red circle part of the attached file.
Parts No:3531 1152 805 clutch pedal
3521 1157 852 brake pedal
- Attachments
-
Hi. Is your car / your pedal box from a pre- or post- facelift car?yukinotomo wrote: ↑Fri Aug 27, 2021 12:52 amI'm looking for a clutch pedal and a brake pedal for RHD E30.I'm not looking anywhere, so please.From Japan.
I don't want this thread to disappear forever, and it's been 6 months in situ. So later I'll add a picture of an E30 we're working on.
It's being picked up from paint tonight.
It's being picked up from paint tonight.
Anybody have a 325i driveshaft? I was doing a rear disc conversion and for some reason one of my old driveshafts wouldn't go in the hub, so i swapped it for the one driveshaft that came with my rear disc trailing arms but of course, now it's thicker than the other one.
-
- E30 Zone Newbie
- Posts: 4
- Joined: Tue Jan 14, 2020 6:55 pm
Looking for some 15 Inch BBS alloys (4x100 ET24). Drop me a message if you have any available.
Never seen one of those sorry.
Yes we've got a few sets available.TomBarnes95 wrote: ↑Thu Jun 09, 2022 3:14 pmLooking for some 15 Inch BBS alloys (4x100 ET24). Drop me a message if you have any available.