Consolidated E30 Dismantling Thread - 316i to 325i Sport & M3...

Wed Nov 11, 2015 12:55 pm

I'm looking for a facelift front valance

Thu Nov 12, 2015 12:29 pm

We've got a couple of good ones but shipping is a nightmare - unless you're going to take on the risk of it getting bent.

Sat Nov 14, 2015 9:14 pm

Hello do you have any medium case diffs? If so could you please message me with price posted and ratios, LSD or open

Sat Nov 14, 2015 11:57 pm

Sun Nov 15, 2015 6:22 pm

Do you have a grey e34 headlining?

Mon Nov 16, 2015 11:51 am

Yep, plenty. Can't be posted though, but if it's surrounding parts your after that's no problem.

Tue Nov 17, 2015 10:18 am

Hi, I need a throttlebody for an M20B25 complete with TPS and coolant outlet.

Tue Nov 17, 2015 11:50 am

£48 inc post

Fri Nov 20, 2015 9:41 pm

Would you have in stock the metal backrest frame for the front BMW E30 Sports seats.
I am looking to buy 2 frames for the passengers seat (RHD) complete with the tilt mechanism, to suit a 2 door car.
The frames would need to be posted to Castle Hill NSW 2154, AUSTRALIA.
Cheers Gary.

Sat Nov 21, 2015 7:25 am

hlww kit?

Sat Nov 21, 2015 5:21 pm

Hi, have you got a driver's door central locking actuator?
If so, hm posted?
Thanks

Mon Nov 23, 2015 12:54 pm

image wrote:hlww kit?

Yes. Untested.

MrHugh wrote:Hi, have you got a driver's door central locking actuator?
If so, hm posted?
Thanks

What year?
Posted where?

Mon Nov 23, 2015 12:55 pm

A4Gary wrote:Would you have in stock the metal backrest frame for the front BMW E30 Sports seats.
I am looking to buy 2 frames for the passengers seat (RHD) complete with the tilt mechanism, to suit a 2 door car.
The frames would need to be posted to Castle Hill NSW 2154, AUSTRALIA.
Cheers Gary.

Two passenger seat back frames?

with the tilt mech off the base section?

Mon Nov 23, 2015 8:00 pm

Hi Will,

"Two passenger seat back frames?

with the tilt mech off the base section?"

Yes 2 passengers side backrest metal frames, the upper section only with longer lever on the left and shorter lever on the right not the base.
Would also like the drivers side seat back cover in black vinyl, the tilt lever on the right hand side.
Cheers Gary.

Tue Nov 24, 2015 10:31 am

PM me price for HLWW kit shipped to FK9 5AU

Thx

Tue Nov 24, 2015 10:56 am

I've pmed you sskoda

Thu Nov 26, 2015 7:27 am

A4Gary wrote:Hi Will,

"Two passenger seat back frames?

with the tilt mech off the base section?"

Yes 2 passengers side backrest metal frames, the upper section only with longer lever on the left and shorter lever on the right not the base.
Would also like the drivers side seat back cover in black vinyl, the tilt lever on the right hand side.
Cheers Gary.

All of that here Gary. Just got to strip the bolsters off and try to see what postage is like

Thu Nov 26, 2015 9:31 am

Hi Will,
Re the backrest metal frames, thank you.
Mate can I increase the drivers back rest covers to 2 in black vinyl in good condition, trying to upgrade some seats so they need to be good.
Cheers Gary.

Fri Nov 27, 2015 2:15 pm

Only have one black back cover.

Fri Nov 27, 2015 5:15 pm

Need the below for a 318 Touring. 1994 on an L.

Bonnet
Drivers Wing
Drivers headlight (smiley)
Valance
Bumper

Would save me a load of hassle if they could be Brilliant/Mugello Red.

Fri Nov 27, 2015 6:22 pm

do you have any towbars?

Fri Nov 27, 2015 9:10 pm

"Only have one black back cover."
I'll take that and the metal frames. Please let me know the costs.
Cheers Gary.

Fri Nov 27, 2015 10:33 pm

I'm after strut brace front and rear. Got any? Thanks

Sat Nov 28, 2015 9:57 pm

Can you look for a Touring Boot lid with no rust? Also the undertray underneath the steering wheel RHD too?

Mon Nov 30, 2015 1:25 pm

Waddock wrote:I'm after strut brace front and rear. Got any? Thanks

Got a front Sparco one, £50 delivered

j_drift wrote:do you have any towbars?

None at the minute sorry

Mon Nov 30, 2015 1:27 pm

Budgie325 wrote:Need the below for a 318 Touring. 1994 on an L.

Bonnet
Drivers Wing
Drivers headlight (smiley)
Valance
Bumper

Would save me a load of hassle if they could be Brilliant/Mugello Red.

Have all of it in brilliant but cannot post the bonnet and the valance would be risky enough as well.

Porthos wrote:Can you look for a Touring Boot lid with no rust? Also the undertray underneath the steering wheel RHD too?

Are you local? Tailgate would be collection only.

Wed Dec 02, 2015 8:25 am

sskoda wrote:
Waddock wrote:I'm after strut brace front and rear. Got any? Thanks

Got a front Sparco one, £50 delivered

Will, if the above strut brace is still for sale i will take it..pm me your bank details.

Regards

Gary

Sat Dec 05, 2015 2:28 am

PM sent Gary.

Sun Dec 06, 2015 11:38 am

Hi mate Im after a couple of things:

How much posted for these seals on BOTH sides? (Only if they are in very good condition)

Also how much for this wiring cover posted?

Also do you have the horse shoe gas struts in working condition? If so how much posted?

Thanks mate!

Mon Dec 07, 2015 9:53 am

How much for a complete E30 325i propshaft?

Mon Dec 07, 2015 1:58 pm

Cypriotgeeza wrote:Hi mate Im after a couple of things:

How much posted for these seals on BOTH sides? (Only if they are in very good condition)

Thanks mate!

Do they need to be shadowline?

£89 including shipping for 325i Prop

Mon Dec 07, 2015 1:59 pm

sskoda wrote:
Cypriotgeeza wrote:Hi mate Im after a couple of things:

How much posted for these seals on BOTH sides? (Only if they are in very good condition)

Thanks mate!
Do they need to be shadowline?

Yea please mate

Fri Dec 11, 2015 5:59 am

Cypriotgeeza wrote: Yea please mate

Ok can't help at all on any of those then.

Fri Dec 11, 2015 12:04 pm

sskoda wrote:
Cypriotgeeza wrote: Yea please mate
Ok can't help at all on any of those then.

Thanks anyway

Fri Dec 11, 2015 3:57 pm

hi i'm looking for a m30b35 afm do you have any left?