Consolidated E30 Dismantling Thread - 316i to 325i Sport & M3...
Moderator: martauto
-
E30drifto
- E30 Zone Newbie

- Posts: 152
- Joined: Wed Dec 26, 2007 11:00 pm
I'm looking for a facelift front valance
-
sskoda
We've got a couple of good ones but shipping is a nightmare - unless you're going to take on the risk of it getting bent.
-
ferndaleluke
- E30 Zone Newbie

- Posts: 9
- Joined: Mon Mar 16, 2015 11:00 pm
Hello do you have any medium case diffs? If so could you please message me with price posted and ratios, LSD or open
-
jonb
- E30 Zone Addict

- Posts: 3732
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: bristol
Do you have a grey e34 headlining?
-
sskoda
Yep, plenty. Can't be posted though, but if it's surrounding parts your after that's no problem.
-
mrabody
- E30 Zone Newbie

- Posts: 11
- Joined: Sun Jul 15, 2012 11:00 pm
- Location: Ilminster, Somerset
Hi, I need a throttlebody for an M20B25 complete with TPS and coolant outlet.
-
A4Gary
- E30 Zone Newbie

- Posts: 67
- Joined: Wed Feb 02, 2011 11:00 pm
- Location: Sunshine Coast Queensland, Australia
Would you have in stock the metal backrest frame for the front BMW E30 Sports seats.
I am looking to buy 2 frames for the passengers seat (RHD) complete with the tilt mechanism, to suit a 2 door car.
The frames would need to be posted to Castle Hill NSW 2154, AUSTRALIA.
Cheers Gary.
I am looking to buy 2 frames for the passengers seat (RHD) complete with the tilt mechanism, to suit a 2 door car.
The frames would need to be posted to Castle Hill NSW 2154, AUSTRALIA.
Cheers Gary.
-
MrHugh
- E30 Zone Newbie

- Posts: 2
- Joined: Wed Aug 06, 2014 11:00 pm
Hi, have you got a driver's door central locking actuator?
If so, hm posted?
Thanks
If so, hm posted?
Thanks
-
sskoda
Yes. Untested.image wrote:hlww kit?
What year?MrHugh wrote:Hi, have you got a driver's door central locking actuator?
If so, hm posted?
Thanks
Posted where?
-
sskoda
Two passenger seat back frames?A4Gary wrote:Would you have in stock the metal backrest frame for the front BMW E30 Sports seats.
I am looking to buy 2 frames for the passengers seat (RHD) complete with the tilt mechanism, to suit a 2 door car.
The frames would need to be posted to Castle Hill NSW 2154, AUSTRALIA.
Cheers Gary.
with the tilt mech off the base section?
-
A4Gary
- E30 Zone Newbie

- Posts: 67
- Joined: Wed Feb 02, 2011 11:00 pm
- Location: Sunshine Coast Queensland, Australia
Hi Will,
"Two passenger seat back frames?
with the tilt mech off the base section?"
Yes 2 passengers side backrest metal frames, the upper section only with longer lever on the left and shorter lever on the right not the base.
Would also like the drivers side seat back cover in black vinyl, the tilt lever on the right hand side.
Cheers Gary.
"Two passenger seat back frames?
with the tilt mech off the base section?"
Yes 2 passengers side backrest metal frames, the upper section only with longer lever on the left and shorter lever on the right not the base.
Would also like the drivers side seat back cover in black vinyl, the tilt lever on the right hand side.
Cheers Gary.
-
image
- E30 Zone Newbie

- Posts: 229
- Joined: Thu Jan 21, 2010 11:00 pm
- Location: Latvia
PM me price for HLWW kit shipped to FK9 5AU
Thx
Thx
-
sskoda
All of that here Gary. Just got to strip the bolsters off and try to see what postage is likeA4Gary wrote:Hi Will,
"Two passenger seat back frames?
with the tilt mech off the base section?"
Yes 2 passengers side backrest metal frames, the upper section only with longer lever on the left and shorter lever on the right not the base.
Would also like the drivers side seat back cover in black vinyl, the tilt lever on the right hand side.
Cheers Gary.
-
A4Gary
- E30 Zone Newbie

- Posts: 67
- Joined: Wed Feb 02, 2011 11:00 pm
- Location: Sunshine Coast Queensland, Australia
Hi Will,
Re the backrest metal frames, thank you.
Mate can I increase the drivers back rest covers to 2 in black vinyl in good condition, trying to upgrade some seats so they need to be good.
Cheers Gary.
Re the backrest metal frames, thank you.
Mate can I increase the drivers back rest covers to 2 in black vinyl in good condition, trying to upgrade some seats so they need to be good.
Cheers Gary.
-
Budgie325
- E30 Zone Newbie

- Posts: 165
- Joined: Tue Nov 20, 2012 11:00 pm
- Location: Surrey
Need the below for a 318 Touring. 1994 on an L.
Bonnet
Drivers Wing
Drivers headlight (smiley)
Valance
Bumper
Would save me a load of hassle if they could be Brilliant/Mugello Red.
Bonnet
Drivers Wing
Drivers headlight (smiley)
Valance
Bumper
Would save me a load of hassle if they could be Brilliant/Mugello Red.
-
A4Gary
- E30 Zone Newbie

- Posts: 67
- Joined: Wed Feb 02, 2011 11:00 pm
- Location: Sunshine Coast Queensland, Australia
"Only have one black back cover."
I'll take that and the metal frames. Please let me know the costs.
Cheers Gary.
I'll take that and the metal frames. Please let me know the costs.
Cheers Gary.
-
Waddock
- E30 Zone Newbie

- Posts: 18
- Joined: Wed Nov 25, 2015 11:00 pm
I'm after strut brace front and rear. Got any? Thanks
-
Porthos
- E30 Zone Newbie

- Posts: 25
- Joined: Fri Nov 27, 2015 11:00 pm
Can you look for a Touring Boot lid with no rust? Also the undertray underneath the steering wheel RHD too?
-
sskoda
Got a front Sparco one, £50 deliveredWaddock wrote:I'm after strut brace front and rear. Got any? Thanks
None at the minute sorryj_drift wrote:do you have any towbars?
-
sskoda
Have all of it in brilliant but cannot post the bonnet and the valance would be risky enough as well.Budgie325 wrote:Need the below for a 318 Touring. 1994 on an L.
Bonnet
Drivers Wing
Drivers headlight (smiley)
Valance
Bumper
Would save me a load of hassle if they could be Brilliant/Mugello Red.
Are you local? Tailgate would be collection only.Porthos wrote:Can you look for a Touring Boot lid with no rust? Also the undertray underneath the steering wheel RHD too?
-
aimlessrock
- E30 Zone Squatter

- Posts: 1821
- Joined: Sun Dec 06, 2009 11:00 pm
- Location: Manchester
Got a front Sparco one, £50 deliveredsskoda wrote:Waddock wrote:I'm after strut brace front and rear. Got any? Thanks
Will, if the above strut brace is still for sale i will take it..pm me your bank details.
Regards
Gary
E30 320i Convertible (1989)
190 Mercedes (1988)
"there is nothing more expensive than a cheap E30"
190 Mercedes (1988)
"there is nothing more expensive than a cheap E30"
-
Cypriotgeeza
- E30 Zone Addict

- Posts: 3046
- Joined: Sat Apr 04, 2009 11:00 pm
- Location: Under a bonnet somewhere..
Hi mate Im after a couple of things:
How much posted for these seals on BOTH sides? (Only if they are in very good condition)

Also how much for this wiring cover posted?

Also do you have the horse shoe gas struts in working condition? If so how much posted?

Thanks mate!
How much posted for these seals on BOTH sides? (Only if they are in very good condition)

Also how much for this wiring cover posted?

Also do you have the horse shoe gas struts in working condition? If so how much posted?

Thanks mate!
Check my M30 build threads:
Project Frankenstein: viewtopic.php?f=25&t=194154
Headgasket: viewtopic.php?f=55&t=165704
Clutch issues: viewtopic.php?f=55&t=172482
Instagram: www.instagram.com/Cypriotgeeza
Project Frankenstein: viewtopic.php?f=25&t=194154
Headgasket: viewtopic.php?f=55&t=165704
Clutch issues: viewtopic.php?f=55&t=172482
Instagram: www.instagram.com/Cypriotgeeza
-
yung-gun
- E30 Zone Regular

- Posts: 942
- Joined: Sat Feb 26, 2011 11:00 pm
- Location: Prestatyn, North Wales
-
sskoda
Do they need to be shadowline?Cypriotgeeza wrote:Hi mate Im after a couple of things:
How much posted for these seals on BOTH sides? (Only if they are in very good condition)
Thanks mate!
£89 including shipping for 325i Prop
-
Cypriotgeeza
- E30 Zone Addict

- Posts: 3046
- Joined: Sat Apr 04, 2009 11:00 pm
- Location: Under a bonnet somewhere..
Yea please matesskoda wrote:Do they need to be shadowline?Cypriotgeeza wrote:Hi mate Im after a couple of things:
How much posted for these seals on BOTH sides? (Only if they are in very good condition)
Thanks mate!
Check my M30 build threads:
Project Frankenstein: viewtopic.php?f=25&t=194154
Headgasket: viewtopic.php?f=55&t=165704
Clutch issues: viewtopic.php?f=55&t=172482
Instagram: www.instagram.com/Cypriotgeeza
Project Frankenstein: viewtopic.php?f=25&t=194154
Headgasket: viewtopic.php?f=55&t=165704
Clutch issues: viewtopic.php?f=55&t=172482
Instagram: www.instagram.com/Cypriotgeeza
-
Cypriotgeeza
- E30 Zone Addict

- Posts: 3046
- Joined: Sat Apr 04, 2009 11:00 pm
- Location: Under a bonnet somewhere..
Thanks anywaysskoda wrote:Ok can't help at all on any of those then.Cypriotgeeza wrote: Yea please mate
Check my M30 build threads:
Project Frankenstein: viewtopic.php?f=25&t=194154
Headgasket: viewtopic.php?f=55&t=165704
Clutch issues: viewtopic.php?f=55&t=172482
Instagram: www.instagram.com/Cypriotgeeza
Project Frankenstein: viewtopic.php?f=25&t=194154
Headgasket: viewtopic.php?f=55&t=165704
Clutch issues: viewtopic.php?f=55&t=172482
Instagram: www.instagram.com/Cypriotgeeza
-
demelle155
- E30 Zone Newbie

- Posts: 14
- Joined: Sat Nov 07, 2015 11:00 pm
hi i'm looking for a m30b35 afm do you have any left?

