Head touching roof of E30 tourer...... please help?

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
Jordanjames
E30 Zone Newbie
E30 Zone Newbie
Posts: 34
Joined: Sun Jan 11, 2015 11:00 pm

Post Tue Jan 27, 2015 7:43 am

Hi guys,

I am new to this game... just purchased an E30 316i tourer, a little under powered i know but an immaculate car.

The problem is my head is touching the roof with the seat fully down when i am in my upright sitting position.

Does anybody know a way around this??

*I AM 6FT

I have a long drive to Edinburgh at the weekend and dont fancy slouching all the way there!

Thanks

Jordan
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Tue Jan 27, 2015 9:51 am

Have you found the seat up-down adjustment/is it working? Push down the lever by the seat hinge.
User avatar
Jordanjames
E30 Zone Newbie
E30 Zone Newbie
Posts: 34
Joined: Sun Jan 11, 2015 11:00 pm

Post Tue Jan 27, 2015 11:19 am

Yes its fully down, i also checked the passenger side and its the same there.

I have a saloon that does not have a sunroof and i have no problems in this.

I understand the roof is slightly lower for the sunroof but there must be some way around this?
e30topless
E30 Zone Team Member
E30 Zone Team Member
Posts: 13595
Joined: Wed Aug 23, 2006 11:00 pm
Location: surrounded by scrap

Post Tue Jan 27, 2015 11:29 am

Theres no distance in non or sunroof roofs, one zoner kieran is 7ft tall or something he hasnt got a problem in his sunroof cars, it must be your seat adjustments ! :)
User avatar
Jordanjames
E30 Zone Newbie
E30 Zone Newbie
Posts: 34
Joined: Sun Jan 11, 2015 11:00 pm

Post Tue Jan 27, 2015 11:48 am

I will double check again but it seems odd that both passenger and drivers seat is the same.

The drivers seat is a spare from an old E30 i took apart.is there something i can do to set it to a minimum before i put it on, then when i put it on lower it further with the leaver?
RM2186
E30 Zone Addict
E30 Zone Addict
Posts: 4511
Joined: Sun Sep 18, 2005 11:00 pm
Location: Washington, Tyne & Wear

Post Tue Jan 27, 2015 5:02 pm

Don't suppose the Touring headlining has dropped by any chance? winkeye
1987 Tech1 325i Sport

Image
User avatar
gooner1
Out humping Reindeer
Posts: 13280
Joined: Fri Apr 14, 2006 11:00 pm
Location: Northampton.For my sins.

Post Tue Jan 27, 2015 5:44 pm

Liposuction? a˜€
Image
heathy325
E30 Zone Regular
E30 Zone Regular
Posts: 362
Joined: Fri Jan 20, 2006 11:00 pm
Location: Preston

Post Tue Jan 27, 2015 7:48 pm

Defo your seat as above I'm 6ft 6 and no problems in mine
Nobby_N
Old Skooler
Old Skooler
Posts: 3954
Joined: Sat Mar 24, 2007 11:00 pm
Location: Boston Lincs Mainly being a Coont

Post Tue Jan 27, 2015 8:07 pm

Recline the back of seat
User avatar
Jordanjames
E30 Zone Newbie
E30 Zone Newbie
Posts: 34
Joined: Sun Jan 11, 2015 11:00 pm

Post Wed Jan 28, 2015 12:53 pm

heathy325 wrote:Defo your seat as above I'm 6ft 6 and no problems in mine
Hi can I ask if you have the back of your seat upright??

I can not sit at an angle due to a pelvis injury

Thanks jordan
capri_rob
Married to the E30 Zone
Married to the E30 Zone
Posts: 9678
Joined: Tue Feb 19, 2008 11:00 pm
Location: South Staffordshire

Post Wed Jan 28, 2015 1:45 pm

I'm 6'3" and have no issues with height adjustment in my touring - also don't have the seat leaned that far back either.

As above it sounds like there is a problem with the height adjuster
Image

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
User avatar
Jordanjames
E30 Zone Newbie
E30 Zone Newbie
Posts: 34
Joined: Sun Jan 11, 2015 11:00 pm

Post Wed Jan 28, 2015 2:14 pm

Just had the car checked by a E30 enthusiast and the seat is fine. It has full height adjustment motion and is level with the passenger seat (which I also touch the roof in) However my friend is 6ft2 he sits in the car with half an inch clearance, I must have a really long body and or big head.

Is there any way of cutting something of the bottom of the seat and welding it back together but shorter?

thanks again!