Ok so i've used two drivers side e30 mounts with an e36 a/c rad, thing is it's only just touching the mounts on both sides using the stock e30 rubber feet.
I could probably find a work around but i'm confused as to why it doesn't fit properly.
Anyone know what's going on.
I'm also wondering what gearbox linkage bracket i need to be using, my car was originally a 318i auto, now it has an e36 ZF box.
Rad Feet & Gear linkage carrier
Moderator: martauto
-
rich318i
- E30 Zone Addict
- Posts: 2393
- Joined: Wed Oct 26, 2005 11:00 pm
- Location: Brands :) :)
the manual one im guessing.. the clue might be in the name
-
ashje
- E30 Zone Regular
- Posts: 265
- Joined: Mon Oct 28, 2013 11:00 pm
the manual e30 one will work with the e36 box and linkage?
-
dooce
- E30 Zone Regular
- Posts: 470
- Joined: Wed Apr 13, 2011 11:00 pm
- Location: PE14
If you are using the e36 ZF box, you need to use the linkage from that gearbox as well. Not an e30 one.
-
ashje
- E30 Zone Regular
- Posts: 265
- Joined: Mon Oct 28, 2013 11:00 pm
Yeah i'm using the e36 linkage there's just nothing on the car at the moment to attach it to.
Seams the standard one from a manual e30 will work just fine.
Seams the standard one from a manual e30 will work just fine.