Evening all,
I did have the instrument pack out at the weekend for the temp gauge nut check. However now coolant issue is sorted I have lost my instrument lights and digital clock? All gauges working fine and I have changed fuse 23 in the dark,even though the one in looked fine,still no joy.....
Thanks in advance.
Instrument lights and digital clock not working.....
Moderator: martauto
-
pac1982
- Engaged to the E30 Zone

- Posts: 5330
- Joined: Fri Mar 07, 2008 11:00 pm
- Location: isle of wight
are all your exterior lights working correctly?

1991 BMW E30 318i Neon Design Convertible (Sold)
1990 BMW E30 325i Touring (Sold)
1990 BMW E30 318IS (Sold)
1990 BMW E30 316i (RIP)
-
mineralblue
- Rocking Horse Poo
- Posts: 729
- Joined: Tue Jun 26, 2007 11:00 pm
- Location: Nottingham
Yes they are?
-
mineralblue
- Rocking Horse Poo
- Posts: 729
- Joined: Tue Jun 26, 2007 11:00 pm
- Location: Nottingham
Well I've taken it back out and disconnected reconnected everything,the digital clock now works but no lights on the instrument pack?
Help appreciated. The fuse is good.
Help appreciated. The fuse is good.
-
Fal_325i
- E30 Zone Camper

- Posts: 1261
- Joined: Sun May 21, 2006 11:00 pm
- Location: Bucks
Are you sure the interior lighting is not set to dim?, try twisting the light pull clockwise.
-
mineralblue
- Rocking Horse Poo
- Posts: 729
- Joined: Tue Jun 26, 2007 11:00 pm
- Location: Nottingham
Yep!
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
If the rest of the controls/instrument lighting is working (excluding headlamp/fog light switch panel), then either you have two dud bulbs in the cluster (use the correct wattage replacements!) or you have cracked the solder joints on the white socket at the back of the cluster, where the pins join the circuit board.
-
mineralblue
- Rocking Horse Poo
- Posts: 729
- Joined: Tue Jun 26, 2007 11:00 pm
- Location: Nottingham
Thank you sir,yes all other lights work. Could I have damaged 2 of the bulbs taking it out before? Also the solder joints? Are they inside the cluster and visible if damaged, canit be resoldered or new instrument pack required? Thanks for the help,electrics really are not my forte!
Strangely the oil warning light has now come on the over head panel once I put it all back together, oil level seems fine,albeit parked on a nose down slope?
Strangely the oil warning light has now come on the over head panel once I put it all back together, oil level seems fine,albeit parked on a nose down slope?
