Engine removal ?

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
shane281189
E30 Zone Newbie
E30 Zone Newbie
Posts: 111
Joined: Sat Apr 07, 2012 11:00 pm

Post Tue Jun 04, 2013 4:21 pm

Best way to remove 325i engine out the car . Out the top with engine crane or drop it out the bottom ?
Silverfang
E30 Zone Regular
E30 Zone Regular
Posts: 937
Joined: Fri Dec 23, 2005 11:00 pm
Location: Northampton

Post Tue Jun 04, 2013 4:45 pm

IT's tight but can be done going out the top. Best to elevate the rear of the car on axle stands, disconnect the prop-shaft and lift it with the box in one go.
BMW and Opel, both RWD, both german, both good fun
http://www.clockservicing.co.uk/ For any clock repairs try here.
Topblag
Old Skooler
Old Skooler
Posts: 7095
Joined: Wed Jul 30, 2008 11:00 pm
Location: Fife - You got a problem with that ?

Post Tue Jun 04, 2013 4:56 pm

Silverfang wrote:IT's tight but can be done going out the top. Best to elevate the rear of the car on axle stands, disconnect the prop-shaft and lift it with the box in one go.
Easiest is downwards with subframe, suspension and steering rack so you move it easier once it's out.

I'd recommend this for M20s with switchable auto boxes as they are longer and tighter to squeeze out of the engine bay without clattering off the front slam panel.

Manuals or 4 pots, take them out upwards. Keep the 4 pot on the hoist so it's easier to put it on a trailer and weigh it in for scrap. :D
1990 325i Cab auto in Alpine White II
1988 Alpina C2.5 moredoor in Black, 71k
1990 325ix, moredoor auto in Laser Blue. 51k
1984 Hartge H35 in Black
2004 996 C4S in Silver 43k manual
2006 Audi S6 V10 in Black 58k
User avatar
joeyb
E30 Zone Regular
E30 Zone Regular
Posts: 430
Joined: Mon Oct 31, 2011 11:00 pm
Location: Fareham, Hampshire

Post Tue Jun 04, 2013 5:09 pm

Real men go out the top. Thats what I learnt on the Vauxhall forums anyway lol
bmw9818
E30 Zone Addict
E30 Zone Addict
Posts: 2561
Joined: Tue Aug 11, 2009 11:00 pm
Location: Croydon

Post Tue Jun 04, 2013 8:09 pm

it is complicated getting the 2.5 back in from the top, you would need a balancing thing to shift the weight over,
User avatar
shane281189
E30 Zone Newbie
E30 Zone Newbie
Posts: 111
Joined: Sat Apr 07, 2012 11:00 pm

Post Tue Jun 04, 2013 9:52 pm

thanks out the top it goes