another find just sat there 323i rare BBS bodykit
Moderator: martauto
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
those are my plans for the next attempt + fuel check .i'll just splice into the pump live feed under the seat and give it 12v direct ,we'll sharp find out if the pump is still alive 

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
kangman
- E30 Zone Squatter

- Posts: 1935
- Joined: Mon May 24, 2010 11:00 pm
- Location: Heathrow
more detailed pics of this breaker 
MY FACEBOOK PAGE- CLASSIC STANCE
http://www.facebook.com/pages/Classic-S ... 6444884427
MY FOUR EYED BEAST
http://www.e30zone.net/modules.php?name ... highlight=
http://www.facebook.com/pages/Classic-S ... 6444884427
MY FOUR EYED BEAST
http://www.e30zone.net/modules.php?name ... highlight=
-
Kedge
- Old Skooler

- Posts: 7698
- Joined: Thu Jan 13, 2005 11:00 pm
- Location: Leicestershire
10 year old petrol is going to be useless, get some fresh in there! Hope you've not fucked the bores or anything else internal if you've just tried starting with no other prep work.
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
plugs out and oiled up the bores on weds gone then turned the crank with a spanner today before i hooked the battery but couldn't be arsed to type that earlier .
i've played with cars for over 20 yrs btw .
i've played with cars for over 20 yrs btw .

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
jonny323i
- Engaged to the E30 Zone

- Posts: 5428
- Joined: Mon Mar 14, 2005 11:00 pm
- Location: Stoke on trent
I have an old jettronic arm if you need one to bring it back to life
Touring for life
-
jonny323i
- Engaged to the E30 Zone

- Posts: 5428
- Joined: Mon Mar 14, 2005 11:00 pm
- Location: Stoke on trent
I have an old jettronic arm if you need one to bring it back to life
Touring for life
-
kangman
- E30 Zone Squatter

- Posts: 1935
- Joined: Mon May 24, 2010 11:00 pm
- Location: Heathrow
PM'd
MY FACEBOOK PAGE- CLASSIC STANCE
http://www.facebook.com/pages/Classic-S ... 6444884427
MY FOUR EYED BEAST
http://www.e30zone.net/modules.php?name ... highlight=
http://www.facebook.com/pages/Classic-S ... 6444884427
MY FOUR EYED BEAST
http://www.e30zone.net/modules.php?name ... highlight=
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
i removed the underdash panel this morning to check things are plugged in and to hook a live feed up from the ignition for the fuel pump.I found the foxgaurd immob on the back of the panel and a secret switch that i hope is a fuel pump cut off as this was a common practise back in the day up here in twoc central!

i'll have to try to start it again tomorrow as the day will be mostly taken up by fixing other peoples turds

i'll have to try to start it again tomorrow as the day will be mostly taken up by fixing other peoples turds

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
are the con rods/pistons from these any use for a stroker ?
i'm sure i've asked but can't find the post now
i'm sure i've asked but can't find the post now

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
Speedtouch
- Old Skooler

- Posts: 14125
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
The 323i crank has a longer stroke than the 325i one, so theoretically, you could use it to make a stroker:
http://www.e30zone.net/e30zonewiki/inde ... ding_a_2.7
I gather the 323i piston bore, cylinder head and conrods are the same as a 320i.
http://www.e30zone.net/e30zonewiki/inde ... ding_a_2.7
I gather the 323i piston bore, cylinder head and conrods are the same as a 320i.
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
-
BEERBOY123
- E30 Zone Squatter

- Posts: 1537
- Joined: Sat Jun 06, 2009 11:00 pm
SAVE IT!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Two headblenders, couple of bags of MC Hammer, 5 litres of FFF, a 48ft bastard, a box of jumped-up custard and some soggy chimps
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
it was last reported on it's way to china ,bon voyage 

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
jimbom30cab
- Tech 1 freak
- Posts: 7631
- Joined: Mon Oct 12, 2009 11:00 pm
- Location: in the garage
make much profit on that one Mick?
glad i saved the 3.46 diff
glad i saved the 3.46 diff
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
nah not a bean matejimbom30cab wrote:make much profit on that one Mick?
glad i saved the 3.46 diff

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
jimbom30cab
- Tech 1 freak
- Posts: 7631
- Joined: Mon Oct 12, 2009 11:00 pm
- Location: in the garage
top man 

