New tyres
Moderator: martauto
-
Kemlo
- E30 Zone Regular

- Posts: 342
- Joined: Tue Sep 25, 2007 11:00 pm
- Location: Birstall, West Yorkshire
-
Chris_B86
- E30 Zone Camper

- Posts: 1167
- Joined: Mon Jul 23, 2012 11:00 pm
I always thought it would be better to have them on the drive wheels, but from reading on here others opinions, it's better to have them on the front, as apparently worn fronts have quite a big effect on handling and feel in comparison to rears

1990 E30 325i Sport Sterling Silber
1999 E36 323i Sport Touring Techno Violet
-
Kemlo
- E30 Zone Regular

- Posts: 342
- Joined: Tue Sep 25, 2007 11:00 pm
- Location: Birstall, West Yorkshire
-
Chris_B86
- E30 Zone Camper

- Posts: 1167
- Joined: Mon Jul 23, 2012 11:00 pm
Yeah think it was Brian's post on something I read

1990 E30 325i Sport Sterling Silber
1999 E36 323i Sport Touring Techno Violet
-
FinalD
- E30 Zone Camper

- Posts: 1098
- Joined: Wed Apr 25, 2012 11:00 pm
- Location: Bristol
Everyone I speak to who is into cars and have been for years says new on the rear, always. This is for FWD and RWD.
1988 325i Cabriolet - Gone.
-
harry_p
- Engaged to the E30 Zone

- Posts: 5313
- Joined: Thu Oct 12, 2006 11:00 pm
- Location: norfolk
i don't think it makes the slightest bit of difference, just remember that whatever axel you put them on they may take quite a few miles to scrub in, so don't drive away from having them fitted like you stole it.
lots of cars have different size front and rear tyres making it impossible to always put the new ones on the back
lots of cars have different size front and rear tyres making it impossible to always put the new ones on the back
cheers,
harry
harry
-
Eddie25
- E30 Zone Newbie

- Posts: 37
- Joined: Fri Dec 29, 2006 11:00 pm
- Location: Gloucestershire
+1 when i worked for a main stealer we were actually advised to fit new tyres to the back. Their reasoning at the time was that understeer was less frightening and more controlable to the majority of drivers than oversteer.FinalD wrote:Everyone I speak to who is into cars and have been for years says new on the rear, always. This is for FWD and RWD.
We always thought it was a bit daft really but the instructions came straight from the manufacturer.
Rust is lighter than carbon fibre.
-
FinalD
- E30 Zone Camper

- Posts: 1098
- Joined: Wed Apr 25, 2012 11:00 pm
- Location: Bristol
This is the reason I've understood it to be as well, which makes sense. The general population don't know/aren't able to control things like oversteer so most cars are prone to understeer. Fitting tyres to keep the oversteer at bay is quite logical really.Eddie25 wrote:+1 when i worked for a main stealer we were actually advised to fit new tyres to the back. Their reasoning at the time was that understeer was less frightening and more controlable to the majority of drivers than oversteer.
We always thought it was a bit daft really but the instructions came straight from the manufacturer.
I know how to handle my cars, but even so I'd still rather have the newer, grippier rubber on the back as it kicking out when you're not expecting it isn't fun (fun when you provoke and do it on purpose mind).
1988 325i Cabriolet - Gone.
-
Morat
- E30 Zone Team Member

- Posts: 8943
- Joined: Thu Feb 09, 2006 11:00 pm
- Location: The Peoples Republic of Yorkshire
Personally, in a RWD car I put new tyres on the front so I have better steering. If the back lets go you can always use opposite lock.
When I had a Fiat Coupe (FWD) I always put the new tyres on the back because there's not a lot you can do if a FWD car lets go at the back.
ymmv
When I had a Fiat Coupe (FWD) I always put the new tyres on the back because there's not a lot you can do if a FWD car lets go at the back.
ymmv
E30 Touring 0.35 cD - more slippery than prison soap 

Praise the Lard... and pass the dripping!

Praise the Lard... and pass the dripping!
-
Kos
- E30 Zone Team Member

- Posts: 15448
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: London / Cyprus
Best advise I can give here would be to fit some decent tyres then worry about what axel you are going put them on to
Enjoy the ring
Enjoy the ring
-
FinalD
- E30 Zone Camper

- Posts: 1098
- Joined: Wed Apr 25, 2012 11:00 pm
- Location: Bristol
That is the main thing...and ensure they are on the same axel, not the same side.Kos wrote:Best advise I can give here would be to fit some decent tyres then worry about what axel you are going put them on to
1988 325i Cabriolet - Gone.
-
m8782538
- E30 Zone Squatter

- Posts: 1550
- Joined: Mon Feb 07, 2011 11:00 pm
- Location: Swindon
also check the requirement for driving abroad as i heard that in some countries all 4 tyres on a car must be the same make and model and as per manufacturer recommended. Anything other than that will mean a fine or your car being inpounded. Don't know if this is right or wrong.
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Another note, on nice smooth tarmac a tyre with deep tread grooves will not grip as much as a tyre with shallow tread grooves 
-
FinalD
- E30 Zone Camper

- Posts: 1098
- Joined: Wed Apr 25, 2012 11:00 pm
- Location: Bristol
So my spare set of alloys with bald tyres should grip really well...DanThe wrote:Another note, on nice smooth tarmac a tyre with deep tread grooves will not grip as much as a tyre with shallow tread grooves
1988 325i Cabriolet - Gone.
-
Motorhole
- E30 Zone Addict

- Posts: 2395
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: Cheshire
Certainly is - opposite lock and nail the throttleMorat wrote:because there's not a lot you can do if a FWD car lets go at the back.
-
Morat
- E30 Zone Team Member

- Posts: 8943
- Joined: Thu Feb 09, 2006 11:00 pm
- Location: The Peoples Republic of Yorkshire
All very well in theory, but Fiat Coupés were well known for not responding favourably to that sort of thing!Motorhole wrote:Certainly is - opposite lock and nail the throttleMorat wrote:because there's not a lot you can do if a FWD car lets go at the back.Counter-intuitive and scary when there's scenery approaching, but have faith and it'll do the job!
E30 Touring 0.35 cD - more slippery than prison soap 

Praise the Lard... and pass the dripping!

Praise the Lard... and pass the dripping!
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
It's definitely a requirement in France, but I wouldn't expect any problems with a GB registered car.m8782538 wrote:also check the requirement for driving abroad as i heard that in some countries all 4 tyres on a car must be the same make and model and as per manufacturer recommended. Anything other than that will mean a fine or your car being inpounded. Don't know if this is right or wrong.
Don't know if it applies in Germany or not, but they do have a six year limit on the age of your tyres.
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
I always fit new tyres to the front,let them wear to around 3mm,then put them aside for rear axle use.
I find that worn front tyres on E30 will tramline and aquaplane,not really an issue if the worn tyres are on the rear!
Snag is,I have a pile of 'rear axle only' wheels/tyres,and no spare wheels to have new tyres fitted to!
I find that worn front tyres on E30 will tramline and aquaplane,not really an issue if the worn tyres are on the rear!
Snag is,I have a pile of 'rear axle only' wheels/tyres,and no spare wheels to have new tyres fitted to!
Youth is wasted on the young.
-
goosiegander
- Zonegoose
- Posts: 2544
- Joined: Sun Nov 19, 2006 11:00 pm
- Location: East Anglia
Just had 4 Toyo proxes' delivered for fitting tomorrow, what day you off to the ring? I'm heading over on saturday!Kemlo wrote:I have an advisory on the MOT for a cracked tyre - I'm about to go to the ring, so I will be replacing the tyres on that axle to be on the safe side.
Am I best to have the new tyres on the rear or the front? The existing tyres are nothing special, but they have plenty of tread.
Thanks
-
Kemlo
- E30 Zone Regular

- Posts: 342
- Joined: Tue Sep 25, 2007 11:00 pm
- Location: Birstall, West Yorkshire


