My new E21
Moderator: martauto
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
As for the E30, the e30 needs painted, hand brake cables and a water pump, then itl be a road legal machine
I already have bottle tops for the 21 so im going to polish the lips up a bit and paint the centres gold, drop it maybe 30-40mm and thats as far as cosmetics go thus far.
I already have bottle tops for the 21 so im going to polish the lips up a bit and paint the centres gold, drop it maybe 30-40mm and thats as far as cosmetics go thus far.
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
FinalD
- E30 Zone Camper

- Posts: 1098
- Joined: Wed Apr 25, 2012 11:00 pm
- Location: Bristol
Gold? It isn't an Impreza! 
As you go further back in time with cars, you get softer and softer suspension...wallowy cars are ace provided you don't push them hard, unless you WANT to shart yourself.
As you go further back in time with cars, you get softer and softer suspension...wallowy cars are ace provided you don't push them hard, unless you WANT to shart yourself.
1988 325i Cabriolet - Gone.
-
snakebrain
- E30 Zone Addict

- Posts: 3685
- Joined: Tue Aug 11, 2009 11:00 pm
At least we have one cheery, optimistic soul keeping zoners spirits up!pacerpete wrote:On the subject of pics, I am waiting patiently for rust / bodge pics![]()
Most E21s are horrid corpses on stretchers clinging to bent MOTs and they were like that twenty years ago![]()
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
Thing is,Pete is absolutely correct.snakebrain wrote:At least we have one cheery, optimistic soul keeping zoners spirits up!pacerpete wrote:On the subject of pics, I am waiting patiently for rust / bodge pics![]()
Most E21s are horrid corpses on stretchers clinging to bent MOTs and they were like that twenty years ago![]()
This photo was taken about 20 years ago,check out the rear arches...they are out of shot for a very good reason!

-
snakebrain
- E30 Zone Addict

- Posts: 3685
- Joined: Tue Aug 11, 2009 11:00 pm
On the bright side, you were an adorable child!daimlerman wrote:Thing is,Pete is absolutely correct.
This photo was taken about 20 years ago,check out the rear arches...they are out of shot for a very good reason!
-
Gert_8
- Married to the E30 Zone

- Posts: 11305
- Joined: Mon Dec 08, 2008 11:00 pm
- Location: In your back passage faster than a rat up a drainpipe!
That would make him 25 - what happened to the missing 50 years?!snakebrain wrote:On the bright side, you were an adorable child!daimlerman wrote:Thing is,Pete is absolutely correct.
This photo was taken about 20 years ago,check out the rear arches...they are out of shot for a very good reason!

PONY, 2013 - "Anyway span 360 degrees hitting the kerb and giving the old man two fingers as I was spinning like Michael Schumacher would
-
Chris_B86
- E30 Zone Camper

- Posts: 1167
- Joined: Mon Jul 23, 2012 11:00 pm
I like it, just don't lose sight of the E30 and start tinkering with this.
Have you passed your test now? Or did you drive to work on L plates?
Have you passed your test now? Or did you drive to work on L plates?

1990 E30 325i Sport Sterling Silber
1999 E36 323i Sport Touring Techno Violet
-
Andyboy
- Alpina Colada
- Posts: 12578
- Joined: Mon Sep 11, 2006 11:00 pm
Oxymoron alert!verde wrote: This thing is ******* solid. Im replacing a wing and a sill.
-
scjimbo
- E30 Zone Camper

- Posts: 1249
- Joined: Thu Feb 09, 2012 11:00 pm
- Location: Gloucester
FixedAndyboy wrote:verde wrote: This thing is rusted solid. Im replacing a wing and a sill.
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
Im growing bored of the banter on here. Its almost to the point people hope its a rust box to be proven right
Didnt get pics today as me and two friends spent 4 or 5 hours tuning the timing, carb and replacing hoses and fixing the choke. Thing runs way better.
Next up is an oil change and the timing chain needs tensioned. Im also ordering a new sill tomorrow and will get that on. Apart from that and the wing the rest is great. Im also installing the OEM period cassette player another 2 footwell speakers and the leather E30 rear bench. James also is selling me black half leathers for the front that will go well. Dads been working on the E30 doing the rear bearings while iv been fucking with this..
Its surprisingly lairy, I drove to work and it was snowing this morning, was fine. I did clip a painted road marking coming out a junction though and get very very broadside. But i got it under control and managed to avoid it happening again. Its hard because the throttle cable has about half an inch of play in it and the clutch is very tough. Im learning though
Didnt get pics today as me and two friends spent 4 or 5 hours tuning the timing, carb and replacing hoses and fixing the choke. Thing runs way better.
Next up is an oil change and the timing chain needs tensioned. Im also ordering a new sill tomorrow and will get that on. Apart from that and the wing the rest is great. Im also installing the OEM period cassette player another 2 footwell speakers and the leather E30 rear bench. James also is selling me black half leathers for the front that will go well. Dads been working on the E30 doing the rear bearings while iv been fucking with this..
Its surprisingly lairy, I drove to work and it was snowing this morning, was fine. I did clip a painted road marking coming out a junction though and get very very broadside. But i got it under control and managed to avoid it happening again. Its hard because the throttle cable has about half an inch of play in it and the clutch is very tough. Im learning though
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27985
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
These are worse than an E30 in the wet.
There suspension is twice as worn and old, so get those sorted first.
There suspension is twice as worn and old, so get those sorted first.

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
nickso
- E30 Zone Addict

- Posts: 4396
- Joined: Sat Jul 23, 2005 11:00 pm
- Location: Go do that voodoo that you do so welllllllll!!
Rav speaks the truth.
I have a set of MIM's here that will look good on it. Buy them. You want to. The tyres aren't even that bad.
I have a set of MIM's here that will look good on it. Buy them. You want to. The tyres aren't even that bad.

'88 e30 328i M52 track bint.
-
Rtaylor2208
- E30 Zone Addict

- Posts: 3004
- Joined: Mon Oct 11, 2010 11:00 pm
- Location: Ayr, Ayrshire, Scotland
Verde going on what you said about budget no one can expect a perfect car. As long as this earns your strips for a while and you don't do what pretty much all of us did as a new driver and crash it in quite spectacular fashion trying to impress a bird or your mates your doing fine.
More pictures required
More pictures required
-
George
- E30 Zone Addict

- Posts: 2153
- Joined: Sat Nov 11, 2006 11:00 pm
- Location: Landarn
Great purchase 
We had a 320 (six cyl carb) in Polaris Silver with M Tech go faster stripes and BBS Mahle cross spoeks. Died at around 150k miles - body rusted through.
We had a 320 (six cyl carb) in Polaris Silver with M Tech go faster stripes and BBS Mahle cross spoeks. Died at around 150k miles - body rusted through.

Sold: 1986 E30 325i Cabriolet, Alpine White
-
Andyboy
- Alpina Colada
- Posts: 12578
- Joined: Mon Sep 11, 2006 11:00 pm
If the timing chain needs tensioning then it'll be the top sprocket that's worn out. Common on M10's but only £35 new and a couple of hours to change.
Why are you fitting an E30 leather rear bench?
Why are you fitting an E30 leather rear bench?
-
Gert_8
- Married to the E30 Zone

- Posts: 11305
- Joined: Mon Dec 08, 2008 11:00 pm
- Location: In your back passage faster than a rat up a drainpipe!
Hi Verd. Get the video and more pics up, please....! 

PONY, 2013 - "Anyway span 360 degrees hitting the kerb and giving the old man two fingers as I was spinning like Michael Schumacher would
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
Video - Il get a video filmed at lunch time
E30 rear bench - I hate the blue and vinyl cloth sprung horrid ripped seats. And I have a leather armrest E30 bench.....Makes sense. James is also selling
Mims - What they like Nick and how much. A friend is selling me the E21 turbine wheels with tyres for 80 quid? Im in Aberdoom on Saturday could come see the car if you wish?
Senior Carb Doctor Duff ( my mate Todd ) and Fergus and myself ripped into it yesterday, as above mentioned. When I got it home from the Hospital ( The pavement outside Todds house ) we replaced some of the hoses ( oil hoses were absolutely FUCKED, big slashes ) It runs SOOO much smoother. Just got to work and cant wipe the grin off my face. Its still juddery in the low RPMs, but it idles now and i dont need to heel toe at junctions to keep it from stalling. The power pick up is much much smoother and it just makes the car feel so much better. Im ordering an oil filter at Lunch time then were going to drop and replace the oil tomorrow aswell as do the filter. At the weekend wel be fitting a new throttle cable as this one has a lot of slack and doing the timing
Should I make a thread for this in members rides?
E30 rear bench - I hate the blue and vinyl cloth sprung horrid ripped seats. And I have a leather armrest E30 bench.....Makes sense. James is also selling
Mims - What they like Nick and how much. A friend is selling me the E21 turbine wheels with tyres for 80 quid? Im in Aberdoom on Saturday could come see the car if you wish?
Senior Carb Doctor Duff ( my mate Todd ) and Fergus and myself ripped into it yesterday, as above mentioned. When I got it home from the Hospital ( The pavement outside Todds house ) we replaced some of the hoses ( oil hoses were absolutely FUCKED, big slashes ) It runs SOOO much smoother. Just got to work and cant wipe the grin off my face. Its still juddery in the low RPMs, but it idles now and i dont need to heel toe at junctions to keep it from stalling. The power pick up is much much smoother and it just makes the car feel so much better. Im ordering an oil filter at Lunch time then were going to drop and replace the oil tomorrow aswell as do the filter. At the weekend wel be fitting a new throttle cable as this one has a lot of slack and doing the timing
Should I make a thread for this in members rides?
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
at the doctors....Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
Gert_8
- Married to the E30 Zone

- Posts: 11305
- Joined: Mon Dec 08, 2008 11:00 pm
- Location: In your back passage faster than a rat up a drainpipe!
+1diable wrote:Yeah, stick a build thread up.verde wrote:
Should I make a thread for this in members rides?

PONY, 2013 - "Anyway span 360 degrees hitting the kerb and giving the old man two fingers as I was spinning like Michael Schumacher would
-
scjimbo
- E30 Zone Camper

- Posts: 1249
- Joined: Thu Feb 09, 2012 11:00 pm
- Location: Gloucester
[quote="verde"]Im growing bored of the banter on here. Its almost to the point people hope its a rust box to be proven right
Verde don't get sulky. I'm only jealous.
Verde don't get sulky. I'm only jealous.
-
Gert_8
- Married to the E30 Zone

- Posts: 11305
- Joined: Mon Dec 08, 2008 11:00 pm
- Location: In your back passage faster than a rat up a drainpipe!
EFA.scjimbo wrote:verde wrote:Im growing bored of the banter on here. Its almost to the point people hope its a rust box to be proven right
Verde don't get sulky, or I'll make you clean your room! .

PONY, 2013 - "Anyway span 360 degrees hitting the kerb and giving the old man two fingers as I was spinning like Michael Schumacher would
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
But Gerrrrrt, I cleaned it yesterday!!!!Gert_8 wrote:scjimbo wrote:EFA.verde wrote:Im growing bored of the banter on here. Its almost to the point people hope its a rust box to be proven right
Verde don't get sulky, or I'll make you clean your room! .
ha, Il get a build thread up once iv done these stats.
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
capnmchl
- E30 Zone Camper

- Posts: 1141
- Joined: Mon Feb 20, 2012 11:00 pm
- Location: Exeter, Devon
~£70 from BMW when I asked a month ago, but a Febi one(#25063) can be had for about £30. Non in the country though, unless your local Febi supplier has had one sat on the shelf since 1986 :p. I've been waiting for one for about a month now. Doesn't help citylink lost one though.Andyboy wrote:If the timing chain needs tensioning then it'll be the top sprocket that's worn out. Common on M10's but only £35 new and a couple of hours to change.
Why are you fitting an E30 leather rear bench?
Easy enough to change. Might as well do the tensioner piston whilst your there as well.
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
I dont know if its fucked yet I might just need to adjust it, but we shall see. Im having so much fun working on it. My dad has been doing a lot of the e30 mechanically bits but im loving getting underneath and stuck into it. I have more motivation because I can actually get in, drive it and feel the difference
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
capnmchl
- E30 Zone Camper

- Posts: 1141
- Joined: Mon Feb 20, 2012 11:00 pm
- Location: Exeter, Devon
You can't really adjust it as such. It's a hydraulic tensioner. Once there is too much wear on the sprockets and chain, it just simply can't tension it enough anymore. The only cure is to change the sprockets and chain. But it's easier to change the cam sprocket and tensioner than anything else so might as well start there.
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
Shit, is it an expensive cure? Could just buy a new chain and see how that goes?
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
Also lowering springs...could I lower it 40mm without changing shocks?
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
pacerpete
- E30 Zone Team Member

- Posts: 18168
- Joined: Sun Jan 23, 2005 11:00 pm
- Location: Iver heath. South bucks.
The mum pics can wait, where are the rust pics ? 
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
the roads are pretty dam bad actually. I dont want it lowered much, the car just needs stiffered a bit, its so wallowy its a bit scary, it causes the rear end to bounce and skipdiable wrote:On the roads where you live the harsh ride will cause the car to fall apartverde wrote:Also lowering springs...could I lower it 40mm without changing shocks?
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
Gert_8
- Married to the E30 Zone

- Posts: 11305
- Joined: Mon Dec 08, 2008 11:00 pm
- Location: In your back passage faster than a rat up a drainpipe!
Rav's already told you what you need to do there, Verd!verde wrote:the roads are pretty dam bad actually. I dont want it lowered much, the car just needs stiffered a bit, its so wallowy its a bit scary, it causes the rear end to bounce and skipdiable wrote:On the roads where you live the harsh ride will cause the car to fall apartverde wrote:Also lowering springs...could I lower it 40mm without changing shocks?

PONY, 2013 - "Anyway span 360 degrees hitting the kerb and giving the old man two fingers as I was spinning like Michael Schumacher would
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
Before I do bushes i need to stop the engine juddering and the terrible gas linkage. The car judders in low RPM making town driving expensive and pretty hard, plus you look like a fucking dick
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
