Key snapped in door lock.
Moderator: martauto
-
Rich2388
- E30 Zone Regular

- Posts: 643
- Joined: Tue Oct 30, 2012 11:00 pm
- Location: Croydon/Surrey/South London
As the title says really. It has really fu(ked me off!! Anone got any advice or ideas on how i can the broken bit of key out of my car lock? Without me taking door cards off etc because i dont know how and havent got tools to do it? Any advice as quick as poss would be great as i can lock my drivers door now because central locking aint working properly. Cheers
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
A very small amount of 'superglue' on the broken end of your broken key handle and you may be lucky, but I doubt it. Otherwise, its take the door card off, and remove the handle. There's sufficient tools in the toolkit in the boot to do this!
As long as all of the 'working' part of the key is in the lock, the barrel should be removable from the lock, and then you can tease the broken bit out.
Note that if you had bothered to sort the central locking out, this problem wouldn't have happened! A stitch in time, etc.
As long as all of the 'working' part of the key is in the lock, the barrel should be removable from the lock, and then you can tease the broken bit out.
Note that if you had bothered to sort the central locking out, this problem wouldn't have happened! A stitch in time, etc.
-
Rtaylor2208
- E30 Zone Addict

- Posts: 3004
- Joined: Mon Oct 11, 2010 11:00 pm
- Location: Ayr, Ayrshire, Scotland
Tools shouldn't really be a problem when removing the door card and lock barrel. You only need a star and flat headed screw driver and about 20mins.
-
Rich2388
- E30 Zone Regular

- Posts: 643
- Joined: Tue Oct 30, 2012 11:00 pm
- Location: Croydon/Surrey/South London
Managed to get the broken bit of key out using a whole load of patience, some dentist tools and a pair of long nose pliers. So if that happens to anyone else in future, they are the 3 things your going to need.
