wrong part of oil pump maybe?

Need technical Q/A then you're in the right place

Moderator: martauto

liam012
E30 Zone Camper
E30 Zone Camper
Posts: 1424
Joined: Sun Aug 28, 2005 11:00 pm

Post Wed Dec 28, 2005 5:37 pm

i rang bmw and ordered in a new oil pump for my 525e but on looking further (real oem) i have found that the housing and the mechanical parts are sold seperately? is this true? as i am hoping this will be in from england tommorrow and would be a big hold up if its the wrong part!! i know my hoiusing is in good nick - i was just being cautious thinking better change the old pump and now it looks klike i might have made what they call a " doo doo". ....
Turbo-Brown
Boost Junkie
Posts: 4705
Joined: Tue Feb 15, 2005 11:00 pm
Location: Aldershot, Hants

Post Wed Dec 28, 2005 7:08 pm

Assumuing all M20 pumps are pretty much the same, the complete assembly should be about Ԛ£90 from the dealers if that's any help?

Might be an idea to order a new pencil drive too. No idea if the BMW ones habitually break, but they seem to on other cars and for the Ԛ£3 or Ԛ£4 they cost....
325i Twin Turbo (until 10am 01/12/07 :( )

www.air-in.co.uk free M20 exhaust and inlet flange
Templ8e30
E30 Zone Addict
E30 Zone Addict
Posts: 2801
Joined: Mon Jan 10, 2005 11:00 pm
Location: Ashton-under-Lyne, Lancashire

Post Wed Dec 28, 2005 10:43 pm

Turbo-Brown wrote:Assumuing all M20 pumps are pretty much the same, the complete assembly should be about Ԛ£90 from the dealers if that's any help?

Might be an idea to order a new pencil drive too. No idea if the BMW ones habitually break, but they seem to on other cars and for the Ԛ£3 or Ԛ£4 they cost....
All the M20 oil pumps I've seen are identical, I got mine from GSF for about Ԛ£45 (Febi)

I'd replace the drive shaft too, they wear on the corners of the hex drive and look like they could round off.

Cheers,

Iain T
Image
2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !