What did you do to your E30 today?

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

Post Reply
oomz1975
E30 Zone Addict
E30 Zone Addict
Posts: 2019
Joined: Mon Feb 09, 2009 11:00 pm
Location: London UK

Sat Jan 19, 2013 6:59 pm

Drove it around, had some fun....love this car. :drive:
Image
Sanchez
Married to the E30 Zone
Married to the E30 Zone
Posts: 7578
Joined: Sun Apr 17, 2005 11:00 pm
Location: Sunny Scotland

Sat Jan 19, 2013 9:05 pm

made it run on 6 cylinders :D
Image
zimmermatt
E30 Zone Regular
E30 Zone Regular
Posts: 271
Joined: Thu Nov 27, 2008 11:00 pm
Location: Wiltshire

Sun Jan 20, 2013 1:27 pm

Dont have one at the mo but if I did it would be going sideways somewhere discreet :D :D :D
User avatar
sunnysr
E30 Zone Regular
E30 Zone Regular
Posts: 333
Joined: Wed Jun 21, 2006 11:00 pm
Location: Northeast

Sun Jan 20, 2013 4:48 pm

shouted at it ,fitted my new engine on friday ,finished plumbing and wiring it in today ,put fuel to it ,that poured out all over the fuel rail ,so took that out replaced the o rings on the injecotrs ,refitted that it leaked again so removed that again fitted my old one that fixed all leaks ,tried to start it ,it was making a squeaking noise as it was turning over and altho it had a nice spark it didnt start then the battery died ,i was cold and tired by this point so went in ,hopefully will go out with a fresh head later in the week when i get time and get it started ,it has been stood a while
Captain_Birdseye
E30 Zone Regular
E30 Zone Regular
Posts: 874
Joined: Sun Mar 25, 2012 11:00 pm
Location: Bristol (and Cheltenham)

Mon Jan 21, 2013 8:13 pm

gooner1 wrote:Feck all. The new parts I ordered on Saturday still haven,t arrived.
Not from BMW I hasten to add.
will be all that snow :D


Cleaned engine bay, put new wheel on, started up as no battery, went to homebase carpark and went weeeeeeeeeeeeee! Cleaned crap out of it, superglued gear knob on.
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Mon Jan 21, 2013 8:21 pm

Cloggy Saint wrote:Fitted a new clutch and started putting everything back together.

Image
Looks lovely,did the same to mine when I built it.

Snag is,in the engine bay,all you see is the top of the engine and the inlet manifold. :cry:
All the pretty bits underneath are hidden,but at least it is clean when it goes in,making oil leaks a little easier to trace.
Cloggy Saint
Old Skooler
Old Skooler
Posts: 8024
Joined: Sun Jan 09, 2005 11:00 pm
Location: zummerzet

Mon Jan 21, 2013 8:26 pm

Yeah, I realise that, but I'll know it's all clean :) , and hopefully it will make any future work a cleaner experience, until the inevitable oil leaks kick in.
Image

E30 zone - promoting adult illiteracy since 2004
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Mon Jan 21, 2013 9:15 pm

On a more serious note,if that's possible on the zone today,fit a new o ring top and bottom on the crankcase breather tube that fits between the bottom of the inlet manifold and the crankcase,restrain the spring on the tube with a couple of cable ties until the inlet mani is bolted home,then cut the ties and guide the tube home.
This is the main cause of oil 'mist' type leaks,careful instalation will help.
Youth is wasted on the young.
Cloggy Saint
Old Skooler
Old Skooler
Posts: 8024
Joined: Sun Jan 09, 2005 11:00 pm
Location: zummerzet

Mon Jan 21, 2013 9:37 pm

I have new rings waiting :)
Image

E30 zone - promoting adult illiteracy since 2004
Morat
E30 Zone Team Member
E30 Zone Team Member
Posts: 8943
Joined: Thu Feb 09, 2006 11:00 pm
Location: The Peoples Republic of Yorkshire

Mon Jan 21, 2013 9:53 pm

Drove it 18 miles to the station through lots of snow and snarled up traffic. Missed the train. Handed the keys over to my wife who picked me up this evening and said how much she'd enjoyed driving it and how impressed she was with the way it handles snow. "It only skidded when I wanted it to" :)
Win.
E30 Touring 0.35 cD - more slippery than prison soap :)

Image
Praise the Lard... and pass the dripping!
User avatar
GooneriC
E30 Zone Regular
E30 Zone Regular
Posts: 304
Joined: Wed Jun 22, 2011 11:00 pm
Location: Barbados

Mon Jan 21, 2013 11:46 pm

Was changing the distributor on my 86 chromie , the shaft at the bottom dropped off when i was pulling the old one out , straight down the side and down into the sump :-x , spent the rest of the day dropping the subframe , removing the sump , taking the shaft piece out and bolting back up again. Squeezed two of my fingers when i bolting the subframe back up , hurts like hell. What was supposed to be a short 45 minute job took me almost 4 hours. And today was a holiday too. WTF.
User avatar
davidt
Pompey Council 4 door deviant
Posts: 2760
Joined: Sat Feb 18, 2006 11:00 pm
Location: portsmouth

Wed Jan 23, 2013 4:03 pm

painted the exhaust and fitted a chip from speedtouch

Image
User avatar
harvey172
E30 Zone Newbie
E30 Zone Newbie
Posts: 14
Joined: Mon Aug 30, 2010 11:00 pm
Location: County Down, Northern Ireland

Wed Jan 23, 2013 10:25 pm

went and picked up a new one for my girlfriend (its her 1st E30) and she drove it home, then we both admired it for a while. :mad:
Morat
E30 Zone Team Member
E30 Zone Team Member
Posts: 8943
Joined: Thu Feb 09, 2006 11:00 pm
Location: The Peoples Republic of Yorkshire

Wed Jan 23, 2013 11:58 pm

harvey172 wrote:went and picked up a new one for my girlfriend (its her 1st E30) and she drove it home, then we both admired it for a while. :mad:
Pics!!!
(and pics of the car!)
E30 Touring 0.35 cD - more slippery than prison soap :)

Image
Praise the Lard... and pass the dripping!
darkchild
E30 Zone Addict
E30 Zone Addict
Posts: 2730
Joined: Mon Feb 06, 2006 11:00 pm
Location: Kingston 12

Thu Jan 24, 2013 6:26 am

Taking mine for its MOT today. :)
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Thu Jan 24, 2013 9:31 am

Sanchez wrote:made it run on 6 cylinders :D
The problem was?!
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24536
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Thu Jan 24, 2013 1:31 pm

Simon13 wrote:
Sanchez wrote:made it run on 6 cylinders :D
The problem was?!
+1?
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
User avatar
moggie
E30 Zone Regular
E30 Zone Regular
Posts: 307
Joined: Mon Jan 25, 2010 11:00 pm
Location: Leem

Thu Jan 24, 2013 7:46 pm

bought eibach springs,
brembo discs,
green stuff pads,
new track rod ends,
bottom ball joints,
drop links front and rear,
oh and a gearstick gaiter cover from mick as ive just converted it from auto to manual :D
Quaser
E30 Zone Addict
E30 Zone Addict
Posts: 2622
Joined: Sun Jan 09, 2005 11:00 pm
Location: West London

Thu Jan 24, 2013 7:58 pm

started taking the engine out
BMW E30 2.0 Convertible (M52B28)
BMW E30 2.0 2 Door (M20B28 Turbo project to start)
BMW E36 328i Sport (M52B28 Turbo Project)
http://www.e30zone.net/modules.php?name ... ic&t=68663
User avatar
mtbsi
E30 Zone Newbie
E30 Zone Newbie
Posts: 4
Joined: Mon Aug 06, 2012 11:00 pm

Thu Jan 24, 2013 8:14 pm

Drove it as I do everyday. Gave it large at a 3 lane traffic light standing start. Still a bit slippy out there! No harm done!(325i touring)
Green
E30 Zone Squatter
E30 Zone Squatter
Posts: 1698
Joined: Wed Mar 17, 2010 11:00 pm
Location: Santa Pod

Fri Jan 25, 2013 1:13 am

I can now lock and unlock my car from the passenger side, working on drivers side tomorrow :D
Image
darkchild
E30 Zone Addict
E30 Zone Addict
Posts: 2730
Joined: Mon Feb 06, 2006 11:00 pm
Location: Kingston 12

Fri Jan 25, 2013 7:19 am

darkchild wrote:Taking mine for its MOT today. :)
Well, after replacing the ball joint dust cover, it passed with flying colours and not even a single advisory. 8)

Just need to fix the intermittent passenger side speaker before a 400 mile trip to Scotland next month. That can wait until the weather warms up though. Feck working on cars in these temperatures, it was -9 here last night.
clipper
E30 Zone Squatter
E30 Zone Squatter
Posts: 1980
Joined: Mon Aug 22, 2005 11:00 pm
Location: Madrid

Fri Jan 25, 2013 10:52 am

Yesterday I used my E30 to take one of my company's in-house lawyers, and two legal department directors (one of whom is my German boss!) to a restaurant.

I'm not sure that they were very impressed with the "classic" transport..... especially when I told them that they had to push the door lock button down before they closed the door :roll:
These are sensations as hard to forget as they are to ignore.....
Craggy73
E30 Zone Newbie
E30 Zone Newbie
Posts: 177
Joined: Wed Dec 26, 2012 11:00 pm
Location: Cheshire, UK

Fri Jan 25, 2013 11:02 am

darkchild wrote:... That can wait until the weather warms up though. Feck working on cars in these temperatures, it was -9 here last night.
Amen! The snow is falling here again so I'm in the kitchen stripping down my front calipers for a respray.
Image
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Fri Jan 25, 2013 1:41 pm

I had the pleasure of watching my touring glide through it's MoT.

13400 miles over the year... :mad:

Three advisories;
Minor exhaust leak(similar to the last three years,but the place varies)
Rear brake flexi's corroding(first mentioned two years ago,but not last year)
Fuel pipes corroded(first mention)
Youth is wasted on the young.
User avatar
sunnysr
E30 Zone Regular
E30 Zone Regular
Posts: 333
Joined: Wed Jun 21, 2006 11:00 pm
Location: Northeast

Sun Jan 27, 2013 5:17 pm

started it ....for the first time in over 10 years the engine has ran ,stuck a light weight flywheel in it the other day it sounds good ,cant wait to have a drive of it
Rav335uk
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 27985
Joined: Wed Jan 19, 2005 11:00 pm
Location: Mad mad mad
Contact:

Sun Jan 27, 2013 5:24 pm

Bought another set of wheels for it today :D
Image
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
User avatar
M6luvva
E30 Zone Newbie
E30 Zone Newbie
Posts: 108
Joined: Wed May 16, 2012 11:00 pm

Sun Jan 27, 2013 5:29 pm

New 323i rear badge, with official factory spacing lol
Image
Last edited by M6luvva on Sun Jan 27, 2013 5:35 pm, edited 2 times in total.
sunnyr83
E30 Zone Addict
E30 Zone Addict
Posts: 2286
Joined: Fri Jun 05, 2009 11:00 pm
Location: West London 'init'

Sun Jan 27, 2013 5:31 pm

Looked at it in disgust...
e30-EVN
Old Skooler
Old Skooler
Posts: 3382
Joined: Sun Dec 13, 2009 11:00 pm
Location: S.Wales

Sun Jan 27, 2013 5:34 pm

spent a few hours stripping the interior out, car under going a transformation :)
A 2 door e30 with 8 cylinders, what could be better winkeye :D
User avatar
Nightshift
E30 Zone Newbie
E30 Zone Newbie
Posts: 56
Joined: Thu Jul 28, 2011 11:00 pm
Location: London

Sun Jan 27, 2013 5:44 pm

Turned the key, scowled at it as nothing happened, came back inside.
kangman
E30 Zone Squatter
E30 Zone Squatter
Posts: 1935
Joined: Mon May 24, 2010 11:00 pm
Location: Heathrow

Sun Jan 27, 2013 6:06 pm

Tried to fit my grill badge... Failed! by scratching the paint of the grill, So gave up and put the cover back on.

I'll do it properly when the temperature picks up again.

Image
FinalD
E30 Zone Camper
E30 Zone Camper
Posts: 1098
Joined: Wed Apr 25, 2012 11:00 pm
Location: Bristol
Contact:

Sun Jan 27, 2013 6:07 pm

Put it back together, just needs insurance, mot and tax now then I can sell the Mondeo. :D
Quaser
E30 Zone Addict
E30 Zone Addict
Posts: 2622
Joined: Sun Jan 09, 2005 11:00 pm
Location: West London

Sun Jan 27, 2013 6:31 pm

Fitted a M52 engine - and it runs (Thanks to Louis for his help!!)
BMW E30 2.0 Convertible (M52B28)
BMW E30 2.0 2 Door (M20B28 Turbo project to start)
BMW E36 328i Sport (M52B28 Turbo Project)
http://www.e30zone.net/modules.php?name ... ic&t=68663
Post Reply