Easy id on this engine?

Moderator: martauto

eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Tue Nov 06, 2012 9:38 pm

I believe its an M52TU?
Anyway to identify which it is though without scratching round for the engine number?
Capicity embossed on the block somewhere?

Image
Image
Image
User avatar
rich318i
E30 Zone Addict
E30 Zone Addict
Posts: 2393
Joined: Wed Oct 26, 2005 11:00 pm
Location: Brands :) :)

Post Tue Nov 06, 2012 10:27 pm

looks like one as it as has the twin VANOS.

is that a M50 2.5 manifold on it?
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Tue Nov 06, 2012 10:33 pm

I was fairly sure it was M52 and not M54 but how to tell which size?
Image
User avatar
rich318i
E30 Zone Addict
E30 Zone Addict
Posts: 2393
Joined: Wed Oct 26, 2005 11:00 pm
Location: Brands :) :)

Post Tue Nov 06, 2012 10:41 pm

if the manifolds not been swaped about from standard. it be stamped on that. 2.5, 2.8. but not easy to see with it on the car

not sure about the ECU part number if that can tell you but with a try but you have to ring up a main dealers or check realoem.com and cross ref the number
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Tue Nov 06, 2012 10:43 pm

rich318i wrote:if the manifolds not been swaped about from standard. it be stamped on that. 2.5, 2.8. but not easy to see with it on the car

not sure about the ECU part number if that can tell you but with a try but you have to ring up a main dealers or check realoem.com and cross ref the number
Well its got an M50 manifold so rules that way out but good call on the ECU number.
Image
maxfield
Old Skooler
Old Skooler
Posts: 15185
Joined: Sat Nov 26, 2005 11:00 pm
Location: Mansfield

Post Tue Nov 06, 2012 10:43 pm

The conversion doesn't look too clever. :eek:
Image
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Tue Nov 06, 2012 10:44 pm

maxfield wrote:The conversion doesn't look too clever. :eek:
Ive seen better :P
Image
User avatar
rich318i
E30 Zone Addict
E30 Zone Addict
Posts: 2393
Joined: Wed Oct 26, 2005 11:00 pm
Location: Brands :) :)

Post Tue Nov 06, 2012 10:50 pm

looks likes ruff didnt want to say lol
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Tue Nov 06, 2012 10:55 pm

rich318i wrote:looks likes ruff didnt want to say lol
Dont think i did this please,fook would I put my name to that 8O
Bought it for breaking but previous owner knows little about either.
Image
maxfield
Old Skooler
Old Skooler
Posts: 15185
Joined: Sat Nov 26, 2005 11:00 pm
Location: Mansfield

Post Tue Nov 06, 2012 10:58 pm

There was a blue convertible round here with an M50 in of some description, that was rough too.

Reading your first post - on the block at the rear of the engine, passenger side there is a casting lump with engine capacity stamped on.
Image
User avatar
rich318i
E30 Zone Addict
E30 Zone Addict
Posts: 2393
Joined: Wed Oct 26, 2005 11:00 pm
Location: Brands :) :)

Post Tue Nov 06, 2012 11:01 pm

eko wrote:
rich318i wrote:looks likes ruff didnt want to say lol
Dont think i did this please,fook would I put my name to that 8O
Bought it for breaking but previous owner knows little about either.


the person who did that should be shoot. looks dangerous too
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Tue Nov 06, 2012 11:01 pm

maxfield wrote:There was a blue convertible round here with an M50 in of some description, that was rough too.

Reading your first post - on the block at the rear of the engine, passenger side there is a casting lump with engine capacity stamped on.
This is a Black Mtec kitted rusty turd.

Ill see if I see that on the block in daylight.
Image
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Tue Nov 06, 2012 11:05 pm

rich318i wrote:
eko wrote:
rich318i wrote:looks likes ruff didnt want to say lol
Dont think i did this please,fook would I put my name to that 8O
Bought it for breaking but previous owner knows little about either.


the person who did that should be shoot. looks dangerous too
Check out the servo or should I say lack of!
Its got what looks like an early 7 series remote set up fitted.
It certainly operates but discs and pads look like they are about to disintigrate.
Image
User avatar
rich318i
E30 Zone Addict
E30 Zone Addict
Posts: 2393
Joined: Wed Oct 26, 2005 11:00 pm
Location: Brands :) :)

Post Tue Nov 06, 2012 11:08 pm

eko wrote:
rich318i wrote:
eko wrote: Dont think i did this please,fook would I put my name to that 8O
Bought it for breaking but previous owner knows little about either.


the person who did that should be shoot. looks dangerous too
Check out the servo or should I say lack of!
Its got what looks like an early 7 series remote set up fitted.
It certainly operates but discs and pads look like they are about to disintigrate.
and these people are the reason they want to ban car modifying
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Tue Nov 06, 2012 11:18 pm

Im guessing its using non vanos management with lots of surprises in store, no doubt it will look much better as a big box full of spares 8O
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Tue Nov 06, 2012 11:23 pm

DanThe wrote:Im guessing its using non vanos management with lots of surprises in store, no doubt it will look much better as a big box full of spares 8O
Ive no idea till I start pulling it apart mate.
It seems to run ok but im sure daylight will reveal a few surprises :D
Image
User avatar
blue30
E30 Zone Regular
E30 Zone Regular
Posts: 354
Joined: Wed Jan 09, 2008 11:00 pm
Location: Stoke on Trent

Post Tue Nov 06, 2012 11:36 pm

Looks like twin vanos cam cover? But m50 style inlet? Which is strange because twin vanos M52 use M54 style manifolds...

Was gonna say it looks weirdly close to the rad but it doesnt look like the rad is on it's brackets properly.

Yeah check it out
http://www.ebay.com/itm/BMW-E46-E39-328 ... 0365888091

Deffo twin vanos cam cover but the M50/52 has a completely different inlet different port shape than the M52TU, can't see it making much power with a mismatched manifold, no vanos control and whack-ass M50 management.
Last edited by blue30 on Tue Nov 06, 2012 11:46 pm, edited 2 times in total.
BATTS91
E30 Zone Squatter
E30 Zone Squatter
Posts: 1764
Joined: Sat May 01, 2010 11:00 pm
Location: clacton on sea essex

Post Tue Nov 06, 2012 11:37 pm

Looks to me as if it has an m50 maf ! My guess is its running m50 non vanos managmet too