Anyone tried this on a e30 I assume it's probably better on not so old cars and not ones where sensors etc are worn due to general age and use?
Terraclean?
Moderator: martauto
-
HairyScreech
- Engaged to the E30 Zone

- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
no, just no.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
-
Alex
- Married to the E30 Zone

- Posts: 22665
- Joined: Fri Feb 11, 2005 11:00 pm
- Location: Johannesburg, South Africa
Ive put diesel oil in my m20b25 to clean it out 
-
adit
- Married to the E30 Zone

- Posts: 13727
- Joined: Wed Jun 20, 2007 11:00 pm
- Location: portsmouth
[youtube][/youtube]

E30 Parts Galore!! 07901 888019
[quote="bss325i"]
Get a f* grip,we are talking about 20+yr.old sub £10k cars here,NOT the crown jewels!
-
gman1
- E30 Zone Newbie

- Posts: 245
- Joined: Wed May 16, 2012 11:00 pm
This seems like good thing.......right?????....if not why?? 
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
What a pair of mongs 
-
Ianb
- E30 Zone Regular

- Posts: 517
- Joined: Sun Feb 14, 2010 11:00 pm
Dan, If you already think they're a pair of mongs wait till you see the trailer on Discovery for their new series, dressed up as Teddyboys dancing over a red wolsey - What a pair of Coonts.............Discovery should copy Go Compare with their "How to kill the Tennor " and start inviting viewers to decide how Brewer snuffs it - I recon the Zone could come up with a few good suggestions 
-
BATTS91
- E30 Zone Squatter

- Posts: 1764
- Joined: Sat May 01, 2010 11:00 pm
- Location: clacton on sea essex
Fuel return ?Correct me if im wrong but Didnt he just pull the vacume off the fuel pressure regulator ? That show is full of bollox !
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
BEFORE: 0.65%
AFTER: 0.54%
Ed China: "And we've almost HALVED the carbon monoxide content!"
Having seen the E30 episode where Ed sprays a bonnet with a couple of rattle cans of primer before sending it off for a professional respray, I wouldn't trust that fop-haired monkey an inch.
AFTER: 0.54%
Ed China: "And we've almost HALVED the carbon monoxide content!"
Having seen the E30 episode where Ed sprays a bonnet with a couple of rattle cans of primer before sending it off for a professional respray, I wouldn't trust that fop-haired monkey an inch.
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
G-Bear
- E30 Zone Squatter

- Posts: 1631
- Joined: Wed Mar 12, 2008 11:00 pm
- Location: Hertfordshire
Yep, monkeys does spring to mind when I see these two. Hadn't seen it in years. Then dug out the episode with an E30 on. Went on about huge power gains from an induction system and sourcing pattern parts. Makes me have my doubts...
-
HairyScreech
- Engaged to the E30 Zone

- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
Diesel oil is a far better more gentle way to clean the engine out over many miles rather than dislodging everything all at once.
Have actually heard of engines leaking like sives and blocking always with grunge after treatments similar to this.
Have actually heard of engines leaking like sives and blocking always with grunge after treatments similar to this.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
-
harry_p
- Engaged to the E30 Zone

- Posts: 5313
- Joined: Thu Oct 12, 2006 11:00 pm
- Location: norfolk
Completely different though, this doesn't touch the oil / oilways. it's really just a high strength injector cleaner mixed with fuel which they plumb directly into the fuel rail.
I think for the money i'd rather have my injectors properly cleaned and serviced.
Without seeing independent before and after borescope pictures I'm massively skeptical about the stuff cleaning the combustion chamber, valves, lambda sensors etc.
I think for the money i'd rather have my injectors properly cleaned and serviced.
Without seeing independent before and after borescope pictures I'm massively skeptical about the stuff cleaning the combustion chamber, valves, lambda sensors etc.
cheers,
harry
harry
-
HairyScreech
- Engaged to the E30 Zone

- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
Ohhhh its that one, my bad.
As you say still not worth it, send them to injection tune.
As you say still not worth it, send them to injection tune.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
