stolen center caps!!

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

User avatar
wangdangdo
E30 Zone Newbie
E30 Zone Newbie
Posts: 4
Joined: Mon Jan 30, 2012 11:00 pm

Post Sun Sep 09, 2012 1:39 pm

Hello what a great forum!! ok I just wondering if anybody knows of a way to make the centre caps on my 14" bbs wheels more secure? some little sod has nicked all 4 from my lovely 1989 325i touring Arr & I don't just want to waste money buying some from evilbay just to have them nicked again, thanks very much cheers
adit
Married to the E30 Zone
Married to the E30 Zone
Posts: 13727
Joined: Wed Jun 20, 2007 11:00 pm
Location: portsmouth

Post Sun Sep 09, 2012 9:23 pm

Snap! i had a full set stolen from my Touring too! i don't (sorry, i mean DIDn't) remove them as it's usually the 15s that get taken. fortunately i have spares.
maybe the thieving scum lowlife mistook them for 15s, thinking he could make a few quid.
Image

E30 Parts Galore!! 07901 888019

[quote="bss325i"]
Get a f* grip,we are talking about 20+yr.old sub £10k cars here,NOT the crown jewels!
mrLEE30
E30 Zone Team Member
E30 Zone Team Member
Posts: 6589
Joined: Tue Jan 18, 2005 11:00 pm
Location: Sweating buckets in Bahrain

Post Mon Sep 10, 2012 12:18 pm

there is not a lot you can do really, i have heard some of the threaded BBS centre caps can be bolted to the wheel by tapping a small thread and putting a small bolt trough it, which of course can be removed but it helps a little.

what i do with my 16 inch BBS is i put silicone sealant on the inside if the cap and some on the end of the thread, i then use some large stiltsons to get then on (and off) its a pain to remove them with a big spanner, so much harder if someone turns up with a BBS tool, basicaly it does not stop them it just slows them down hopefully enough to put them off.

Otherwise i remove them if car parked overnight away from home.


my "tool"

Image
Image
User avatar
scallyally
E30 Zone Newbie
E30 Zone Newbie
Posts: 228
Joined: Mon May 28, 2012 11:00 pm
Location: east london

Post Mon Sep 10, 2012 5:51 pm

MrLEE30, that "tool" of your's is far too drastic for those gorgeous wheels. Far better at removing the nuts off the low-life you might find hanging round your motor. I'm looking into securing my caps as suggested above, (6x10mm c/s cap screws)
User avatar
andyp
True Old Skooler
Posts: 6899
Joined: Sun Jan 09, 2005 11:00 pm
Location: LONDON

Post Mon Sep 10, 2012 6:09 pm

they will be gutted when they find out they are only 14" ones

i used clear silicone on the back of mine it makes it a lot harder to come off, thats about all you can do
G-Bear
E30 Zone Squatter
E30 Zone Squatter
Posts: 1631
Joined: Wed Mar 12, 2008 11:00 pm
Location: Hertfordshire

Post Mon Sep 10, 2012 11:11 pm

Silicone is what I have been thinking of too. I never had the caps on my previous e30. But now i check for missing centres every time now on my new one.. It's a Touring too.. Best go out and check..!