Had a quick search on the wiki couldn't find anything.
My question is what is the difference between the 2 locks and can 1 be fitted on to the other?
Thanks
Boot lock - Tailgate lock.....
Moderator: martauto
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
Sanchez
- Married to the E30 Zone

- Posts: 7578
- Joined: Sun Apr 17, 2005 11:00 pm
- Location: Sunny Scotland
if you mean saloon and touring then there are different.
The actual barrel may be interchangeable but not the rest.
The actual barrel may be interchangeable but not the rest.
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
This sums it up nicely:Sanchez wrote:if you mean saloon and touring then there are different.
The actual barrel may be interchangeable but not the rest.
http://www.e30zone.net/e30zonewiki/index.php/Locks#Boot
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
Mo13
- E30 Zone Regular

- Posts: 722
- Joined: Tue Apr 03, 2012 11:00 pm
- Location: East London
I did get that but when I click on tailgate I get this:Grrrmachine wrote:You put Locks into the Wiki and didn't get this?
http://www.e30zone.net/e30zonewiki/index.php/Locks
Permission error
You do not have permission to do that, for the following reason:
The action you have requested is limited to users in the group user.
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
Tailgate's in red, meaning that page has not been written yet. But all the lock info is (conveniently) on the Locks page.
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
Mo13
- E30 Zone Regular

- Posts: 722
- Joined: Tue Apr 03, 2012 11:00 pm
- Location: East London
Thanks GrrrmachineGrrrmachine wrote:Tailgate's in red, meaning that page has not been written yet. But all the lock info is (conveniently) on the Locks page.
Boot
The rear end of each E30 is secured with a boot lock that locks the boot lid. Touring models also have a rear lock for the tailgate which is specific to that model.
While the boot lock is easily removed by unbolting it from the inside, like the ignition barrel, it is a sealed unit that cannot be dismantled and recoded. If your boot lock is broken, you will need to order a specially recoded one from BMW to match your other keys.
Is there any possibility at all of swapping the key/lock component from a touring into the casing of a saloon/cab to fit on to a saloon/cab?
or will I just F**K the locks up even trying?
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
I've tried dismantling a touring lock once to get to the tumblers, but there's so much specific plastic that makes part of the "sealed" unit that it's unlikely. I've never had a saloon boot lock in my hand to compare them.
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
Mo13
- E30 Zone Regular

- Posts: 722
- Joined: Tue Apr 03, 2012 11:00 pm
- Location: East London
sounds like alot of hassle
I think it'll just be a lot easier to get a cab lock set
I think it'll just be a lot easier to get a cab lock set
