Seized brake nipples

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

Farbbm
E30 Zone Newbie
E30 Zone Newbie
Posts: 216
Joined: Sun Feb 24, 2008 11:00 pm
Location: bedfordshire

Post Fri Aug 31, 2012 3:18 pm

I dropped my car off to have an MOT and brake fluid change this morning, but i've just received a call from the garage to say that one of the brake nipples has broken off and at least two for the others have seized. The garage have advised changing the calipers but that sounds expensive. Any one have any advice or expierence of the this sort of problem?
macas
E30 Zone Squatter
E30 Zone Squatter
Posts: 1696
Joined: Sat Mar 10, 2007 11:00 pm
Location: BEAUTIFUL BIRMINGHAM

Post Fri Aug 31, 2012 3:20 pm

Yep...just get secondhand calipers...
User avatar
bimanut
E30 Zone Camper
E30 Zone Camper
Posts: 1194
Joined: Thu Oct 30, 2008 11:00 pm
Location: Warrington

Post Fri Aug 31, 2012 3:22 pm

siezed nipples should come undone with a little heat.As for the one with a snapped nipple for the all the hassle of trying to get it out i`d just buy a second hand unit some one on here should be able to see you right :)
Image
Motorhole
E30 Zone Addict
E30 Zone Addict
Posts: 2395
Joined: Tue Jul 12, 2005 11:00 pm
Location: Cheshire

Post Fri Aug 31, 2012 3:43 pm

You can buy brake nipples on their own, provided you know the sizes - I don't know the E30 ones off hand but I'm sure someone here does. Havn't had a problem removing snapped nipples before, using the hammer & torx bit solution, but I guess there's always a first!
scjimbo
E30 Zone Camper
E30 Zone Camper
Posts: 1249
Joined: Thu Feb 09, 2012 11:00 pm
Location: Gloucester

Post Fri Aug 31, 2012 5:24 pm

Motorhole wrote:You can buy brake nipples on their own, provided you know the sizes - I don't know the E30 ones off hand but I'm sure someone here does. Havn't had a problem removing snapped nipples before, using the hammer & torx bit solution, but I guess there's always a first!
flippin heck the poor old torx bits again. I bet you have shares in them winkeye
Topblag
Old Skooler
Old Skooler
Posts: 7095
Joined: Wed Jul 30, 2008 11:00 pm
Location: Fife - You got a problem with that ?

Post Fri Aug 31, 2012 5:52 pm

It's always a good idea to check your nipples each time you have the wheels off. Never seen an E30 brake nipple which won't come out. Seen a load of fuds rounding them off.
1990 325i Cab auto in Alpine White II
1988 Alpina C2.5 moredoor in Black, 71k
1990 325ix, moredoor auto in Laser Blue. 51k
1984 Hartge H35 in Black
2004 996 C4S in Silver 43k manual
2006 Audi S6 V10 in Black 58k
Motorhole
E30 Zone Addict
E30 Zone Addict
Posts: 2395
Joined: Tue Jul 12, 2005 11:00 pm
Location: Cheshire

Post Fri Aug 31, 2012 5:53 pm

My torx bits are 'ard mate :D
scjimbo
E30 Zone Camper
E30 Zone Camper
Posts: 1249
Joined: Thu Feb 09, 2012 11:00 pm
Location: Gloucester

Post Fri Aug 31, 2012 5:54 pm

Topblag wrote:It's always a good idea to check your nipples each time you have the wheels off. Never seen an E30 brake nipple which won't come out. Seen a load of fuds rounding them off.
I check mine every time the misses is out winkeye :D
Speedtouch
Old Skooler
Old Skooler
Posts: 14129
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Fri Aug 31, 2012 6:06 pm

You can try using an Easy-out (reverse thread) extractor.
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
capri_rob
Married to the E30 Zone
Married to the E30 Zone
Posts: 9678
Joined: Tue Feb 19, 2008 11:00 pm
Location: South Staffordshire

Post Fri Aug 31, 2012 7:11 pm

Theyre stupid money from BMW ( about £5 each IIRC 8O )

For the one thats bust off agreed get secondhand calipers

I had to replace the rears on the bronze turd for that very reason :cry:
Image

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Fri Aug 31, 2012 7:46 pm

If they are seized/tight the best way to do it is take the caliper off and get it in the vice for some gas axe action. Refitting the bleed nipples with grease will stop it happening again. Most mechanics dont have a clue and think excessive force is the only way to remove things, then when it breaks, swear and buy a new one

The thread is M7, cant remember the pitch but its standard, not fine
Farbbm
E30 Zone Newbie
E30 Zone Newbie
Posts: 216
Joined: Sun Feb 24, 2008 11:00 pm
Location: bedfordshire

Post Sun Sep 02, 2012 6:08 pm

Motorhole wrote:You can buy brake nipples on their own, provided you know the sizes - I don't know the E30 ones off hand but I'm sure someone here does. Havn't had a problem removing snapped nipples before, using the hammer & torx bit solution, but I guess there's always a first!
Care to expand on the hammer & torx solution? I've got an idea what your on about but thought I ask the obvious.
Motorhole
E30 Zone Addict
E30 Zone Addict
Posts: 2395
Joined: Tue Jul 12, 2005 11:00 pm
Location: Cheshire

Post Sun Sep 02, 2012 7:28 pm

Brake nipples are soft, torx bits are 'ard...well, decent quality ones are. Find a bit that won't quite fit inside what's left of the brake nipple and tap it in with a hammer so its a tight fit, biting into the soft metal. Don't hit so hard as to damage the thread. Get a ratchet on the bit then wind out the remains of the nipple.
HairyScreech
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6265
Joined: Sun Jan 21, 2007 11:00 pm

Post Mon Sep 03, 2012 1:10 am

And often the act of tapping it in there will free off the thread as well, its a bit of a hack method however it works, and sometimes that's just what you need.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822

m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
Farbbm
E30 Zone Newbie
E30 Zone Newbie
Posts: 216
Joined: Sun Feb 24, 2008 11:00 pm
Location: bedfordshire

Post Mon Sep 03, 2012 12:16 pm

Excellent, I thought that was the method used.